• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.44-51
• /
• 2020

The importance of ESS has been emphasized due to stabilization of power demand due to deterioration of network reliability and expansion of renewable energy sources. ESS (Energy Storage System) stores the remaining power and uses it when necessary to meet the power demand, and build the ESS system mainly in conjunction with solar and wind power. In this paper, we propose a home PV Charging Module using the Master-Slave method which is effective for low insolation. After designing the module, Fast MPPT algorithm is applied to generate the maximum output from the nonlinear output characteristics of the PV modules. The average power value for the input of PV Charging Module was 296.90 W and the output power was 289.60 W, which averaged 97.54%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.16-22
• /
• 2016

This paper addresses the load usage scheduling in the HEMS for residential power consumers. The HEMS would lead the residential users to change their power usage, so as to minimize the cost in response to external information such as a time-varying electricity price, the outside temperature. However, there may be a consumer's inconvenience in the change of the power usage. In order to improve this, it is required to understand the pattern of load usage according to the external information. Therefore, this paper suggests a methodology to model the load usage pattern, which classifies home appliances according to external information affecting the load usage and models the usage pattern for each appliance based on a copula function representing the correlation between variables. The modeled pattern would be reflected as a constraint condition for an optimal load usage scheduling problem in HEMS. To explain an application of the methodology, a case study is performed on an electrical water heater (EWH) and an optimal load usage scheduling for EHW is performed based on the branch-and-bound method. From the case study, it is shown that the load usage pattern can contribute to an efficient power consumption.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.147-155
• /
• 2011

For an effective energy management in intelligent buildings it is necessary to gather information about position/absence of people and the level of population. In this paper the smart occupancy detection system based on the active RFID is developed to satisfy such a demand. The performance of the developed system is tested and verified through various experiments. Furthermore the feasibility test of the active RFID tag is performed to verify whether it can be used as a location-based occupancy sensor. The developed core technology can be also applied to other fields such as security, healthcare, smart home, etc.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.15-22
• /
• 2006

Nowadays, there is called energy saving, that it is accomplished with a lot study and application development as according to demand of all around world. It is using to network device of wire or wireless such as internet, lan, plc, and zigbee and that we should be accomplished to study about method that spending a little cost to fatal error in control system that be expected of frequent occurrence on network, and that have method to do construction a little bit tried out. Also, in that such a embedded system with network function case, there is important thing that it is remote management to network node and control methods to trust because firmware upgrade have the advantage of more than the other device. In this paper, we have verified through a result of experiment for efficient remote management and control method as previously stated in this paper, that it is area of the PLC for sensor node and doing management to relay, and implementation of the LACC which is core part of the ESS, and in order to get a result to trust from doing analysis of capacity and test.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.68-77
• /
• 2018

Regarding demand response (DR) by residential users (R-users), the users try to reduce electricity costs by adjusting their power consumption in response to the time-varying price. However, their power consumption may be affected not only by the price, but also by user convenience for using appliances. This paper proposes a methodology for appliance scheduling (AS) that considers the user convenience based on historical data. The usage pattern for appliances is first modeled applying the copula function or clustering method to evaluate user convenience. As the modeling results, the comfort distribution or representative scenarios are obtained, and then used to formulate a discomfort index (DI) to assess the degree of the user convenience. An AS optimization problem is formulated in terms of cost and DI. In the case study, various AS tasks are performed depending on the weights for cost and DI. The results show that user convenience has significant impacts on AS. The proposed methodology can contribute to induce more DR participation from R-users by reflecting properly user convenience to AS problem.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.117-123
• /
• 2012

For an effective energy management in intelligent buildings it is necessary to gather information about position/absence of people and the level of population. In this paper the smart occupancy detection system using the active RFID is developed to satisfy such a demand based on the results of previous research. First of all the design considerations and functions of the system are introduced. In sequence the functions of the system is presented, and then the performance of the developed system is tested and verified through various field tests. The developed core technology can be also applied to other fields such as security, healthcare, smart home, etc.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2013

Problems of housing, healthcare, social exchanges, and lonely feelings of vulnerable social groups such as the elderly living alone in rural and fishing villages should be resolved by guaranteeing minimum residential rights and levels to restore the sense of self-esteem and social stability and to maintain the rural communities and these should be the object of social interest and support. The housing problems of rural and fishing villages should be resolved not through supply to meet demand but by beginning with providing the ways to attain mutual interaction through the program that recognizes housing as merit goods to maintain the regional communities This research examines more minutely the problems caused by poor housing conditions of rural and fishing villages and attempts to present rural and fishing village type community living home as an alternative through regeneration. The results of this research are as follows. First, the administrative support system should be built to support the community living home in its beginning, process, completion, and even post management. Second, education for reinforcing capabilities to help understand the community living home should continually conducted on the occupants, villagers, and related organizations. Third, in order to expand the community living home, research and development should be made so that the zero-energy house, the alternative energy utilizing house, etc. can be widely used. In building community living home for vulnerable social groups in rural and fishing villages, practical alternatives suitable to the regional realities should be presented and practiced so that the community living home can be built to the satisfaction of all the villagers and the occupants, and the improvement measures should be presented through constant interest and monitoring.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1433-1439
• /
• 2012

This paper introduces a sensor system based on indoor locations in order to implement the Building Energy Management System. This system consists of a thermopile sensor and an ultrasonic sensor. The sensor module is rotated by $360^{\circ}$ and yawed up-and-down by two electric motors. Therefore, it can simultaneously detect the number and location of the inhabitants in the room. It uses wireless technology to communicate with the building manager or the smart-home server, and it can save electric energy by controlling the lighting system or heating/air conditioning equipment automatically. We also demonstrate the usefulness of the proposed system by applying it to a real environment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.833-834
• /
• 2016

최근 에너지 시장의 흐름은 공급위주에서 효율위주로 이동함에 따라 가정 내에서 스마트 그리드와 연동하고 태양광 및 에너지저장시스템을 활용한 에너지 관리 시스템 기술에 대한 연구와 개발이 활발히 진행되고 있다. 하지만 시중에서 판매되는 제품은 인터페이스를 갖추고 있지 않거나 제조사별 독자 프로토콜 사용으로 인한 기존 홍 네트워크와 호환성 문제를 가지고 있다 본 논문에서는 호환성 향상을 위한 SEP2.0 기반의 흉 에너지 관리 시스템 개발과 에너지 관리 스케줄링에 대해 기술하고자 한다.