• Title/Summary/Keyword: Homopolar motor

Search Result 15, Processing Time 0.022 seconds

Design and Analysis with the magnetic shape coefficients of Linear Homopolar Synchronous Motor for vehicles (자기부상/추진 일체형 차량용 LHSM의 자기형상계수를 고려한 설계와 특성해석)

  • Jang, S.M.;Jeong, S.S.;Lee, S.H.;Seo, J.H.
    • Proceedings of the KIEE Conference
    • /
    • 1997.11a
    • /
    • pp.22-24
    • /
    • 1997
  • The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings. DC field windings, and the segmented secondary with the transverse bar track. The motor was designed on the base of the performance characteristic equations and the equivalent circuit model, with the coefficients of the magnetic shape. These coefficients were computed from the analytical expressions and examined from FEM analysis. The magnetic equivalent circuit of 3-D model of LHSM was obtained. and this concept provided the equivalent models for 2-D FEM analysis. Therefore, the airgap field, the lift and thrust force were calculated and compared with the results of magnetic equivalent circuit method.

  • PDF

Comparison of Magnetic Field Using Equivalent Reluctance 2D and 3D FEA for Linear Homopolar Synchronous Motor (등가 자기저항 2D와 3D 유한요소해석에 의한 LHSM의 자계 특성 비교)

  • Jang, S.M.;Jeong, S.S.;Yang, H.S.;Ryu, D.W.;Yoon, I.K.;Sung, S.Y.
    • Proceedings of the KIEE Conference
    • /
    • 1999.07a
    • /
    • pp.3-5
    • /
    • 1999
  • The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. Three dimensional model of LHSM provided the equivalent reluctance and PM model for 2D FEA. From these 2D FEA models, when the motor was fed by DC and 3-phase currents, the magnetic field were calculated and compared with the results of 3D FEA.

  • PDF

Determination the appearance coefficients of Linear Homopolar Synchronous Motor for Integrated Suspension/Propulsion System (자기부상 및 추진일체형 LHSM의 자기형상계수 산정)

  • Jang, S.M.;Jeong, S.S.;Lee, S.L.
    • Proceedings of the KIEE Conference
    • /
    • 1998.07a
    • /
    • pp.281-283
    • /
    • 1998
  • The 4-poles LHSM with transverse bar track was designed on the base of the performance equations and the equivalent circuit model. However, the magnetic shape factors, such as Carter's and Green's coefficients, $B_{min}/B_{max}$ and leakage factors, were important in the design and analysis of LHSM. Consequently, these coefficients were computed from the analytical expressions and examined from FEM analysis in detail.

  • PDF

A study of Induction Voltage Regulator Imporvement (동극 및 이극에 의한 유도전 압조정방식)

  • 오상세
    • 전기의세계
    • /
    • v.15 no.5
    • /
    • pp.32-39
    • /
    • 1966
  • This voltage Regulator, which regulates voltage in different way from the conventional regulator, is constructed by circular-plate core type stators and controllers (are similar to rotor of conventional). The principle of this Voltage Regulator is based on the rotating magnetic field theory including peculiar homopolar and heteropolar concept. Comparing with the conventional induction regulator, this regulator need not to have short windings and can cancel armature reaction. Moreover, it is able to decrease the machine noise and control the phase of it freely. And it's efficiency can become more than 95% which almost the same as that of transformer's. By increasing numbers of cores of the same size, the output power can be increased, the insulation can be decreased and high Voltage can directly be connected because applied voltage is distributed to each core. This Voltage Regulator can be also used as a current regulator, a starter a induction motor and a phase transformer etc.

  • PDF

Design and Manufacture of a 10 HP Homopolar Motor with Superconducting Windings (10마력 전초전도 호모폴라 모터의 설계 및 제작)

  • Park, Sang-Ho;Kim, Yung-Il;Lee, Se-Yeon;Jung, Chang-Soo;Lee, Ji-Kwang;Park, Il-Han;Choi, Kyeong-Dal;Hahn, Song-Yop
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1125-1126
    • /
    • 2011
  • 고온 초전도 전력기기는 상전도 전력기기에 비해, 중량과 부피가 작고 전력손실이 거의 없어 효율이 높고 대용량기기에 많은 장점을 지니고 있으며 또한 환경 친화적이다. 대형화가 요구되는 선박추진용 모터를 초전도 모터로 사용할 경우 저속 및 고 토크의 모터를 제작할 수 있고, 계자 권선과 전기자 권선을 초전도 선재로 사용함으로써 높은 전류밀도와 고 자장이 가능하여 고효율 및 소형 경량화 등의 장점이 있다. 그러나 전초전도 모터의 경우 얇은 테이프 형태의 초전도 선재의 특성으로 인해 구리선처럼 가공이 힘들고, 선재를 초전도 상태로 만들기 위한 냉각이 필요하다. 이러한 문제점을 해결하기 위하여 본 연구에서는 동기모터와 선형모터를 혼합하여 고정자에 위치한 racetrack type의 전기자 권선뿐만아니라 회전자에 자기장을 발생시키는 계자 권선도 회전자가 아니라 고정자부분에 위치하므로 구조상 견고하고 냉각등에 장점이 있는 호모폴라 모터를 제안하였으며 자기저항의 변화가 작은 구조로 토크 리플이 작으므로 소음과 진동이 적은 모터를 설계하였다. 설계 결과로부터 호모폴라 모터를 제작하였으며 레이스트렉형과 팬케이크 권선의 임계전류등을 측정하였다. 추후 호모폴라 모터의 성능시험을 진행할 예정이다.

  • PDF