• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.473-474
• /
• 2016

본 연구에서는 흉물스러운 외관으로 도심의 애물단지로 전락해버린 전주에 대한 인식을 변화시키기 위해 문화콘텐츠 관점에서 전주 디자인을 제시하였다. 여기에서는 문화콘텐츠의 핵심 함의를 대중들과의 경험과 감정의 소통을 긴밀하게 하고, 문화적 의미가 생산 순환하게 하는 창구 역할로 보았다. 이러한 전제 아래 전주 디자인이 가져야 하는 가치 즉, 기능성, 통합성, 연속성, 감응성을 도출하였으며 이를 반영하는 전주 디자인 다섯 가지를 제시하였다.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.255-258
• /
• 2002

We created a new design for an Nd-doped clad-pumped silica fiber laser to enhance the pump absorption and lasing efficiency for a butt-coupled, end-pumped scheme. Two concatenated adiabatic tapers formed within the laser cavity simultaneously removed higher order modes and were spliced to conventional single mode fibers. We theoretically analyzed mode propagation along the composite cavity and experimentally achieved continuous wave oscillation in the $LP_{01}$ mode at $1.06\;{\mu}m$ and a laser output power of over 820 mW with a slope efficiency of 27%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2183-2188
• /
• 2016

This paper deals with the design process for an outer-rotor-type surface-mounted permanent magnet synchronous motor (SPMSM) used in continuous variable valve timing (CVVT) systems in automobiles with internal combustion engines. When the same size, outer-rotor-type SPMSMs generate larger torque and more stable than inner-rotor-type SPMSMs. For the initial design, space harmonic analysis (SHA) is used. In order to minimize the cogging torque, an optimization was conducted using Response Surface Methodology (RSM). At the end of the paper, Finite Element Analysis (FEA) is performed to verify the performance of the optimum model.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.7
• /
• pp.430-436
• /
• 2004

This paper presents an advanced control technique for power density maximization of the Brushless DC (BLDC) generator by using the linear tracking method. In a generator of given rating, the weight and size of the system affect the fuel consumption directly. Therefore, power density is one of the most important issues in a stand-alone generator. BLDC generator has high power density in the machine point of view and additional increases of power density by control means can be expected. Conventional rectification methods cannot achieve the maximum power possible because of hon-optimal current waveforms. The optimal current waveform to maximize power density and minimize machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation and experimental work. A new simple algebraic method has been proposed to accomplish the proposed control without an FFT which is time consuming and complicated.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.223-225
• /
• 1999

The procedure of optimum design is consist of a system analysis module, an optimum design module and an optimizing method module. In this paper, the method to connect the system analysis module with the optimizing method module using the self script language of OPERA has been provided. Optimum design for a magnet whose central field must be 27 has been carried out with the presented method. OPERA Pre/Post-processor has been used as a system analysis module and mixed decent/gradient method as an optimizing method.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1513-1515
• /
• 2000

In this paper, we studied the $Cu_{2}O$ growing with current at the contacts of copper wires and analyzed surface states and structures, crystalline structures, compositions and thermal characteristics of $Cu_{2}O$ growing wires by using stereo microscope, SEM, metallurgical microscope, EDX and DSC. We expect that the results of this experiment can be applied to the electrical fire investigation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.130-134
• /
• 2010

The effects of design parameters of supersonic ejector system under the assumption of constant pressure mixing were performed. Design parameters were mass flow rate ratio, area ratio between primary and secondary flow, and primary Mach number. 1-D theoretical performance of ejector in terms of pressure ratio and contraction ratio with and without loss mechanism such as diffuser efficiency and friction were considered.

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.32-34
• /
• 1999

We successfully demonstrated a stabilized fiber-optic Mach­Zehnder interferometer filter with continuous tunability. The tunable scheme was achieved with fine wavelength control of an 1.3${\mu}{\textrm}{m}$ tunable laser diode used as a stabilization light source. The transmission wavelength of the tunable filter was shifted linearly with respect to the wavelength change of the stabilization light source.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.5
• /
• pp.338-345
• /
• 2009

c-PMS(collaborative project management system) is a business process(BP) based tool to manage collaborative projects which accomplish common business objectives determined by mutual agreement of companies using limited resources and time. This study analyzes collaborative BP, collaborative projects, and their relation, and proposes the architecture and operation scenario of c-PMS consisted of business process asset management(BPAM) sub-system and project manage(PM) sub-system. BPAM sub-system models private and public BP using a client/server based modeler, defines collaborative BPs process from public BPs, and manages them as companies' asset on a web portal. PM sub-system globally manages collaborative project using planning, execution, monitoring, and analyzing functions.

• Journal of Information Technology Applications and Management
• /
• v.13 no.2
• /
• pp.145-162
• /
• 2006

Despite the careful attention paid by managers and researchers to the effective administration of the S/W Development Project, there are cases where the project goes over-budget or misses deadlines. Existing research blames these problems on task complexity or mismanagement. In order to verify the results that varied according to the fitness between the Task Characteristics and the Project Management Types, a contingency model was employed. The verification of the contingency model demonstrated that the greater the task complexity, the greater the effectiveness of the project coordination, and the lesser the task complexity, the greater the effectiveness of project control. This research is theoretically important in that it develops a composite model to verify the relation between the three factors of Task Characteristics, Project Management Types, and Project Performance that compose the S/W Development Project.