• PNF and Movement
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2020

Purpose: This study was conducted to examine the effects of a PNF intervention using elastic bands on edema, range of motion (ROM), and pain in post-mastectomy patients with upper limb lymphedema, according to their hand grip type. Methods: The subjects were 14 female patients who were at Stage II lymphedema after undergoing mastectomy for Stage II breast cancer. They were randomly divided into an experimental group (n =7) and a control group (n = 7). Both groups participated in a treatment program four times (one time under the therapist's instructions and three times as self-exercise) a week for 4 weeks. Both groups repeated an upper limb PNF pattern exercise for 30 min using elastic bands after receiving a manual lymph drainage treatment for 1 hour. Here, subjects in the experimental group performed the PNF exercise with an open-hand grip by putting their hands into the loops of elastic bands and keeping their fingers spread out. Subjects in the control group performed the PNF exercise with a closed-hand grip by holding the loops of elastic bands with their fingers. In both groups, the subjects' edema, ROM, and pain levels were measured before the intervention and 2, 3 and 4 weeks after the intervention. Results: As a result of the experiment, both groups demonstrated edema reductions, ROM increases, and pain reductions in four areas of the upper limbs. Notably, the experimental group exhibited larger ROM increases in flexion, extension, and abduction as well as greater edema and pain reductions than the control group. In particular, the most significant effects were found in the elbow of the four upper limb areas for edema reductions and in extension for ROM increases. Conclusion: The present study indicates that exercise therapy-based approaches using elastic bands in post-mastectomy patients with upper limb lymphedema can have different effects depending on the type of hand grip (open or closed), which is the body's most distal part. Therefore, these approaches should be based on the conditions of the distal parts of the patient's body for their effective applications in clinical practice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.701-710
• /
• 2019

Objective: This study investigated the effect of different acute heat stress (HS) levels on chicken meat quality and ultra-structure. Methods: Chickens were randomly divided into 7 groups to receive different HS treatments: i) $36^{\circ}C$ for 1 h, ii) $36^{\circ}C$ for 2 h, iii) $38^{\circ}C$ for 1 h, iv) $38^{\circ}C$ for 2 h, v) $40^{\circ}C$ for 1 h, vi) $40^{\circ}C$ for 2 h, and vii) un-stressed control group ($25^{\circ}C$). Blood cortisol level, breasts initial temperature, color, pH, water holding capacity (WHC), protein solubility and ultra-structure were analyzed. Results: HS temperatures had significant effects on breast meat temperature, lightness ($L^*$), redness ($a^*$), cooking loss and protein solubility (p<0.05). The HS at $36^{\circ}C$ increased $L^*{_{24h}}$ value (p<0.01) and increased the cooking loss (p<0.05), but decreased $a^*{_{24h}}$ value (p<0.05). However, as the temperature increased to $38^{\circ}C$ and $40^{\circ}C$, all the values of $L^*{_{24h}}$, cooking loss and protein denaturation level decreased, and the differences disappeared compared to control group (p>0.05). Only the ultimate $pH_{24h}$ at $40^{\circ}C$ decreased compared to the control group (p<0.01). The pH in $36^{\circ}C$ group declined greater than other heat-stressed group in the first hour postmortem, which contributed breast muscle protein degeneration combining with high body temperature, and these variations reflected on poor meat quality parameters. The muscle fiber integrity level in group $40^{\circ}C$ was much better than those in $36^{\circ}C$ with the denatured position mainly focused on the interval of muscle fibers which probably contributes WHC and light reflection. Conclusion: HS at higher temperature (above $38^{\circ}C$) before slaughter did not always lead to more pale and lower WHC breast meat. Breast meat quality parameters had a regression trend as HS temperature raised from $36^{\circ}C$. The interval of muscle fibers at 24 h postmortem and greater pH decline rate with high body temperature in early postmortem period could be a reasonable explanation for the variation of meat quality parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.585-591
• /
• 2019

Objective: This study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc. Methods: Forty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large $White{\times}Landrace$ pigs sired by Pakchong 5 (LWLRP), and Large $White{\times}Landrace$ pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model. Results: The PP had greater carcass, total lean, and ham percentages than crossbred pigs (p<0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower $L^*$ value than barrows (p<0.05). No meat color parameters ($L^*$, $a^*$, and $b^*$) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05). Conclusion: Pakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.711-720
• /
• 2019

