• 열처리공학회지
• /
• 제23권1호
• /
• pp.3-9
• /
• 2010

Titanium and its alloys were brazed in the range of $850-950^{\circ}C$ within 10 min. of brazing time using expensive infra red or other heating methods. However, brazing time needs to be extended to get temperature-uniformity for mass production by using continuous belt type furnace or high vacuum furnace with low heating rate. This study examined effects of holding temperature for 60 min, on microstructure and mechanical properties of titanium alloys. Mechanical properties of titanium alloys were drastically deteriorated with increasing holding temperature followed by grain growth. Maximum holding temperatures for CP (commercial pure) titanium and Ti-6Al-4V were confirmed as $800^{\circ}C$ and $850^{\circ}C$, respectively. Both titanium alloys were successfully brazed at $800^{\circ}C$ for 60 min. with the level of base metal strengths by using Zr based filler metal, $Zr_{54}Ti_{22}Ni_{16}Cu_8$.

• 소성∙가공
• /
• 제8권3호
• /
• pp.269-275
• /
• 1999

A variable blank holding force method is proposed to improve deep drawing characteristics of sheet materials. In this method, the blank holding force (BHF) is controlled throughout a drawing process so that the punch load does not exceed a critical value, which is slightly less than the conventional process with the conforming process with the variable BHF is more flexible than the conventional process with the constant BHF and it could be used for improving the product's quality and drawability. In this paper we suggest a method controlling the BHF as a function of punch travel during the forming process. The optimization BHF curves are determined theoretically and experimentally. It is concluded that for the case of optimum BHF control methods the drawn cup height and the drawing formability achieved by this method are increased than those for constant BHF method. Also, as comparing the wall thickness distribution of the cup drawn by the constant BHF and the optimum BHF control, the BHF control reduce the wall thickness variation of the drawn cup at the cup wall and make the cup thickness distribution more uniformly than the constant BHF.

• Animal Bioscience
• /
• 제34권8호
• /
• pp.1382-1391
• /
• 2021

Objective: The objective was to evaluate the impact of different forms of iron including myoglobin, hemin, and ferric chloride on the quality of chicken breast meat. Methods: Chicken breast muscles were subjected to 1, 2, 3 mg/mL of FeCl₃, myoglobin and hemin treatment respectively, and the production of reactive oxygen species (ROS) and malondialdehyde, meat color, tenderness, water holding capacity and morphology of meat was evaluated. Results: Hemin was found to produce more ROS and induce greater extent of lipid oxidation than myoglobin and ferric chloride. However, it showed that hemin could significantly increase the redness and decrease the lightness of the muscle. Hemin was also shown to be prominent in improving water holding capacity of meat, maintaining a relatively higher level of the immobilized water from low-field nuclear magnetic resonance measurements. Morphology observation by hematoxylin-eosin staining further confirmed the results that hemin preserved the integrity of the muscle. Conclusion: The results indicated that hemin may have economic benefit for the industry based on its advantage in improving water holding capacity and quality of meat.

• 한국식품조리과학회지
• /
• 제17권5호
• /
• pp.503-509
• /
• 2001

The effects of salting methods on textural properties of Kakdugi were evaluated during fermentation at 1$0^{\circ}C$ for up to 52 days. Kakdugi samples were prepared by 4 different salting methods at final salt concentration of 1.5%, which is appropriate for organoleptic quality. The salting methods for radish cubes(2 cm size) of Kakdugi were as follows; 1) Treatment S-1: spraying dry salt uniformly on to the radish cubes at 1.5%(w/w) and holding for 1 hr, 2) Treatment S-5: spraying dry salt uniformly on to the radish cubes at 1.2%(w/w) and holding for 5 hr, 3) Treatment B-1: brining radish cubes in a 8.5%(w/v) salt solution for 1 hr, 4) Treatment B-5: brining radish cubes in a 4.0%(w/v) salt solution for 5 hr. The contents of water soluble pectin, total soluble solid and PG activity were increased as the fermentation periods increased. A majority of total dietary fiber(TDF) consisted of soluble dietary fiber(SDF), and the amount of insoluble dietary fiber(IDF) was relatively small in Kakdugi during fermentation. Furthermore, an increase in SDF and a consequent decrease in IDF contents were observed with the fermentation time increased.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.493-501
• /
• 2012

