• Title/Summary/Keyword: Homo-polar

Search Result 10, Processing Time 0.027 seconds

Performance Improvement Using Modeling and Simulation of a Homo-polar Generator (단극발전기의 모델링 및 시뮬레이션을 이용한 성능개선)

  • Kim, In-Soo;Seong, Se-Jin
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.12 no.3
    • /
    • pp.213-220
    • /
    • 2007
  • As the equipments with the fast load characteristics become popular, a onboard generator should satisfy the fast response characteristics. This paper describes the modeling, simulation and experiment of the homo-polar generator developed for the fast load. The simulation model of a homo-polar generator with input limiter is developed, and the optimal gain to improve the response characteristics can be determined by simulation and analysis. The improved bandwidth and stability of the developed generator with optimal gain are verified by simulation and experiment.

Novel Pd Catalysts with β-Diketiminates for Homopolymerization of Functionalized Norbornene Derivatives in Water/Organic Mixed Solvents

  • Lee, Eung Jun;Won, Wook Kyoung;Lee, Byoungki;Kye, Youn Hee;Lee, Ik Mo
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.9
    • /
    • pp.2720-2724
    • /
    • 2013
  • Polynorbornenes prepared by vinyl addition pathway are known to have some desirable characteristics for wider application but they have some critical drawbacks such as brittleness, poor solubility and adhesion. In order to improve these drawbacks, extensive research for the successful homo- and copolymerization of polar functionalized norbornene with olefin has been carried out. Even though considerable advance has been achieved in the polymerization of polar functionalized monomers, successful catalytic systems for the homopolymerization of polar functionalized norbornene are rare. In this study, a novel successful catalytic system for the polymerization of polar functionalized norborene is proposed. This system employs Pd ${\beta}$-diketiminate/borate cocatalyst in water/organic mixed solvents and it is unique due to introduction of water as a component of solvents. Polymers obtained in this study show high Mw with narrow PDI. Effects of several reaction parameters to the polymer activity and properties are investigated and optimal catalytic system are proposed.

A Study of Modeling and Transient Characteristics Improvement of High Speed Homo-polar Generator (고속 호모폴라 발전기 모델링 및 과도특성 개선 연구)

  • Kim In-soo;Choi Sang-ho;Oh Sung-up;Seong Se-jin
    • Proceedings of the KIPE Conference
    • /
    • 2004.07b
    • /
    • pp.686-690
    • /
    • 2004
  • This paper describes the performance improvement of transient response and the modeling of small aircraft onboard generator. As the characteristics of the stator coil which are a major parameters of transient response were improved, the characteristics of transient response could be increased, therefore, the improved generator can be satisfied with large and fast load changes. Established the control model of the generator, it could be possible to do the analysis of generator performance, and improve the operational stability of the generator system using the control model.

  • PDF

Smoothing Filter Design Applying a Parameter of a Homo-polar Generator (단극발전기의 내부 인자를 적용한 평활필터 설계)

  • Kim, In-Soo;Seong, Se-Jin
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.12 no.5
    • /
    • pp.409-415
    • /
    • 2007
  • For satisfying a recommended value of the quality factor which is one of the important elements in a filter design, a new design method of smoothing filter using an internal parameter of a homopolar generator is proposed. The method increases the efficiency and minimizes the size of the smoothing filter by removing the damping resistor. By considering the resonant frequency as well as the quality factor, the new method can improve the stability of the system which has high boosting converters with negative resistance characteristics.

Chemically Induced High Pretilt Angle by CN-Containing Polyimide

  • Lee, Myong-Hoon;You, Kwon-Il;Lee, Chang-Jin;Woo, Tae-Ha
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2000.01a
    • /
    • pp.191-192
    • /
    • 2000
  • New copolyimides containing nitrile side group were synthesized from copolymerization of pyromellitic dianhydride, m-phenylene diamine and 3,5-diaminobenzonitrile and subsequent thermal imidization of the resulting poly(amic acid). Crystallinity, glass transition temperature and initial decomposition temperature of copolyimides were almost identical to those of homo polyimide prepared from PMDA and m-PDA. Change of pretilt angle induced by the orientation layer of resulting copolyimide was investigated by using a nitrile-containg nematic liquid crystal cell after rubbing. As the content of polar nitrile group was increased in the copolymer, pretilt angle was increased from $3.65^{\circ}$ to $6.49^{\circ}$. The mechanism of this was speculated as the dipolar interaction between the liquid crystal and nitrile groups in copolyimide.

