• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.772-778
• /
• 2003

Polystyrene foam is easily melted and vapoured by heat, has a proper quality in the pattern manufacturing and has a low price. The objective of this study is to develop a rapid prototyping method fur polystyrene foam pattern manufacuring to use the eliminative pattern casting (EPC). Applying fur the rapid prototyping concept reversely, the unnecessary part of section is vapored away by heat source of laser beam. In order to examine the applicability between laser beam process and polystyrene foam material, the basic experiments such as hole, line, plane and contour process are carried out. With these results, various three-dimensional shape patterns are made and this rapid prototyping tool for polystyrene foam manufacturing.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2014

Laser beam machining has been known as efficient for glass micromachining. It is usually used the ultra-short pulsed laser which is time-consuming and uneconomic process. In order to use economic and powerful long pulsed laser, indirect processing called laser-induced backside wet etching (LIBWE) is good alternative method. In this paper, micromachining of glass using Nd:YAG laser with nanosecond pulsed beam has been attempted. In order to improve shape accuracy, combined processing with magnetic stirrer has been widely used. Magnetic stirrer acts to circulate the solution and remove the bubble but it is not suitable for deep hole machining. To get better effect, ultrasonic vibration was applied for improving shape accuracy.

• Transactions of Materials Processing
• /
• v.12 no.8
• /
• pp.738-743
• /
• 2003

The major problems of a plastic injection mould can be devided into two kinds, one is in mould another in injected parts. Most of defects of the former comes from mould design, such as, structure and working. The latter are weld line, warpage, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems in injection molding are difficult to find the reason because of complexity. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and analizing troubles of the part of Flat TV Front Cover by flow control method and gas-assisted injection moulding. For minimizing defects of the injection moulded parts, computer aided simulation method for injection mould filling was used. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality, such as minimizing surface defects of injection moulding parts and troubles in mould was achieved.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.201-207
• /
• 1999

The automatic pinhole detection system is described. The goal of this project is to study the feasibility test of the new concept for hole detection. The developed method is able to detect almost 50$\mu\textrm{m}$ pinhole by evaluating the shining of the light as if there is pinhole in the strip. Moreover, it is possible to inspect up to the 200$\mu\textrm{m}$ inclined pinhole. The system cosists of three main functional parts: the source part of the light which is using the linear halogen lamp, the image gathering part which is using a line CCD and the image processing part. The light spot can be controlled and optimized corresponding to the situation of the strip. To eliminate back ground noise, the binary image processing method is adopted.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.37-44
• /
• 2003

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace industries, building structures, ship materials, sporting goods and others. It is worth the while to use composite materials as various substitutions when compared With others. But the use is limited in the field of the mechanical processing because of its difficulties in cutting. The surface roughness of in and out in the hole processing was discussed after cutting the GFRP with HSS drill in the vertical machining center. And it is observed that as it processed more, the powdered chip may be got more than the fluid type long chip.

• Laser Solutions
• /
• v.9 no.2
• /
• pp.11-15
• /
• 2006

We report experimental results on the high-speed micromachining using a femtosecond laser (800 nm, 130 fs, 1kHz) and galvanometer scanner system (Raylase, Germany). Periodic hole drilling of silicon and glass with the scan speed of 1-20 mm/s is demonstrated. Finally, we demonstrate the utility of the femtosecond laser application to ITO patterning by using a high-speed femtosecond laser scanner system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.896-905
• /
• 1996

Pressure drop, as a function of air flow, was measured for tomatoes and mandarins in bulk with different sizes, stacking arrangements and bed porosities. Pressure drop was also measured on carton vent holes and on a carton of packed fruits . and the cumulative effects of air flow resistance of vent holes and packed fruits in bulk on the air flow resistance of a carton of fruits were evaluated . Equation were presented to describe pressure drop bulk fruits, of an empty carton and of a carton of packed fruits as related to the air velocity , the bed porosity, the fruit diameter and the opening ratio of the vent hole.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3119-3127
• /
• 2000

This paper is a study to find a new method of feature selection for vibrationof buman body by analyzing correlationof vibration between King Songdok Bell and Human body. The vibration characteristics are analyzed by matching body, vocal tract, diaphragm and asymmetrical clements of human body with Bell, resonator, hole in the ground and asymmetical elements. In the result, the characteristics of sound vibrationof King Songdok Bell is useful to apply it to vibration characteristics of human body because the vibration characteristics of ech elements is alike.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.947-949
• /
• 2015

본 논문은 기존의 시간적으로 이웃한 프레임 사이의 움직임을 추정 보상하여 새로운 프레임을 생성하는 프레임률 향상 기법 (frame rate up conversion)을 제안한다. 움직임 추정(Motion Estimation)을 통하여 계산된 움직임 벡터를 이용하여 프레임을 생성하며, 생성된 프레임에서 발생되는 구명 (hole)과 중첩 (overlap) 영역을 처리하는 기법을 제안한다. 특히 k-NN 보간법(k-nearest neighbor interpolation)[3]과 중간값을 적응적으로 활용하여 향상된 화질의 영상을 생성한다. 실험 결과를 통하여 제안하는 기술의 우수성을 입증하였다.

• Journal of Information Processing Systems
• /
• v.5 no.3
• /
• pp.145-150
• /
• 2009

The awareness of boundaries in wireless sensor networks has many benefits. The identification of boundaries is especially challenging since typical wireless sensor networks consist of low-capability nodes that are unaware of their geographic location. In this paper, we propose a simple, efficient algorithm to detect nodes that are near the boundary of the sensor field as well as near the boundaries of holes. Our algorithm relies purely on the connectivity information of the underlying communication graph and does not require any information on the location of nodes. We introduce the 2-neighbor graph concept, and then make use of it to identify nodes near boundaries. The results of our experiment show that our algorithm carries out the task of topological boundary detection correctly and efficiently.