A rotational force generator for molten metal is developed using a linear motor design technology. Also, the developed device is applied to reproduce aluminum scraps and easy to control the rotate, stop, and forward and reverse rotation of molten metal. In addition, the developed device improves the melting speed and reproduction rate about 250 (%) and 96-99 (%), respectively, compared to the conventional handmade methods. Because it generates almost no dusts, it can improve working environments in a factory. Also, it has no losses in energy because it directly melts scraps. The device generates small amounts of the loss in refractory materials and aluminum caused by its oxidation because the molten metal is continuously rotated in which the loss and oxidized aluminum are the problems in the conventional melting and holding furnaces. Thus, it is possible to extend the life of furnaces and to produce high quality aluminum products.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.271-281
• /
• 2011

Purpose: The aim of this study is to investigate the changes in hardness and microstructure of a dental multipurpose alloy after simulated complete firing with controlled cooling rate and holding time by characterizing the changes in hardness and microstructure after simulated firing with various cooling rates and holding times. Methods: Before hardness testing, the specimens were solution treated and then were rapidly quenched into ice brine. The specimens were completely fired in furnace. Hardness measurements were made using a Vickers microhardness tester. The specimens were examined at 15 kV using a field emission scanning electron microscope. Results: The maximum hardness value was obtained at stage 0 after simulated firing with various cooling rates (quick cooling, stage 0, stage 1, stage 2, stage 3). By the repetitive firing, the hardness of the tested alloy decreased gradually. By holding the specimen at $500^{\circ}C$ for 10-20min after simulated firing, the hardness increased apparently. However, to hold the alloy for long periods of time in the relatively high temperature after simulated firing resulted in the formation of thick oxidation layer. The oxide film formed on the surface of the alloy after simulated complete firing with controlled cooling rate, which was mainly composed of O and Zn. Conclusion: It is reasonable to hold the alloy at $500^{\circ}C$ for 10-20min after complete firing in other to improve the final hardness of the alloy.

• 한국식품영양과학회지
• /
• 제7권1호
• /
• pp.43-52
• /
• 1978

It is well known that water holding capacity plays an important role in processing such meat products as frankfurter-type sausage and fish meat paste products as kamaboko and fish sausage. Consumer qualities of meat products, such as appearance, flavor, as well as drip and shrinkage on cooking, depend greatly on the degree of water binding. In this paper, the water holding capacities of fish paste and salt added paste of white corvenia, Argyrosomus argentatus and file fish, Novodon modestus were measured by centrifuging and press method before and after cooking. And the effects of the addition of phosphates and starch to enhance water binding and stabilize gel formation were also discussed. In addition, the experimental conditions which are suitable to determine the water binding of fish meat paste product were suggested. The results were expressed in percent of water absorbed by the filter paper when pressed or released by pressor or centrifuge to the weight of sample. From the results. a proper condition to measure the water holding capacity of fish meat paste was that 3.0 g of sample which was previously added with 10 percent water was centrifuged at 13,400 G or 12,000 rpm for 15 minutes for the centriguging method and for press method, 0.3 g sample with 10 percent of water added was extracted by an oil pressor at $30\;kg/cm^2$ for 1 minute. Water holding capacity of fresh paste of white corvenia was relatively higher than that of file fish and the difference between species of fish was greater than the difference between measurments by two methods. Sodium chloride had a great effect on enhancing the water holding capacity of fish meat paste giving better effect when 3.0 percent of salt was added. Phosphates used except calcium phosphate revealed a certain enhancement in water binding, yielding best effect at 0.3 percent addition, and metaphosphate seemed to be more effective in order. The addition of corn starch, however, appeared to be not so effective for enhancement of water binding in fresh-salt-added fish meat paste but in cooked fish paste which might be attributed to absorption of water by starch grain and swelling during the heating and consequently enforced gel strength of cooked fish paste. And the water holding capacity of cooked fish paste was proportionally related to its gel strength.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제48권2호
• /
• pp.86-97
• /
• 2024