Objective: This study was conducted to assess the effect of potassium humate and enzymes (Xylanase+Amylase+Protease) inclusion in diets on carcass characteristics, meat quality and fatty acid profiles of broilers fed canola-based diets. Methods: Two hundred and twenty broilers randomly allotted to 5 dietary treatments: the control (commercial broiler diet); CM (17.5% canola meal inclusion); CMEnz (17.5% CM inclusion+0.3 g/kg Axtra XAP); CMPh (17.5% CM inclusion+1.5% Potassium Humate, PH); and CMEnzPh (17.5% CM inclusion+1.5% PH+0.3 g/kg Axtra XAP) were slaughtered at day 42 for assessment of carcass and meat quality parameters. Results: Diet had no effect on carcass traits apart from breast muscle weight and breast muscle index. The highest breast muscle weight was observed in broilers fed CMEnz ($487.6{\pm}17.5g$) followed by those fed the control diet ($474.37{\pm}17.5g$). Diet also had no significant dietary effect on pH, temperature, drip loss and shear force values of the breast muscle. However, diet significantly affected meat colour and water-holding capacity. Broilers in the control and CMPh groups ($52.94{\pm}0.67$ and $52.91{\pm}0.67$) had the highest (p<0.05) values for lightness ($L^*$), whilst those fed CMEnzPh had the lowest value ($47.94{\pm}0.67$). In contrast, CM group had the lowest (p<0.05) value for redness ($a^*$) with CMEnzPh group having the highest values. The proportion of polyunsaturated fatty acids (PUFAs), n-6 and n-3 fatty acids and the PUFA/saturated fatty acid ratio were increased in CM-based diets containing enzymes and humic acid. Conclusion: It can, therefore, be concluded that CM can be included in broiler diets in the presence of enzymes and humic acid with positive effects on meat quality and important fatty acids that are beneficial to the health of consumers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.721-733
• /
• 2019

Objective: The objectives of this study were to investigate the thermal gelation properties and molecular forces of actomyosin extracted from two classes of chicken breast meat qualities (normal and pale, soft and exudative [PSE]-like) during heating process to further improve the understanding of the variations of functional properties between normal and PSE-like chicken breast meat. Methods: Actomyosin was extracted from normal and PSE-like chicken breast meat and the gel strength, water-holding capacity (WHC), protein loss, particle size and distribution, dynamic rheology and protein thermal stability were determined, then turbidity, active sulfhydryl group contents, hydrophobicity and molecular forces during thermal-induced gelling formation were comparatively studied. Results: Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed that protein profiles of actomyosin extracted from normal and PSE-like meat were not significantly different (p>0.05). Compared with normal actomyosin, PSE-like actomyosin had lower gel strength, WHC, particle size, less protein content involved in thermal gelation forming (p<0.05), and reduced onset temperature ($T_o$), thermal transition temperature ($T_d$), storage modulus (G') and loss modulus (G"). The turbidity, reactive sulfhydryl group of PSE-like actomyosin were higher when heated from $40^{\circ}C$ to $60^{\circ}C$. Further heating to $80^{\circ}C$ had lower transition from reactive sulfhydryl group into a disulfide bond and surface hydrophobicity. Molecular forces showed that hydrophobic interaction was the main force for heat-induced gel formation while both ionic and hydrogen bonds were different significantly between normal and PSE-like actomyosin (p<0.05). Conclusion: These changes in chemical groups and inter-molecular bonds affected protein-protein interaction and protein-water interaction and contributed to the inferior thermal gelation properties of PSE-like meat.

• Animal Bioscience
• /
• v.34 no.2
• /
• pp.295-305
• /
• 2021

Objective: The objectives of this study were to compare the effects of normal and low protein content (PC) of starter diet supplemented or not with blends of branched-chain amino acids (BCAAs) on growth performance of broilers under summer conditions and to investigate whether these effects altered some quality traits and the characteristics of gastrointestinal tract. Methods: A total of 768 mixed-sex broiler chicks (Ross 308, one-d-old) with an average initial body weight (BW) of 47.6±1.03 g were allocated into six treatments with four replications in 2×3 factorial arrangement. Factors were: PC, normal (N, 22% to d 15); and low (L, 20% to d 15); and added BCAA blends, L-leucine, L-isoleucine, and L-valine at zero (0L:0I:0V); 1.0, 0.25, and 0.25 (4L:1I:1V); or 1.0, 0.25, 0.75 (4L:1I:3V) g/kg of diet. Hence, six dietary treatments were named as N0L:0I:0V, N4L:1I:1V, N4L:1I:3V, L0L:0I:0V, L4L:1I:1V, and L4L:1I:3V. Average indoor temperature and humidity were 32.8℃±1.7℃ and 61.1%±4.12%, respectively. Results: BW, feed conversion ratio (FCR) and carcass weight were not affected by PC, BCCA and their interaction (p>0.05). The L diets decreased the water holding capacity of the breast (p = 0.002) and thigh (p = 0.050) meats and dressing percentage (p = 0.005) compared to the N diets. The 4L:1I:1V diet decreased breast yield compared to the 0L:0I:0V diets (p = 0.041). The effect of PC on feed intake, mortality and gastrointestinal trait weight were depended on the L:I:V ratios under summer conditions due to interactions between factors (p<0.05). The FI and mortality of L4L:1I:1V broilers were lower than those of N4L:1I:1V birds (p<0.05). Conclusion: It was concluded that the blends of BCAAs used failed to improve performance and to promote breast yields, because diets with normal or with reduced protein supplemented or not with BCAAs up to d 15 produced a similar BW and FCR in broilers raised in hot-climate conditions.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1069-1079
• /
• 2022

