• 대한한방내과학회지
• /
• 제19권1호
• /
• pp.157-167
• /
• 1998

Background and Purpose : Cerebrovascular reactivity(CVR) can be estimated by measuring the change of cerebral blood flow that occurs during vasostimulation. To estimate the cerebrovascular reactivity, we investigated the change of flow velocity of the middle cerebral artery(MCA) during hyperventilation and hypoventilation with the transcranial doppler. So we studied whether the CVR measured by this method could show a significant difference between the normal and the cerebral infarction subjects and whether the CVR may decrease with age in normal subjects. Methods : Using transcranial doppler, we measured the mean velocity(Vm), the pulsatility index(P.I.) at the resting state, the end of breath-holding and the end of hyperventilation in 36 normal and 10 cerebral infarction subjects, so we calculated the percentile change of mean velocity(%${\Delta}$Vm) and P.I.(%${\Delta}$P.I.) after the vasostimulation. We estimated the change of Vm, P.I., %${\Delta}$Vm and %${\Delta}$P.I. by the age group and compared those parameters between the age-matched normal control and cerebral infarction subjects. Results : The Vm in MCA significantly decreased with age(p<0.05), but there was no significant difference in Vm and P.I. between normal and cerebral infarction subjects. The %${\Delta}$Vm and %${\Delta}$P.I. in response to hyperventilation significantly decreased with age in MCA and there was significant difference in $%{\Delta}Vm$ of MCA after breath-holding between the normal and cerebral infarction subjects. Conclusion : The breath-holding and hyperventilation tests could be non-invasive and useful methods in estimation of the cerebrovascular reactivity and could be applied in the basal and follow-up evaluation of the cerebrovascular reserve of the ischemic stroke patients.

• The Journal of Korean Physical Therapy
• /
• 제25권1호
• /
• pp.23-28
• /
• 2013

Purpose: The purpose of this study was to examine the influence of a handrail (presence and position) on treadmill gait and balance in stroke patients during gait training. Methods: 39 patients with stroke (male 31, female 8) participated in this study. The training groups were classified into a no-handrail group (NHG), front handrail group (FHG), and bilateral handrail group (BHG). Each group comprised 13 subjects. The subjects were trained to walk in a straight path 30 minutes per day for 8 weeks. The Good Balance System was used to measure static balance and dynamic balance. To measure walking ability, timed up and go (TUG) was also assessed. Results: The NHG showed no significant differences in static balance, dynamic balance, and TUG. The FHG was significantly different in their medial-lateral speed of static balance, dynamic balance, and TUG. The BHG was significantly different in their static balance, dynamic balance, and TUG. Conclusion: These findings consider the effects of holding handrails concomitantly with changes in postural stability. We conclude that for training stroke patients, treadmill walking while holding handrails improves balance and gait more than treadmill walking without holding handrails. The resulting changes in muscle activity patterns may facilitate the transfer to a gait pattern. The results of this study suggest methods for training treadmill walking in stroke patients.

• 대한물리의학회지
• /
• 제12권4호
• /
• pp.123-132
• /
• 2017

PURPOSE: This study aimed to examine the effects of lumbar stabilization exercise during abdominal hollowing with conscious contraction of the pelvic floor muscles on trunk muscle in healthy twenties subjects. METHODS: The participants were randomly allocated to an experimental group (n=15) and a control group (n=15). The experimental group received lumbar stabilization exercise combined with conscious contraction of the pelvic floor muscles during abdominal hollowing. The control group received lumbar stabilization exercise with abdominal hollowing. Both groups trained with the respective exercise for 30 minutes a day, 3 times a week for 6 weeks. Muscle activation of the external oblique and erector spinae muscles, thickness of the transversus abdominis and multifidus, and contraction holding time of tranversus abdominis were measured before and after exercise. RESULTS: Activations of both the external oblique muscles were significantly decreased, and thickness of both the transversus abdominis and multifidus muscles, and contraction holding time of the transversus abdominis muscle were significantly increased in the experimental group (p<.05). The thickness of the left transversus abdominis and right multifidus muscles, and the contraction holding time of the transversus abdominis muscle significantly increased in the control group (p<.05). On comparing both groups, the activations of both external oblique muscles were significantly reduced and the contraction holding time of the transversus abdominis muscle was significantly increased in the experimental group (p<.05). CONCLUSION: These results suggest that lumbar stabilization exercise by abdominal hollowing and conscious contraction of the pelvic floor muscles is suitable and efficient for healthy twenties subjects.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.925-936
• /
• 2023

