• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.199-202
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean observation and meteorological observation. Conventional thermal control design, using MLI (Multi Layer Insulation), OSR (Optical Solar Reflector), heater and heat pipe, is utilized. Ka-band components are installed on South wall, while other equipment for sensors are installed on the opposite side, North wall. High dissipating communication units are located on external (surface) heat pipe and are covered by internal insulation blankets to decouple them from the rest of the satellite. External satellite walls are covered by MLI or OSR for insulation from space and for rejection internal heat to space. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. Single solar array wing is adopted in order to secure clear field of view of radiant cooler of IR meteorological sensor. This paper presents principles of thermal control design for the COMS.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.30-35
• /
• 1986

To elucidate chemical structure of the wood extracitives, softwood Larix leplolepis Gorden) metal was extracted with 95% ethanol at room temperature for 72 hours. The extract was fractionated with organic solvents such as n-hexane, chloroform. ether, and ethylacetate. From the n-hexane soluble fraction of the extratives, flavonoid and sterol compounds were isolated and identified as taxifolin(5,7,3',4'-tetrahydroxyflavanonol)(I) and ${\beta}$-sitosterol(II) by UV, IR, $^1$H-NMR spectroscopy and Mass spectrometry.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.235-239
• /
• 2012

This paper presents frequency response compensation technique, and a self-oscillation circuit for capacitive microresonator with the compensation technique using programmable capacitor array, to compensate for the frequency response distorted by parasitic capacitances, and to obtain stable oscillation condition. The parasitic capacitances between the actuation input port and capacitive output port distort the frequency response of the microresonator. The distorted non-ideal frequency response can be compensated using two programmable capacitor arrays, which are connected between anti-phased actuation input port and capacitive output port. The simulation model includes the whole microresonator system, which consists of mechanical structure, transimpedance amplifier with automatic gain control, actuation driver and compensation circuit. The compensation operation and oscillation output of the system is verified with the simulation results.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.990-1000
• /
• 2015

This paper presents an overlapping pattern substitution (PS) method. The original overlapping PS method as a reversible data hiding scheme works well with only four pattern pairs among fifteen possible such pairs. This paper generalizes the original PS method so that it will work well with an optimal pair from among the fifteen possible pattern pairs. To implement such an overlapping PS method, changeable and embeddable patterns are first defined. A class map is virtually constructed to identify the changeable and embeddable pairs. The run-lengths between consecutive least probable patterns are recorded. Experiments show that an implementation of our overlapping PS method works well with any possible type of pairs. Comparison results show that the proposed method achieves more embedding capacity, a higher PSNR value, and less human visual distortion for a given embedding payload.

• Journal of Hydrospace Technology
• /
• v.2 no.2
• /
• pp.1-13
• /
• 1996

This paper presents the result of a computational study on the wake characteristics of two tanker models, i.e. HSVA and Mystery hull forms. The focus of the study is on the distributions of axial, radial and tangential velocities of the two hull forms in way of the propeller, especially over the propeller disk. The effect of bilge vortices on the velocity distribution is also concerned. For the computation of stern and wake flows of the two hull farms, the incompressible Reynolds-Averaged Wavier-Stokes(RANS) equations are numerically solved by the second order finite difference method, which employs a four stage Runge-Kutta scheme with a residual averaging technique and the Baldwin-Lomax model. The calculated pressure distributions on the hull surface and the axial, radial and tangential velocity distributions over the propeller disk are presented for the two hull forms. Finally, the result of wake analysis for the computed wake distribution over the propeller disk is given in comparison with those for the experimental wake distribution fur the both hull forms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.129-130
• /
• 2005

The electrical stress has a major effect on the long-term reliability of the thyristor. Therefore, it is needed to analyze the relationship between reliability and stress. In this paper, we investigate the device failure mechanism which induced by the stress. And also investigate the effect of the thermal stress on the device failure and relationship between electrical and thermal stress. Two-dimensional process simulator ATHENA and device simulator ATLAS are used to analyze the failure mechanism of the device.

• The Plant Pathology Journal
• /
• v.15 no.5
• /
• pp.308-310
• /
• 1999

A fungus associated with gray blight on tea plant (Camellia sinensis) was identifed as Pestalotiopsis theae based on the mycological characteristics. Mycelial growth on potato dextrose agar and size and shape of conidia of P. theae were similar to those of P. longiseta, but P. theae was different from P. longiseta in the color of three median cells and the number of apical appendages. Artificial inoculation of conidial suspension or mycelial mats on the wounded leaves and shoots of healthy plants induced the same disease, respectively. The Korean native variety was relatively. The Korean native variety was relatively more resistat to P. theae than a Japanese variety‘Yabukita’which has bee recently introduced and planted in large areas of southern parts of Korea. Here, we report the report the first record of gary blight caused by P. theae on tea plant in Korea.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.4 s.235
• /
• pp.526-536
• /
• 2005

A heat dissipation modeling method of EEE parts, or semi-empirical heat dissipation method, is developed for thermal design and analysis an electronic equipment of geostationary satellite. The power consumption measurement value of each functional breadboard is used for the heat dissipation modeling method. For the purpose of conduction heat transfer modeling of EEE parts, surface heat model using very thin ignorable thermal plates is developed instead of conventional lumped capacity nodes. The thermal plates are projected to the printed circuit board and can be modeled and modified easily by numerically preprocessing programs according to design changes. These modeling methods are applied to the thermal design and analysis of CTU (Command and Telemetry Unit) and verified by thermal cycling and vacuum tests.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.1
• /
• pp.85-90
• /
• 2018

The new information service has been demanded due to the recent mobile internet activation, and the government is promoting the activation of the private use of the public data by putting up the Government 3.0. According to government policy, many public sectors provide public data, but the railway sector is inferior to other public sector. In the case of national railway corporation, urban railway is now operated by 14 corporations such as Seoul Metro through the nation and high-speed railway is now operated by Korea Railroad Corporation and Supreme Railways. It is very difficult to standardize and integrate data due to mutual interests of national railway corporation. This paper describes a way to standardize and integrate rail passengers information collected through research project.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.16-19
• /
• 2017

For the economical and environmental-friendly fabrication of polisher, Mo mask layer were sputtered on glass substrate instead of Cr mask material. Mo mask layers were sputtered by pulsed-DC sputtering and Photoresist patterns were formed on Mo mask layer for different develop times and optimized. After Mo mask layer were patterned and exposed glass was wet etched by HF solution for different etching times, the remaining Mo mask was stripped by using Al etchant. Develop time of 30 sec and HF wet etching time of 3 min were selected as optimized process condition and applied to the fabrication of polisher.