• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.132.1-132.1
• /
• 2009

• Computers and Concrete
• /
• 제14권5호
• /
• pp.613-633
• /
• 2014

A double-skinned composite tubular (DSCT) column, which consists of concrete and inner and outer tubes, was finally developed to overcome the weaknesses of concrete filled tube columns by reducing the self-weight of the column and confining the concrete triaxially. Research pertaining to the stiffness and strength of the column and the confining effect in a DSCT column has been carried out. However, detailed studies on the confining stress, especially the internal confining stress in a DSCT column, have not been carried out. Internal and external confining stresses should be evaluated to determine the effective confining stress in a DSCT column. In this paper, the confining stresses of concrete before and after insertion of an inner tube were studied using finite element analysis. The relationship between the internal or external confining stresses and the theoretical confining stress was investigated by parametric studies. New modified formulae for the yield and buckling failure conditions based on the formulae suggested by former researchers were proposed. Through analytical studies, the modified formulae were verified to be effective for economic and reasonable design of the inner tubes in a DSCT column under the same confining stress.

• 한국강구조학회 논문집
• /
• 제22권6호
• /
• pp.609-616
• /
• 2010

이 논문은 600MPa급 고강도강이 원형강관 건축구조용으로 이용될 때 중심압축재의 좌굴강도에 관하여 수치해석적으로 조사한 것이다. 600MPa급 고강도강의 소재인장시험 결과로부터 중심압축재의 좌굴강도를 산정하였으며, 좌굴강도 산정에는 Beam-Column이론에 근거한 방법과 Tangent Modulus 이론에 의한 양자의 방법을 이용하였다. 그리고 소성흐름이 없는 인장시험의 응력-변형도 관계를 비례한도의 크기와 비례한도에서 항복점에 이르는 접선계수의 기울기로 근사시키고 좌굴강도 미치는 영향인자를 조사하였다. 600MPa급 고강도강에 적용되는 현재의 건축기준은 압축재의 경우 항복강도 Fy값을 480Mpa 까지 상향조정하여도 무리가 없다고 사료된다.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.431-452
• /
• 2014

The present study focuses on the mechanical behaviour of concrete filled double skin steel tubular (CFDST) stub columns confined by fiber reinforced polymer (FRP). A series of axial compression tests have been conducted on two CFDST stub columns, eight CFDST stub columns confined by FRP and a concrete-filled steel tubular (CFST) stub column confined by FRP, respectively. The influences of hollow section ratio, FRP wall thickness and fibre longitudinal-circumferential proportion on the load-strain curve and the concrete stress-strain curve for stub columns with annular section were discussed. The test results displayed that the FRP jacket can obviously enhance the carrying capacity of stub columns. Based on the test results, a new model which includes the effects of confinement factor, hollow section ratio and lateral confining pressure of the outer steel tube was proposed to calculate the compressive strength of confined concrete. Using the present concrete strength model, the formula to predict the carrying capacity of CFDST stub columns confined by FRP was derived. The theoretically predicted results agree well with those obtained from the experiments and FE analysis. The present method is also adapted to calculate the carrying capacity of CFST stub columns confined by FRP.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.441-456
• /
• 2023

Aiming at the development trend of light weight and high strength of engineering structures, this paper experimentally investigated the seismic performance of circular-in-square high-strength concrete-filled double skin steel tubular (HCFDST) stub columns with out-of-code width-to-thickness (B/t) ratios. Typical failure mode of HCFDST stub columns appeared with the infill material crushing, steel fracture and local buckling of outer tubes as well as the inner buckling of inner tubes. Subsequently, the detailed analysis on hysteretic curves, skeleton curves and ductility, energy dissipation, stiffness degradation and lateral force reduction was conducted to reflect the influences of hollow ratios, axial compression ratios and infill types, e.g., increasing hollow ratio from 0.54 to 0.68 and 0.82 made a slight effect on bearing capacity compared to the ductility coefficients; the higher axial compression ratio (e.g., 0.3 versus 0.1) significantly reduced the average bearing capacity and ductility; the HCFDST column SCFST-6 filled with concrete obviously displayed the larger initial secant stiffness with a percentage 34.20% than the column SCFST-2 using engineered cementitious composite (ECC); increasing hollow ratios, axial compression ratios could accelerate the drop speed of stiffness degradation. The out-of-code HCFDST stub columns with reasonable design could behave favorable hysteretic performance. A theoretical model considering the tensile strength effect of ECC was thereafter established and verified to predict the moment-resisting capacity of HCFDST columns using ECC. The reported research on circular-in-square HCFDST stub columns can provide significant references to the structural application and design.