Alkaline- or salt-assisted extractions have been widely used to extract edible insect proteins, however, there is a need for extraction techniques that balance cost-efficient production as well as preserving the protein properties. Mealworm proteins (Tenebrio molitor larvae) were extracted using three different extraction methods-alkali (AMP), salt (SMP), and water (WMP)-and then physicochemical and techno-functional properties were examined. AMP had high yield, protein, and amino acid contents, whereas WMP had high moisture, ash, and fat contents. SDS-PAGE showed a wide range of molecular weights in WMP whereas mostly low molecular weights were observed in AMP and SMP. AMP had poor protein solubilities compared to SMP and WMP across all pHs. AMP had enhanced water-holding capacity and emulsion stability, whereas WMP had improved oil-holding capacity and foaming properties. WMP formed a gel with and without the transglutaminase. The physicochemical and techno-functional properties demonstrated that water-soluble mealworm protein was superior to alkali-and salt-soluble mealworm proteins. Considering the cost efficiency and minimal impact on the environment as well, a cold press juicer could be utilized for mass production of mealworm protein compared to the conventional methods of protein extraction using alkali and salt.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권6호
• /
• pp.914-918
• /
• 2018

Objective: The relationship between water-holding capacity (WHC) and intermuscular fat (IMF) was studied in Japanese commercial pork. Methods: Longissimus muscles of pigs (n = 62), obtained from two meat packing plants, were analyzed for IMF content, moisture content, drip loss, cooking loss, and pH. Pairwise relationships among these traits were determined using correlation analyses. Results: IMF content was significantly correlated with moisture content (r = -0.88; p<0.01) and pH (r = 0.32; p<0.05), but not with drip loss (r = -0.23; p = 0.07) or cooking loss (r = -0.10; p = 0.42). In contrast, drip loss was significantly (and negatively) correlated with pH (r = -0.57; p<0.01). Conclusion: IMF content was not significantly correlated with WHC in pork, and so ultimately, we consider pH to be one of the most important factors influencing WHC in pork meat.

• 한국식품과학회지
• /
• 제31권5호
• /
• pp.1196-1202
• /
• 1999

마이크로파를 이용한 두유의 HTST저온살균시 미생물의 사멸효과와 이화학적 성분 변화를 상법과 비교하고자 하였다. 이때 HTST($90^{\circ}C$, 21초)법으로 살균하되 열수만을 이용한 경우(MP0)와 마이크로파로 온도를 올린 후 열수에서 holding한 경우(MP1)와 마이크로파만을 활용한 경우(MP2)의 세가지 경우로 구분하여 살균전후 변화를 비교해 보았다. 총균수의 경우 세가지 HTST살균법 모두 살균후 초기수의 4 log정도 감소하는 살균효과를 보여주었고 살균효과는 MP0>MP1>MP2의 순서를 보였다. 대장균과 저온성세균 및 phosphatase activity의 경우 세가지 HTST살균법 모두 살균후 우유의 배양실험에서 집락이 확인되지 않거나 살균후 음성(negative)인 것으로 나타났다. 세가지 살균방법 모두 80%이상의 trypsin 잔존율을 보여 trypsin inhibitor가 효과적으로 불활성화되었음을 알 수 있었으며 불활성화 효과는 MP0>MP1>MP2의 순서를 보였다. 두유의 pH와 적정산도, 점도 및 비타민 $B_2$의 경우 살균전후 큰 차이가 관찰되지 않았으며 살균방법별로도 차이가 없었다. 이로부터 마이크로파로 승온시킨 후 holding하는 병용법(MP1)이나 마이크로파 단독처리(MP2)를 활용할 경우 통상적 HTST방법(MP0)보다 우수하거나 대등한 살균효과 및 이화학적 품질보존효과가 있을 것으로 생각되었다. 이러한 연구결과는 다른 액상식품의 살균연구에도 확대 적용할 수 있으리라 기대된다.