• Korean Journal of Radiology
• /
• v.24 no.12
• /
• pp.1200-1220
• /
• 2023

Dilated cardiomyopathy (DCM) is one of the most common types of non-ischemic cardiomyopathy. DCM is characterized by left ventricle (LV) dilatation and systolic dysfunction without coronary artery disease or abnormal loading conditions. DCM is not a single disease entity and has a complex historical background of revisions and updates to its definition because of its diverse etiology and clinical manifestations. In cases of LV dilatation and dysfunction, conditions with phenotypic overlap should be excluded before establishing a DCM diagnosis. The differential diagnoses of DCM include ischemic cardiomyopathy, valvular heart disease, burned-out hypertrophic cardiomyopathy, arrhythmogenic cardiomyopathy, and non-compaction. Cardiac magnetic resonance (CMR) imaging is helpful for evaluating DCM because it provides precise measurements of cardiac size, function, mass, and tissue characterization. Comprehensive analyses using various sequences, including cine imaging, late gadolinium enhancement imaging, and T1 and T2 mapping, may help establish differential diagnoses, etiological work-up, disease stratification, prognostic determination, and follow-up procedures in patients with DCM phenotypes. This article aimed to review the utilities and limitations of CMR in the diagnosis and assessment of DCM.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2014

To investigate the flame dynamics in an annular combustor with single swirl injector, a 3D large-eddy simulation (LES) and a level-set flamelet turbulent combustion model have been implemented. The LM6000 developed by GEAE has been used as the combustor of concern and boundary conditions are based on experimental data. The strong central toroidal recirculation zone induced by the volume expansion of the combustion gas and the vortex breakdown continuously occurred through the procession of the vortex with decreasing strength, are observed.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.247-253
• /
• 2016

In this study, solid solution heat treatment of consolidated nickel-based superalloy powders is carried out by hot isotactic pressing. The effects of the cooling rate of salt quenching, and air cooling on the microstructures and the mechanical properties of the specimens are analyzed. The specimen that is air cooled shows the formation of serrated grain boundaries due to their obstruction by the carbide particles. Moreover, the specimen that is salt quenched shows higher strength than the one that is air cooled due to the presence of fine and close-packed tertiary gamma prime phase. The tensile elongation at high temperatures improves due to the presence of grain boundary serrations in the specimen that is air cooled. On the contrary, the specimen that is salt quenched and consists of unserrated grain boundaries shows better creep properties than the air cooled specimen with the serrated grain boundaries, due to the negative creep phenomenon.

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.189-195
• /
• 2016

Objectives: A variety of root canal sealers were recently launched to the market. This study evaluated physicochemical properties, biocompatibility, and sealing ability of a newly launched resin-based sealer (Dia-Proseal, Diadent) compared to the existing root canal sealers (AHplus, Dentsply DeTrey and ADseal, Metabiomed). Materials and Methods: The physicochemical properties of the tested sealers including pH, solubility, dimensional change, and radiopacity were evaluated. Biocompatibility was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. For microleakage test, single-rooted teeth were instrumented, and obturated with gutta-percha and one of the sealers (n = 10). After immersion in 1% methylene blue solution for 2 weeks, the specimens were split longitudinally. Then, the maximum length of staining was measured. Statistical analysis was performed by one-way analysis of variance followed by Tukey test (p = 0.05). Results: Dia-Proseal showed the highest pH value among the tested sealers (p < 0.05). ADseal showed higher dimensional change compared to AHplus and Dia-Proseal (p < 0.05). The solubility values of AHplus and Dia-Proseal were similar, whereas ADseal had the lowest solubility value (p < 0.05). The flow values of sealer in increasing order were AHplus, DiaProseal, and ADseal (p < 0.05). The radiopacity of AHplus was higher than those of ADseal and Dia-Proseal (p < 0.05). The cell viability of the tested materials was statistically similar throughout the experimental period. There were no significant differences in microleakage values among the tested samples. Conclusions: The present study indicates that Dia-Proseal has acceptable physicochemical properties, biocompatibility, and sealing ability.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.12-15
• /
• 2004

There are two major approaches to obtain texture template for HTS coated conductor (CC) ---IBAD and RABiTS. CC's with IBAD template showed both longer and higher Ic results so far. IBAD for CC began with YSZ, the processing of which is very slow compared to other processings needed for the fabrication of CC. Because of this very slow processing speed, IBAD with other materials such as Gd$_2$Zr$_2$O$_{7}$(GZO) and MgO have been developed. The processings of IBAD-GZO and IBAD-MgO are known to be up to 3times and 100 times. respectively, as fast as the processing of IBAD-YSZ. IBAD-MgO is very attractive in that the processing is very fast. IBAD-MgO also needs additional buffer layer(s). Many materials are being investigated to be used as a buffer layer on top of the MgO. BaZrO$_3$ (BZO) is a good candidate as the buffer layer on top of the IBAD-MgO because it is chemically stable and does not react with YBCO at high temperatures. It also has good lattice match with MgO. The BZO film has been deposited on single crystal MgO, and YBCO film was deposited on BZO/MgO to investigate the possibility of using BZO as both the buffer and capping layer of the CC.C.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.748-755
• /
• 2012