Objective: The objective of this study was to investigate the effect of 4-month intensive feeding on the meat quality, fatty acid profile, flavor, and growth performance of grazing Hulunbuir sheep (HBS). Methods: The HBS were selected 4-months after birth in a pasture rearing system as the experimental animals (n = 44, female, average body weight 23.8±2.2 kg) then divided equally into pasture-based grazing fattening (PAS) and concentrate-included intensive fattening (CON) groups for another 4-month finishing. When finished fattening, all animals were slaughtered to collect musculus longissimus dorsi subcutaneous adipose tissue and to investigate the influences on meat quality, fatty acid profile, flavor and growth performance. Results: The results showed lambs in CON group got significantly higher live weight, hot carcass weight, and dressing percentage. The CON group had significantly higher value of redness (a^*), lightness (L^*) and water holding capacity (p<0.05), significantly lower value of Warner-Bratzler shear force than the PAS group (p<0.05). The subcutaneous fat from CON group lambs demonstrated a significantly higher content of C18:1 and C18:2 (p<0.05), but lower C14:0 and C16:0, indicating an increased degree of unsaturated fatty acid. The content of 4-methyloctanoic acid, 4-ethyloctanoic acid and 4-methylnonanoic acid had increased 2 to 4 times, representing a more intense odor in the CON group. However, the values were still lower than most sheep breeds reported, indicating the indoor feeding system could not fundamentally deteriorate the excellent meat characteristic of HBS. Conclusion: It was evident that lambs in CON group exhibited a better meat production performance, improved in meat color, texture and healthier fatty acid profile through pasture-weaned concentrate included intensive fattening system, which offers a good alternative regimen for lamb finishing and has a wide prospection in the HBS meat industry.

• Animal Bioscience
• /
• v.35 no.8
• /
• pp.1258-1269
• /
• 2022

Objective: For improving meat quality especially tenderness, male cattle are usually castrated to removes both the testicles. This study was conducted to evaluate the effect castration method (half- and complete-castration) on meat yield and quality characteristics of Hanwoo male cattle. Methods: Thirty-two similar age (5.9 months) Hanwoo male calves were divided into: half-castration (HC) and complete-castration (CC) groups (n = 16 per group). At 7 months of age, all the animals were castrated in which the HC calves had only one testicle surgically removed while, the CC calves had both testicles surgically removed. The castrated animals were reared under identical conditions until 25 months of age. After slaughter, the carcasses were evaluated for carcass traits and meat yield of primal cuts. For examination of the castration effect on meat quality, L. lumborum and semimembranosus muscles were used. The meat samples were analyzed for chemical composition, color, pH, shear force and water holding capacity, fatty acids, metabolites and volatile aroma compounds. Results: The HC group showed higher meat yields of all primal cuts (p<0.05). As a result, the total meat yield was higher by approximately 44 kg in the HC group (303.32 kg, corresponding to 67.88%) compared to the CC group (259.30 kg, corresponding to 62.11%) (p<0.05). In terms of meat quality, the HC resulted in two times greater fat content in both muscles examined compared to intact males. More importantly, the shear force values did not differ between HC and CC groups for L. lumborum muscles (p>0.05). The meat from HC animals exhibited higher amount of free amino acids associated with sweetness (p<0.05). Furthermore, the castration method only exhibited a negligible effect on metabolites and volatile aroma compounds in the cooked meat. Conclusion: Half-castration emerged as an alternative practice to be used for increasing the yield and tenderness of male cattle meat.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.353-379
• /
• 2020

The 2032 South-North Joint Olympics is an agreement between the two Koreas. Through this, various efforts are needed to improve new inter-Korean relations and co-prosperity on the Korean Peninsula. The purpose of this study is to proceed with the 203 South-North Joint Olympics. This study was developed by literature reserch methods. The result of this study are as follows. First, Seoul-Pyongyang soccer exchange game will be promoted. Second, the International Peace Cup a relay race(Marathon) will be held. Third, Korea Peace Cup International Table Tennis Championships will be held. Fourth, I propose holding the Korea Sports Science Forum. Fifth, about 16-17 events are propose for North Korea to host the 2032 South-North Joint Olympics. Sixth, the decision to host the 2032 Summer Olympics is expected in 2022 or 2023. Seventh, it is necessary to promote the Inter-Korean Social Association cultural Exchange and Cooperation Committee or the Special Committee for the Promotion of the Inter-Korea Sports Exchange and Cooperation. Eighth, it is necessary to implement a five-year plan to promote Inter-Korea sports Exchange Cooperation or a five-year plan for Inter-Korea sports Exchange and Cooperation. Ninth, the North Korea player registration system will be promote to the South Korean K-1 League. Ten, suggest sports exchange and cooperation ahead of time. Eleventh, train experts on North Korean sports or exchange and cooperation. Finally, the South-North Korea sports exchange Agreement will be promoted. It also promotes the Inter-Korea sports Exchange and Cooperation Support Act.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.127-137
• /
• 2022

Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.