• Steel and Composite Structures
• /
• 제1권4호
• /
• pp.393-410
• /
• 2001

In an experimental and analytical study on the structural behavior of slender circular steel-concrete composite columns, eleven specimens were tested to investigate the effects of three ways to apply a load to a column. The load was applied eccentrically to the concrete section, to the steel section or to the entire section. Three-dimensional nonlinear finite element models were established and verified with the experimental results. The analytical models were also used to study how the behavior of the column was influenced by the bond strength between the steel tube and the concrete core and the by confinement of the concrete core offered by the steel tube. The results obtained from the tests and the finite element analyses showed that the behavior of the column was greatly influenced by the method used to apply a load to the column section. When relying on just the natural bond, full composite action was achieved only when the load was applied to the entire section of the column. Furthermore, because of the slenderness effects the columns did not exhibit the beneficial effects of composite behavior in terms of increased concrete strength due to the confinement.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.705-714
• /
• 2012

프리캐스트 중공 사각형 철근콘크리트 교각에 대하여 준정적 실험을 수행하여 내진성능을 검증하였다. 기둥 실험체는 프리캐스트 세그먼트를 접합하고 나서, 미리 배치된 쉬스관에 축방향 철근을 연결 없이 연속으로 배치한 후 모르타르로 그라우팅하는 방법으로 제작하였다. 실험의 주요변수는 형상비, 축방향 철근비, 횡방향 철근량, 프리캐스트 세그먼트의 접합위치이다. 기둥 실험체의 형상비는 4.5와 2.5, 축방향 철근비는 1.15%와 3.07%로 각각 두 가지의 값을 가진다. 횡방향 철근량은 도로교설계기준에서 규정하고 있는 완전연성 설계에 요구되는 양의 99%, 55%, 50%, 27%로 배근되었다. 소성힌지 구역에서의 프리캐스트 세그먼트 접합위치는 기둥 하단에서 기둥단면 두께의 0.5배와 1.0배인 위치로 하였다. 실험 결과로서 균열 및 파괴모드, 축력-휨 강도, 하중-변위 포락선, 변위연성도를 분석하였으며, 도로교설계기준의 연성도 내진설계법을 적용하였을 때의 안전율을 분석하였다. 기둥 실험체는 축방향 철근이 모르타르와 쉬스관에 의하여 구속되고, 쉬스관이 횡방향 철근으로 구속되는 구조로 인하여 큰 변위까지 축방향 철근의 좌굴이 지연되어 연성도가 크게 나타났다.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.215-225
• /
• 2011

일반적으로 프리캐스트 교각은 공장에서 모든 제품을 생산하여 품질의 균질성을 확보할 수 있으며, 고강도 콘크리트를 사용할 수 있어 중공 형태로 블록을 제작할 수 있어 사하중 절감효과가 발생한다. 이러한 프리캐스트 교각 공법은 미국 일본 등에서 이미 실용화하여 적용되고 있는 공법으로 주로 PC 긴장재를 사용한 블록간의 연결에 의해 이루어지고 있다. 하지만, PC 긴장재를 사용하게 되면 과다한 초기 공사비가 소요되어 비경제적 시공이 불가피하다. 본 연구의 목적은 공기 단축과 초기 공사비를 절감하기 위해 PC 긴장재를 사용하지 않고, 슬리브와 일반 철근만으로 구성된 경제적이면서 시공성이 우수한 프리캐스트 교각 공법 개발에 있다. 이를 위해 본 연구에서는 신형식 철근이음 장치인 그라우팅형(形) 슬리브를 이용한 프리캐스트 교각 단면에 대하여 중공율, 주철근 직경, 단면 크기 등을 변수로 총 5개의 축소모형에 대하여 실험적으로 성능을 평가하였으며, 스케일 효과가 배제된 상태에서의 현장 적용성을 살펴보기 위해 최종적으로 성능을 검토하기 위하여 대형모형실험을 통해 교각의 성능을 검증하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.826-835
• /
• 2005

Exposed-type steel column bases are used widely in low-rise building construction. Numerous researchers have examined methods to identify their stiffness and strength, but those studies have heretofore been restricted to in-plane behaviors. This paper presents an experimental investigation of inelastic behaviors of square hollow section (SHS) steel column bases under biaxial bending. Two types of failure modes are considered : anchor bolt yielding and base plate yielding. Different pinching effects and interaction surfaces for biaxial bending are observed for these two modes during bi-directional quasi-static cyclic loading tests. Differences are elucidated using limit analyses based on a simple analytical model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.230-238
• /
• 1996

Recently, square hollow section (S.H.S) is frequently used for column and H-section for beam of steel building structures. The connection between S.H.S column and H-beam is found to weaken the rotational restraint of the joint. Several types of detail to overcome the problem have been suggested for the connection between concrete filled S.H.S column and concrete composited H-bean In this paper, modelling technique to monitor the behavior of the connections is proposed. Then, Drucker-Prager yield criteria is introduced to simulate yield behavior of in-fill concrete while Von-Mises was used in earlier works. Gap-elements are also introduced to simulate the interaction between S.H.S columns and the in-fill concrete as in privious papers. axial forces are applied to S.H.S columns and made to vary in intensity and eccentricity.