• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.521-526
• /
• 2006

A membrane bioreactor (MBR) is an effective tool for wastewater treatment with recycling. MBR process has several advantages over conventional activated sludge process (ASP); reliability, compactness, and quality of treated water. The resulting high-quality and disinfected effluents suggest that MBR process can be suitable for the reused and recycling of wastewater. An anoxic/oxic (A/O) type MBR was applied to simultaneous removal of organics and nutrients in sewage. At first, the efficiency of submerged MBR process was investigated using a hollow fiber microfiltration membrane with a constant flux of $10.2L/m^2{\cdot}h$ at each solids retention time (SRT). Results showed that protein/carbohydrate (P/C) ratio increased and total extracellular polymeric substances (EPS) remained constant with SRT increased. Secondly, A/O type MBR with a reverse osmosis (RO) membrane was employed to treat the municipal wastewater. The performance of A/O type MBR-RO process is better for the treatment of organics and nutrients than ASP-MF-RO process in terms of consistent effluents quality.

• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.180-184
• /
• 2003

Ce-doped $Y_2$SiO$_{5}$ phosphor particles of spherical morphology, fine size, high crystallinity and high photoluminescence (PL) intensity were prepared by spray pyrolysis. When nitrate precursor solution is adopted, hollow particles were formed by uneven drying rate between surface and inside of droplet. Citric acid and ethylene glycol were introduced as polymeric precursor to control the morphology of particles. When polymeric solution is adopted, polymeric chain is formed by the esterification reaction between carboxyl and hydroxy groups of citric acid and ethylene glycol, and considered as controlling the drying characteristics of droplet. $Y_2$$SiO_{5}$ :Ce phosphor particles prepared from polymeric precursor solution were spherical, filled, fine size and not agglomerate before and after post heat treatment. The optimum doping concentration of cerium was 0.5 mol% of overall solution concentration. The optimum amount of TBOS of high PL intensity and pure crystallinity of X2-type $Y_2$$SiO _{5}$ was 105% of stoichiometric amount. The PL intensity of $Y_2$X$/_{5}$ :Ce phosphor particles prepared using the polymeric precursor solution was 164% of that of the nitrate precursor solution due to homogeneous composition and good morphology.y.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.07a
• /
• pp.1-12
• /
• 2002

Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2007

A Meshfree is a method used to establish algebraic equations of system for the whole problem domain without the use of a predefined mesh for the domain discretization. A point interpolation method is based on combining radial and polynomial basis functions. Involvement of radial basis functions overcomes possible singularity Furthermore, the interpolation function passes through all scattered points in an influence domain and thus shape functions are of delta function property. This makes the implementation of essential boundary conditions much easier than the meshfree methods based on the moving least-squares approximation. This study aims to investigate a stress analysis of structural element between a meshfree method and the finite element method. Examples on cantilever type plate, hollow cylinder and stress concentration problems show that the accuracy and convergence rate of the meshfree methods are high.

• Advances in concrete construction
• /
• v.9 no.1
• /
• pp.83-92
• /
• 2020

The use of spliced reinforcing bars in sustainable concrete members to manage inadequate bars length is a common practical issue which is may be due to some limitations. The lap splicing means two bars overlapped in parallel with specified length called the splice length in order to provide the required bond between the two bars. The bond between sustainable concrete and spliced steel bars is another important issue. The normal strength sustainable concrete specimens of sizes 1700×150×150 mm with tension reinforcement lap spliced were selected according to testing device length limitations. These members were designed to fail in flexure in order to investigate the lap spliced tension bars effect. The selected lap spliced tension bars were of 10 mm size with smooth and deformed surfaces in order to investigate the surface nature accompanied with the splice nature. The sustainable concrete mechanical properties and mix workability were also studied. This study reveals that the effect of number of spliced bars on the response of beams reinforced with smooth bars is found to be more obvious than deformed one. Finite element modeling in three dimensions was carried out for the tested beams using ABAQUS software. A parametric study is carried out using finite elements on considering the following parameters, concrete compressive strength, load type and opening in cross section (hollow section) for weight reduction purposes.The laboratory and numerical results show good agreements in terms of ultimate load and deflection with an average difference of 10% and 15% in ultimate load and deflection respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8274-8283
• /
• 2015

Gas springs of the television is to control the piston speed when operating under along stroke(200~300 mm, television elevation)is possible. User by this principle is capable of elevation adjustment. First carried out a flow analysis of the piston. A piston speed adjustment technique for precise pipe type cross-section was examined. The piston structure for flow rate control and elevation action is proposed. This study is the development of a gas spring of more than 50 inch television with a large television stand. Hollow piston rod for optimal control(the outer diameter 19.9 mm, the inner diameter 13.9 mm) was injected into the nitrogen gas(0.3 mm/s) in. As a result, the flow rate the pressure drop of the piston rod as the increase was increased without any change of the external force. As a result, control of the displacement via the gas spring is possible.