  • PDF

Syntheses and Absorption Spectra of Polymethine Cyanine Dyes Such as Squarylium and Croconium Dyes (Squarylium, Croconium계 기능성 색소의 합성과 흡수 스펙트라)

  • 김성훈;한선경;임용진
    • Textile Coloration and Finishing
    • /
    • v.6 no.1
    • /
    • pp.28-32
    • /
    • 1994
  • The synthesis and absorption spectra of squarvlium(SQ) dyes and croconium(CR) dyes were .studied. Absorption spectra of SQ dye in various solvents exhibited a negative solvatochrornism. Thus, it was suggested that the structure of SQ dye may be a highly polar structure. The λ$_{max}$ of CR dyes undergoes a bathochromic shift of about 100nm compared with the corresponding SQ dyes. This shift can be calculated by the Pariser-Parr-Pople molecular orbital method. From the PPP MO calculation results, we found that SQ dye and CR dye have a almost same Highest Occupied Molecular Orbital(HOMO) level(SQ : -8.0eV, CR : -8.09eV). On the other hand, energy levels of Lowest Unoccupied Molecular Orbital(LUMO) of SQ and CR dyes are -4.09eV and -4.13eV respectively. Thus, replacement of five membered ring by four membered ring in SQ dye causes a large bathochromic shift.t.

  • PDF

Design of Active Magnetic Bearing System for Moving Vehicles (이동 차량 탑재용 전자기 베어링 시스템 설계)

  • Kim, Ha-Yong;Sim, Hyun-Sik;Lee, Chong-Won;Kang, Tae-Ha
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.15 no.3 s.96
    • /
    • pp.364-370
    • /
    • 2005
  • The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

A Development Tendency and Feature Study of Generator for Small Aircraft Engine (소형 항공엔진용 발전기 개발동향 및 특성고찰)

  • Kim, In-Soo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.491-494
    • /
    • 2010
  • This paper describes the characteristics of Permanent Magnet Generator(PMG) and Homo-Polar Gnerator(HPG) applied in small aircraft engine. PMG has a advantage of miniaturization and fast bandwidth if it is using the DC/DC converter for power conversion which increases a volume and cost although. On the other hand, HPG has a advantage of simple voltage control accomplished by flux control of field coil. Recently, it is recommended the PMG without DC/DC converter module by reason of the wide range of input voltage of electronic loads and system efficiency.

  • PDF

Design of active magnetic bearing system for moving vehicles (이동 차량 탑재용 전자기 베어링 시스템 설계)

  • Kim, Ha-Yong;Sim, Hyun-Sik;Lee, Chong-Won;Kang, Tae-Ha
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2004.11a
    • /
    • pp.486-489
    • /
    • 2004
  • The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

  • PDF

Effect of Carboxylic Acid Group of Functionalized Carbon Nanotubes on Properties of Electrospun Polyacrylonitrile (PAN) Fibers (기능화된 탄소나노튜브의 카르복실산이 전기방사된 폴리아크릴로니트릴 섬유의 물성에 미치는 영향)

  • Park, Ok-Kyung;Kim, Ju-Hyung;Lee, Sung-Ho;Lee, Joong-Hee;Chung, Yong-Sik;Kim, Jun-Kyung;Ku, Bon-Cheol
    • Polymer(Korea)
    • /
    • v.35 no.5
    • /
    • pp.472-477
    • /
    • 2011
  • To study the effects of the acid group of functionalized MWNT (multiwalled carbon nanotube) on the thermal and mechanical properties of polyacrylonitrile(PAN) nanofibers, acid ($H_2SO_4/HNO_3$) treated MWNT (O-MWNT) were further functionalized by diazonium salt reaction with 5-aminoisophthalic acid (IPA). Compared to O-MWNT, IPA-MWNT with isophthalic acid group showed a better dispersion stability in polar solvents and IPA-MWNT/PAN composite film displayed lower heat of reaction (${\Delta}H$) than that of homo PAN when stabilized under air atmosphere. The continuous electrospun fibers were prepared using a conductive water bath. PAN fibers containing 1 wt% of IPA-MWNT showed an increase of tensile strength by 100% and tensile modulus by 240% compared to the PAN fibers without IPA-MWNT.