• 상하수도학회지
• /
• 제25권3호
• /
• pp.383-390
• /
• 2011

In this study, a process combined biofiltration with sulfur-utilizing autotrophic denitrification and membrane separation was proposed to examine the efficiency of nitrogen removal. As an experimental device, hollow-fiber module was installed in the center of reactor to generate the flux forward sulfur layer in the cylinder packed with granular sulfur. In addition, a simple module was installed in activated sludge aeration tank which inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. The experiment for developing new MBR process was carried out for three years totally. As the results of first two-year experiment, successful nitrogen removal performance was revealed with lab-scale test and pliot scale plant using artificial wastewater and actual plating wastewater. In this year, pilot scale test using actual domestic wastewater was performed to prove field applicability. As the results, high-rate nitrogen removal performance was confirmed with about 0.19 kg ${NO_3}^--N/m^3$ day of rate. Also significant fouling and pressure increase were not found during the experiment. And, the production ratio of sulfate and the consumption ratio of alkalinity showed a slightly higher value about 311 mg ${SO_4}^{2-}/L$ and 369 mg $CaCO_3$/L, respectively. In conclusion, the developed MBR process can be utilized as an alternative for retrofiting existing wastewater plants as well as new construction of advanced sewage wastewater treatment plants, with cost-effective merit.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.439-446
• /
• 2009

This study was performed to evaluate SND(simultaneous nitrification and denitrification)efficiency, nitrogen removal efficiency and filtration function of non-woven fabric by using submerging MBR packed with granular sulfur covered with non-woven fabric filter. Synthetic wastewater was used as influent wastewater. Concentration of $NH_4{^+}-N$ in influent was maintained about 40 mg/L and the experiment was performed in four phases according to the flow rate. Nitrogen loading rate divided four phases ranging from $0.04 kg\;NH_4{^+}-N/m^3-day$ to $0.16 kg\;NH_4{^+}-N/m^3-day$. As a result, the maximum $NH_4{^+}-N$ removal rate was accomplished at $0.142 kg\;NH_4{^+}-N/m^3-day$ in nitrogen loading of $0.147 kg\;NH_4{^+}-N/m^3-day$. Nitrification efficiency was higher than 95% in all phases. $NO_3{^-}-N$ loading rate was adjusted ranging from $0.22 kg\;NO_3{^-}-N/m^3-day$ to $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal rate was accomplished up to $0.71 kg\;NO_3{^-}-N/m^3-day$ in $NO_3{^-}-N$ loading of $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal efficiency was 95% in $NO_3{^-}-N$ loading of $0.22 kg\;NO_3{^-}-N/m^3-day$. T-N removal rate was 90% and concentration of T-N in effluent was 3.7 mg/L in T-N loading rate of $0.039 kg\;NO_3{^-}-N/m^3-day$. In this study, TMP in reactor with and without non-woven fabric filter were observed to define fouling of hollow-fiber membrane module. Reaching time to standard washing pressure(22 cm Hg) of two reactors were 29 days with non-woven fabric But the reactor without non-woven fabric reached standard washing pressure only after 4 days. Accordingly, non-woven fabric was demonstrated the superiority as a filtration ability. With high nitrogen removal rate and decreasing of fouling of membrane, MBR packed with granular sulfur covered with non-woven fabric filter submerging in activated sludge aeration tank can be used as an advanced treatment process.

• 멤브레인
• /
• 제21권1호
• /
• pp.46-54
• /
• 2011

자연유기물을 처리하는 침지형 중공사막 정밀여과 시스템에서 $TiO_2$ 나노입자와 UV를 이용한 광촉매 반응을 적용 시 공기폭기, $TiO_2$ 농도, 용액의 pH 그리고 $Ca^{+2}$의 존재가 자연유기물에 의한 파울링에 미치는 혼합영향을 관찰하였다. 실험결과, $TiO_2$ 나노입자 없이 단순 UV의 조사만으로 자연유기물에 의한 파울링은 약 40% 정도 감소시킬 수 있었다. 또한 UV의 조사 없이 $TiO_2$ 나노입자의 교반만으로 약 25%의 파울링 감소효과를 나타내었다. 공기폭기가 광촉매 반응에 미치는 영향을 확인해 본 결과 공기폭기를 적용해 주지 않은 경우와 비교했을시 공기폭기로 인한 자연유기물의 제거효율은 약 12% 정도 향상되었다. 이는 공기폭기로 인한 분리막 표면으로부터 자연유기물의 물리적인 역수송 보다는 산소공급으로 인해 광촉매 반응이 더욱 향상된 것으로 판단된다. 공기폭기 유량, $TiO_2$ 농도, 용액의 pH 영향정도를 관찰한 결과 공기폭기가 자연유기물 파울링 감소에 미치는 영향이 가장 낮은 것으로 나타났다. 반면, 용액의 pH 경우 낮은 pH (= 4.5)에서 파울링 감소에 미치는 영향이 가장 높은 것으로 관찰되었다. 또한 $TiO_2$ 나노입자 농도가 증가할 수록 파울링 감소효과도 증가하였으며 용액의 pH를 낮출수록 파울링 감소는 증가하였다. 이는 낮은 pH에서 서로 반대전하를 지닌 자연유기물과 $TiO_2$ 나노 입자간의 정전기적인 인력이 증가하여 $TiO_2$ 나노입자 표면에서 자연유기물의 광촉매분해능이 향상된 것으로 사료된다. 또한 자연유기물 중 $Ca^{+2}$의 첨가는 상대적으로 높은 pH (= 10)에서 자연유기물과 $TiO_2$ 나노입자 사이 가교현상을 촉진시켜 $Ca^{+2}$이 첨가되지 않은 경우와 비교시 높은 파울링 감소효과와 자연유기물의 분해효과를 달성시킬 수 있었다.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.301-306
• /
• 2013