• Tribology and Lubricants
• /
• v.22 no.4
• /
• pp.190-195
• /
• 2006

A simple and effective analysis method is presented for gaining a complete transient temperatures on the internal and external surfaces of a 40 mm gun tube subjected to a series of rapid firings. Two series of temperature data for both Hs and As were measured by using two rapid response k-type surface thermocouples near the firing origin and the muzzle. With other available temperature data, patterns of temperature variations of the gun tube as a function of time variable were driven through complete evaluations of the data. It is found that overall temperature gradients which increase exponentially toward saturation temperature, actually consist of a series of linear temperature gradients corresponding to the firing sequences. Under the similar firing sequences, patterns of temperature variations fur both the surface temperatures near the chamber and those near the muzzle were found to have linear temperature gradients with different values and the same response frequencies, i.e. they had peaks and lows in temperatures at the same time. The resultant complete temperature data can be used as the fundamental bases for analysis of thermoelastic properties of the materials such as thermal strain and stress, and f3r the prediction of cannon tube life-time through calculation of wear rate.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.104-104
• /
• 2012

아웃도어용 스포츠웨어 의류분야는 소비자들의 욕구가 기능성, 착용감, 패션성을 매우 중시하는 고감성, 고기능성 제품특성을 요구하고 있으며 이를 가장 충족시킬 수 있는 패션 트랜드로서 보온, 경량화 제품이 가장 급부상하고 있는 아이템이다. 경량성의 쾌적 스포츠 웨어에 사용되는 주요 합섬소재인 PET, Nylon을 이용하여 소재의 세섬화, 중공 소재를 통한 제품 개발이 대부분으로 보온, 경량, 속건 등 의복에서의 쾌적 기능성을 개선하기 위하여 개발되는 소재 및 제품의 경량화, 보온 및 흡한속 건성 부여를 통한 기능 요소와 신질감 발현의 촉감요소를 통한 차별화 된 제품개발이 요구되고 있다. 보온 기능성을 부여하는 기술로써 가장 일반적인 기술은 섬유 내부에 중공을 형성하여 경량성과 보온성을 동시에 가지는 기능성 원사 제조 기술과 섬유 내에 열에너지를 흡수할 수 있는 물질을 넣어 외부의 태양광을 섬유내로 흡수하여 열에너지로 전환, 축적함으로서 보온성을 향상시키는 방식이 있다. 주로 경량 보온의 동시 발현을 위하여 중공 형성을 통한 보온 소재 개발이 활발하게 일어나고 있는 실정이다. 가장 많은 수요를 차지하고 있는 경량 보온성 중공사의 경우, 강도 저하, 염색 불량 등의 공정 애로점이 발생하며, 제직 및 가공 공정 시 원사 내 중공이 찌그러짐이 발생하므로 완제품 제조 후에는 중공의 기능이 제대로 발현되지 못하는 문제가 발생한다. 또한 알칼리 또는 용제를 사용하여 후용출 하는 중공사의 경우, 공정이 복잡함은 물론 환경에 유해한 공정이다. 특히, 감량 후 직물의 인열강도는 감량 전과 비교하여 감소하게 되는데 이는 이용성 polymer가 용출되면서 생긴 중공에 의해 섬도가 감소되어 강도가 저하됨을 알 수 있다. 따라서 Sheath 부분에 최대한 손상을 주지 않으면서 Core 부분을 완전 용출 시킬 수 있는 감량 조건을 확보할 필요가 있다. 이에 보온성, 경량성의 기능을 극대화시키고, 중공률 유지하는 최적 용출 가공 조건을 확립하고자 연구하였다.

• Korean Journal of Ichthyology
• /
• v.11 no.2
• /
• pp.126-133
• /
• 1999

Ultrastructure of the zona radiata and the micropyle of ripe eggs in the rainbow trout (Oncorhynchus mykiss), catfish (Silurus asotus) and loach (Misgurnus anguillicaudatus) were examined by light, scanning and transmission microscopes. The egg micropyle of rainbow trout and catfish consists of a funnel-shaped vestibule and a tapered canal transversing the zona radiata. The micropyle of rainbow trout and catfish showed the similar structure with flat pit and long canal. The micropylar wall showed the clockwise spiral structure in rainbow trout. The micropyle of the loach showed the type with a hollow pit leading into a short canal and the micropylar wall showed the counterclockwise spiral structure. There are numerous and various size pores at the surface area around the opening in every experimented fish. Interconnecting ridges were observed in the unfertilized eggs of every fish.

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.459-472
• /
• 2015

Weathering hollows which develop on various rocks are the terrain whose lithological characteristics and formation of the bed rock is under active discussion. The shore in Dapyeong-ri, Sacheon-si has alternation of strata of pelite and sandstone, and the weathering hollows develop on the shore platform and the sea cliff where sandstone is exposed. To analyze the development characteristics of weathering hollows by development of joints, interpenetration of veins and physical and chemical features of the stone, the study conducted a topographic investigation, XRD analysis and an observation using a polarizing microscope. As the result of the investigation and analysis, tafoni and gnamma are spread in the same area and new tafoni is being formed as the existing weathering hollows are destroyed by the expansion and growth of the joint. The vein, which was found to be a quartz vein, may accelerate the development of weathering hollows combining with the joint but may also hamper their growth if the veins are penetrating perpendicularly. It is generally known that weathering hollows develop regardless of the type of rocks, however, the analysis on the lithological features show that the development is limited on the fractured and broken rocks.