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.8
• /
• pp.1154-1158
• /
• 2013

Ganciclovir resistance of human cytomegalovirus is associated with mutations in the viral UL97 gene and poses severe problems for immunocompromised patients. In this study, PCR-based restriction fragment length polymorphism and sequencing analyses detected the UL97 D605E mutation in all five clinical isolates from patients with ganciclovir-resistant human cytomegalovirus infection during prolonged ganciclovir therapy, whereas the M460V mutation was only present in 1 of 5 isolates. On the other hand, the detection rates of the D605E mutation in the stored available DNA samples from the donor and allogeneic stem cell transplantation recipients were 66.7% and 93.7%, respectively, suggesting that the presence of D605E mutation was not associated with the ganciclovir exposure. Although the D605E mutation may not be related to ganciclovir resistance, we suggest that this mutation could be an important molecular marker of human cytomegalovirus evolution in East Asian countries. Moreover, the restriction fragment length polymorphism method using the restriction enzyme HaeIII, which is generally used to detect the UL97 A591V mutation, could also detect the D605E mutation and may therefore be a useful tool for future research on the investigation of UL97 gene mutations.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.377-384
• /
• 2004

Annual variations of inorganic nutrients such as nitrate(+nitrite), phosphate and silicate in association with thermocline were investigated in the upper 200 m of the water column at KODES Long-term Monitoring (KOMO) station in the northeast equatorial Pacific from 1995 to 2002. Global climatic disturbances such as El Nino and La Nina, should have affected KODES area during the study period. In 1995-97 and 2000-2002, a thermocline where temperatures rapidly decrease with depth, was formed at 50-70 m water depth. Nutrient depletion, specially for nitrate and phosphate, was extended down to approximately 50 m depth, which coincided with the surface mixed layer depth. In 1998 and 1999, however a very fluctuating thermocline was observed at 20-100 m water depth. In the photic zone (up to 100 m depth), depth integration of nitrate, phosphate and silicate ranged from 2.02 to $23.14\;gN/m^2$, from 0.87 to $4.05\;gP/m^2$ and from 35.67 to $176.21\;gSi/m^2$, respectively. As a result of changes in the water column structures, nutrient concentrations also showed fluctuation parallel to the changes of thermocline in the study area.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.423-435
• /
• 2014

Verifying the similarity of environmental characteristics between an artificial impact site and a preserved or reference site is necessary to quantitatively and qualitatively evaluate the environmental impact of mining activity. Although an impact site (BIS station) and a preserved site (called KOMO station) that have been selected in the Korea manganese nodule contract area may share similar environmental characteristics, similarities in terms of the water column environment between both sites has not been investigated. In this study, we compared the chemical properties of the water columns and sinking particle fluxes between BIS and KOMO stations through two observations (August 2011 and September 2012). Additionally, we observed particle fluxes at the KOMO station for five years (July 2003~July 2008) to understand long-term natural variability. Vertical distributions of water column properties such as dissolved oxygen, inorganic nutrients (N, P, Si), total organic carbon below surface layer (within the depth range of 200 m) were not considerably different between the two sites. Especially, values of water column parameters in the abyssopelagic zone from 4000 m to bottom layer (~5000 m) were very similar between the BIS and KOMO sites. Sinking particle fluxes from the two sites also showed similar seasonality. However, natural variation of particle flux at the KOMO site varied from 3.5 to $129.9mg\;m^{-2}day^{-1}$, with a distinct temporal variation originating from ENSO events (almost forty times higher than a minimum value). These results could provide valuable information to more exactly evaluate the environmental impact of mining activity on water columns.

• Microbiology and Biotechnology Letters
• /
• v.8 no.2
• /
• pp.119-123
• /
• 1980

Culture conditions of yellow pigment in Monascus sp. were studied. According to the studies of culture conditions optimum condition was found to be pH 4.5, 3 days of incubation with 3% of sucrose as carbon source, 0.2 ％ of yeast extract as nitrogen source and 75m1 of medium in the 500m1 erlenmyer flask by rotary shaking (rpm 180) at 180 r.p.m. Effective levels of inorganic compounds were found to be 0.25 % of potassium phosphate monobasic and 0.1 ％ of Magnesium sulfate.