본 연구는 퍼클로레이트($ClO_4{^-}$)와 질산염($NO_3{^-}$)의 직접적인 처리방법으로 무산소/호기생물막반응조와 MF막에 의한 연속처리의 적용 가능성을 조사하였다. 생물막 처리공정은 첫 번째 단계로 퍼클로레이트와 질산염의 제거를 위해 무산소생물막반응조를 이용하였고 두 번째 단계로 이화적 퍼클로레이트와 질산염 환원을 위해 사용된 잔류탄소원의 제거를 위해 호기생물막반응조가 도입되었다. 그리고 마지막 단계로 탁도제거를 위해 중공사형 MF막을 적용하였다. 본 연구에서 102 ${\mu}g/L$ $ClO_4{^-}$와 61.8 mg/L $NO_3{^-}$ (14 mg/L $NO_3$-N)가 유입수로 주입되어 퍼클로레이트는 IC 검출농도 이하(5 ${\mu}g/L$ $ClO_4{^-}$)로 제거되었으며 질산염은 최종 처리수의 농도가 4.4 mg/L $NO_3{^-}$ (1 mg/L $NO_3$-N)로 제거되었다. 탄소원으로 사용된 과잉의 179 mg/L 유입 $CH_3COO^-$는 무산소생물막반응조의 유출수에서 117 mg/L, 호기생물막반응조의 유출수에서 11 mg/L로 감소하였다. 3 NTU의 유입 탁도는 무산소/호기생물막반응조의 유출수에서 1.5와 0.3 NTU였으며 최종 MF막의 유출수에서 0.2 NTU였다. 이 결과는 지표수와 지하수에 포함된 저농도 퍼클로레이트와 질산염 오염의 직접적인 처리방법으로 무산소/호기생물막반응조와 MF막의 연속처리가 적용될 수 있음을 의미하는 것으로 사료된다.

• 상하수도학회지
• /
• 제26권5호
• /
• pp.619-627
• /
• 2012

In order to determine reduction of greenhouse gas emissions (GHGs) when the submerged membrane bioreactor with granular sulfur (MBR-GS) is used in wastewater treatment plant (WTP), the amount of GHGs was compared and analyzed in the advanced treatment process of P wastewater treatment plant (WTP). The amount of GHGs was estimated by classifying as construction and operation phase in WTP. The amount of GHGs in construction phase was evaluated from multiplying raw materials by using carbon emission factors. Also the amount of GHGs in operating phase was calculated by using total electricity consumption and carbon emission factor. The construction of anoxic tank and secondary settling tank is unnecessary, because the MBR-GS conducts simultaneously the nitrification and denitrification in aeration tank and filtration by hollow fiber membrane. The amount of $CO_2$, $CH_4$, and $N_2O$ emitted by constructing the MBR-GS was 6.44E+06 kg, 8.16E+03 kg and 1.38E+01 kg, respectively. The result shows that the GHGs was reduced about 47 % as compared with the construction in the MLE process. In operating the MBR-GS, the electricity is not required in the biological reactor and secondary setting tank. Thus, the amount of $CO_2$, $CH_4$, and $N_2O$ emitted by operating in the MBR-GS was 7.39E+05 kg/yr, 5.80E+02 kg/yr and 2.44E+00 kg/yr, respectively. The result shows that the GHGs were reduced about 37 % as compared with the operation in the MLE process. Also, $LCCO_2$(Life Cycle $CO_2$) was compared and analyzed between MLE process and MBR-GS. The amount of $LCCO_2 $emitted from the MLE process and MBR-GS was 3.56E+04 ton $CO_2$ and 2.12E+04 ton $CO_2$, respectively. The result shows that the GHGs in MBR-GS were reduced to about 40 % as compared in the MLE process during life cycle. As a result, sulfur-utilizing autotrophic denitrification process (SADP) is expected to be utilized as the cost-effective advanced treatment process, owing to not only high nitrogen removal efficiency but also the GHGs reduction in construction and operation stage.