• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.183-187
• /
• 2012

In the present study, a feasibility study on an innovative satellite attitude control actuator is performed. The actuator is specially designed to generate the reaction torque in an arbitrary axis, so that a satellite attitude can be controlled by using itself. It consists of a spherical flywheel and electromagnets for levitation and rotation control of the ball. As the earlier study, a rotating performance test on the spherical actuator is conducted in a single rotating axis and vertical levitation condition. From the test results, it can be confirmed that the maximum speed and torque of the innovative device are 7,200rpm and 0.7Nm, respectively. Using torque-voltage characteristics of the spherical motor, an open-loop control (V/f constant control) is performed, and the test results show excellent control performance in acceleration and deceleration phases.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.42-47
• /
• 2008

This paper reports the system performance of a hybrid plant, which combines a renewable energy plant of GSHP(Ground Source Heat Pump) with a conventional plant (screw water chiller). To find out operational cost and operating characteristics, the performance of the hybrid system was measured in a building located in Jeju island. Based on the measured data, the operating characteristics were analyzed and the operational cost was estimated by using payment table, which was provided by the Korea Electric Power Cooperation. Operating methods to save energy were recommended.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.168-169
• /
• 2019

본 논문은 친환경자동차용 저전압 DC-DC 컨버터(Low-voltage DC-DC converter, LDC)의 고전력밀도 달성을 위한 스위칭 주파수 선정 및 구조 설계 방법을 소개한다. 위상천이 풀-브릿지(Phase-Shift Full-Bridge, PSFB) 컨버터의 손실 분석을 통해 스위칭 주파수 700kHz 선정하였으며, 냉각수 온도 65℃, 분당 8리터의 유량 기준으로 소자 온도가 110℃ 이내로 관리 되도록 고려하여 구조 설계를 수행했다. 온도 조건을 만족하면서 8kW/L의 높은 전력밀도를 달성하였으며 입력전압 200V-310V, 출력전압 12.8V-15.1V의 전압 범위를 만족하는 1.8kW 최종 시작품을 제작하여 실험으로 검증하였다.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.352-357
• /
• 2007

The objective of this study is to find the optimal set-point of a hybrid Plant, which is combined by renewable energy plant of the GSHP(Ground Source Heat Pump) and the conventional plant(chiller, boiler). The work presented in this study was carried out by using the EnergyPlus(Version 2.0). In order to validate the simulation model, field data were measured from a building. The GSHP was used as a base plant and the conventional plant as the assistant plant. Various temperatures were controlled (zone summer set-point, zone winter set-point, chilled water temperature, hot water temperature) to find the optimal set-point temperature of the system. The influence of the various set-points were analyzed seasonally.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.516-521
• /
• 2003

Optimal conditions of protoplast isolation from the seaweed Prophyra pseudolinearis have been described. The P. pseudolinearis is one of indigenous and dominant Porphyra species in the East Sea region. Protoplasts have been released by enzymatic treatment of 2% agarase and 2% hemicellulase in 25mM MES buffer, pH 6.0 containing 0.5 M sorbitol. The protoplasts could be fused with neutral red-stained protoplasts of P. okamurae by the addition of polyethylene glycol 8000 solution.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.351-356
• /
• 2010

Brachypodium distachyon is rapidly emerged in biological study and has been currently used as a model system for genetics and functional studies for crop improvement and biofuel production. Phosphinothricin (PPT) has been widely used as a selectable agent, which raises ammonium content and induces toxicity in non-transformed plant cells. However PPT selection is not much effective on Brachypodium callus consequently reducing transformation efficiency. In order to identify the efficient conditions of PPT selection, calli obtained from mature seeds of Brachypodium (PI 254867) were cultured on the callus inducing medium (CIM) or regeneration medium (ReM) containing serial dilutions of the PPT (0, 2, 5, 10, and 15 mg/l) in dark or light condition. Callus growth and ammonium content of each treatment were measured 2 weeks after the treatment. Although callus growth and ammonium content did not show much difference in CIM, slow callus growth and increased ammonium accumulation were found in ReM. No significant difference of ammonium accumulation in response to PPT was found between dark and light conditions. In order to identify major factors affecting increased ammonium accumulation, callus was cultured on the media in combined with phytohormones (2,4-D or kinetin) and carbon sources (sucrose or maltose) containing with PPT (5 mg/l). The highest ammonium content in callus was found in the kinetin and maltose media.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.348-349
• /
• 2019

본 논문은 전기자동차용 8.1kW/L의 높은 전력밀도를 갖는 저전압 DC-DC 컨버터(Low-voltage DC-DC converter, LDC)의 설계 방법을 제안한다. 넓은 전압범위에서 높은 전력밀도를 성취하기 위해 위상천이 풀-브릿지(Phase Shift Full-Bridge, PSFB) 컨버터의 2차측 토폴로지 후보군의 비교를 통해 전류-더블러 토폴로지로 토폴로지가 선정되었다. 또한 자속 상쇄 기법이 적용된 매트릭스 변압기를 적용한 PSFB 컨버터와 냉각기의 구조설계를 통해 8.1kW/L의 전력밀도를 달성하였으며 1.8kW 시작품을 제작하여 성능을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.68-70
• /
• 2019

본 논문은 8.1kW/L($132W/in^3$)의 전력밀도를 갖는 전기자동차(xEV)용 저전압 배터리 충전기(Low voltage DC-DC converter, LDC)를 위한 절연형 DC-DC컨버터의 설계 방법을 제안한다. 전체 부피 중 가장 큰 비중을 차지하는 자성체의 부피를 줄이기 위해 GaN소자를 채택하여 700kHz의 스위칭 주파수를 적용하였으며, GaN 스위치를 고주파에서 원활히 동작시키기 위한 게이트 드라이버를 직접 제작하였다. 또한 자속 상쇄 개념이 적용된 매트릭스 평면 변압기를 설계하여 적용함으로써 변압기의 부피를 크게 줄일 수 있었고, 8.1kW/L의 전력밀도를 달성하였다. 본 논문에서는 후보 토폴로지들의 비교를 통해 고 전력 밀도에 가장 적합한 토폴로지를 선정하였으며, 자속 상쇄 기법이 적용된 매트릭스 평면 변압기의 설계방법을 제안하였다.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3142-3146
• /
• 2011

This paper introduces improved prestressed concrete (PSC) girders for the railway bridges. In order to improve performance of conventional PSC girders, various types of PSC girders are either under development or have already been applied in railway bridges. Incrementally prestressed concrete girder is one of these newly developed girders. According to the design concept, these types of PSC girders have the advantages of requiring less self-weight while having the capability of longer spans. However, the tensional failure of top flange is one of the critical issues at the first prestressing stage. To effectively provide initial section stiffness of PSC girders, concrete block on the top flange is used in this study. The efficiency of the proposed structures, compared with conventional girders and improved ones, is successfully demonstrated in the example.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.160-160
• /
• 2009

In recent years, the merging of nanomaterials and nano-technology into electro-optic (EO) device technology such as liquid crystal displays (LCDs) has attracted much attention because of their unique electro- and magneto-optic properties and novel display applications. One example of hybrid LC-inorganic systems is semiconductor nanorods added to LC for their strong reorientation effect and tunable refractive index. Doping of nanoparticles in LC or polymers can lead to changes in performance characteristics such as electro-optical, dielectric, memory effect, phase behavior, etc. Due to the tunability of LCDs with mixed inorganic materials, low voltage operation of a LC system can also be achieved using the significant electro-optical effect achieved through suspension of ferroelectric nanoparticles in NLC.