Currently, due to the rapid increase in power demand and the increase in capacity of power converters, the capacity of electromagnetic contactors is also increasing, and the burden on SMPS for the power that can drive them is increasing. Although the initial starting operation current of an electromagnetic contactor is significantly larger than the holding current for maintaining contact, most electromagnetic contactors apply the same voltage as the initial starting operation. An electromagnetic contactor must continuously apply a holding current to maintain the contact point, and the larger the capacity, the larger the current must be applied. This paper proposes a two-level magnetic contactor drive that allows setting the initial starting operation current to fully attach the contact point of the magnetic contactor and the holding current to maintain subsequent operation. In addition, a low-cost drive topology of analog and digital methods was proposed for various field applications, and an algorithm based on the ripple of the excitation current was proposed to determine whether the magnetic contactor was opened or closed without using a separate contact point. The feasibility of the proposed method was proven through Psim simulation experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 2001

Deep drawing process, one of sheet metal forming methods, is used widely. Circular or square shape blanks are currently studied mainly. Especially, circular blank for coating case of chip condenser remains bridges when it is made out of aluminum coil. The bridge reduces Material-withdrawal-rate of aluminum coil to $60\%$. This paper proposes a no-bridge blank instead of circular blank. To get the different values of two cases, comparison circular blank with no-bridge blank is accomplished in the point of thickness strain in the vicinity of flange. In order to find optimal condition in new proposed blank, several process variables - those are blank holder shape, die shape radii, punch shape radii and blank holding force - are changed.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.129-138
• /
• 2014

This paper is to analyze the cycle time of the vendor in a single-vendor multi-buyers supply chain. The vendor is the manufacturer and the buyers are the retailers. The cycle time of the vendor is the elapse time from the beginning time of the production to the beginning time of the next production. The cycle time of the vendor that minimizes the total cost in a supply chain is analyzed. The cost factors are the production setup cost and the inventory holding cost of the vendor, the ordering cost and the inventory holding cost of the retailers. The cycle times of the vendor obtained with the costs of the vendor is compared with those obtained with the costs of the vendor and the retailers. Various numerical examples are tested if the cycle times of the vendor for both methods are the same.

• Journal of the Optical Society of Korea
• /
• 제20권4호
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• 소성∙가공
• /
• 제21권1호
• /
• pp.30-35
• /
• 2012

FIM(Film Insert Molding) is an innovative method of producing decorated parts for a wide range of products. Because it requires fewer steps when compared to conventional production methods, the time and cost of manufacturing high quality components can be reduced considerably. In this paper, the effects of processing conditions on the warpage of film-insert molded plate were investigated by using a design of experiments. The dominant factors affecting warpage were mold temperature and holding pressure. Warpage increased with the temperature difference between stationary mold and fixed one. Even when the mold temperature difference was zero, the plate with a film was bent after ejection such that the film side protruded. As holding pressure increased, warpage decreased significantly. In addition warpage increased with time increment for the film-insert molded plates.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.20-25
• /
• 2009

The quench detection system of the KSTAR (Korea Superconducting Tokamak Advanced Research) primarily uses the resistive voltage measurement due to a quench. This method is to detect the resistive voltage generated by a quench, which is continuously maintained above the preset voltage threshold for a given holding time. As the KSTAR PF (Poloidal Field) coils are operated in the pulse current mode, the large inductive voltages are generated. Therefore the voltage threshold and the quench holding time should be determined by considering both the inductive voltages measured during the operation, and the maximum conductor temperature rise through the quench analysis. In this paper, the compensation methods for minimizing the inductive voltages are presented for the KSTAR PF coils. The quench hot spot analysis of the PF coils was carried out by the analytical and numerical methods for determining the proper values of the quench voltage threshold and the allowable quench protection delay time.

• 한국축산식품학회지
• /
• 제34권5호
• /
• pp.597-603
• /
• 2014

In this study, the physicochemical and sensory quality characteristics due to the influence of various thawing methods on electro-magnetic and air blast frozen pork were examined. The packaged pork samples, which were frozen by air blast freezing at $-45^{\circ}C$ or electro-magnetic freezing at $-55^{\circ}C$, were thawed using 4 different methods: refrigeration ($4{\pm}1^{\circ}C$), room temperature (RT, $25^{\circ}C$), cold water ($15^{\circ}C$), and microwave (2450 MHz). Analyses were carried out to determine the drip and cooking loss, water holding capacity (WHC), moisture content and sensory evaluation. Frozen pork thawed in a microwave indicated relatively less thawing loss (0.63-1.24%) than the other thawing methods (0.68-1.38%). The cooking loss after electro-magnetic freezing indicated 37.4% by microwave thawing, compared with 32.9% by refrigeration, 36.5% by RT, and 37.2% by cold water in ham. The thawing of samples frozen by electro-magnetic freezing showed no significant differences between the methods used, while the moisture content was higher in belly thawed by microwave (62.0%) after electro-magnetic freezing than refrigeration (54.8%), RT (61.3%), and cold water (61.1%). The highest overall acceptability was shown for microwave thawing after electro-magnetic freezing but there were no significant differences compared to that of the other samples.