• Journal of Animal Science and Technology
• /
• 제55권4호
• /
• pp.289-293
• /
• 2013

The objective of this study was to assess the effects of dietary carbohydrases on growth performance, nutrient digestibility and blood characteristics in finishing pigs. A total of 90 pigs [(Landrace ${\times}$ Yorkshire) ${\times}$ Duroc] (initial BW = $56.15{\pm}1.26kg$) were used for a 35 d feeding trial. The dietary treatments included: 1) CON (control diet), 2) MIX (CON + mixture with ${\alpha}$-galactosidase and ${\beta}$-mannanase 0.05%) and 3) MAN (CON + ${\beta}$-mannanase 0.05%). There were six replications per treatment with five pigs per pen. The average daily gain (ADG) in MIX was higher than in CON (p<0.05). No significant differences were noted in the average daily feed intake (ADFI) and feed efficiency (G:F) among dietary treatments (p>0.05). Apparent total tract digestibility (ATTD) of dry matter (DM) and energy (E) in MIX increased (p<0.05) relative to CON and MAN. The ATTD of nitrogen (N) in MIX was higher (p<0.05) than in CON. No differences in red blood cells (RBC), white blood cells (WBC), lymphocytes and IgG concentrations were observed among dietary treatments (p>0.05). In conclusion, the addition of the mixture of carbohydrases (${\alpha}$-galactosidase and ${\beta}$-mannanase 0.05%) increased ADG and nutrient digestibility in finishing pigs.

• 한국주조공학회지
• /
• 제29권4호
• /
• pp.176-180
• /
• 2009

Effect of matrix microstructure on creep behaviors of squeeze cast magnesium matrix composites was investigated. Aluminum borate whisker was used as reinforcement and AZ31, AS52 and Sr added AS52 Mg alloys were used for matrix alloys. The reinforcement was distributed homogeneously and defect-free composite was manufactured. Creep tests were carried out at the temperature of $150^{\circ}C$ under the applied stress of 50 and 100 MPa for Mg alloys and Mg MMCs, respectively. The creep resistance of Mg MMCs was in this order: AS52-Sr > AS52 AZ31 MMCs. Void initiation during creep mainly occurred at $Mg/Mg_{17}Al_{12}$ interface and propagation went along grain boundaries. On the other hand, $Mg_2Si$ phase was not attributed to the creep void initiation.

• Journal of Chest Surgery
• /
• 제35권7호
• /
• pp.548-552
• /
• 2002

한국형 인공심장(AnyHeart)은 single moving actuator mechanism을 이용한 일체형 및 이식형 양심실 박동펌프이다. 저자 등은 양심 부전증에 의한 말기 심장병 환자에서 구난의료 차원으로 시도된 한국형 인공심장 (AnyHeart) 이식 1례를 경험하였기에 그 결과를 보고한다.

• Mass Spectrometry Letters
• /
• 제9권4호
• /
• pp.95-99
• /
• 2018

An innovative, simple, and rapid assay method based on liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) was developed and validated for the simultaneous determination of eight statin drugs in human urine. A simple sample clean-up procedure using the "dilute and shoot" (DAS) approach enabled a fast and reliable analysis. The influence of the dilution factor was investigated to ensure detectability and reduce the matrix effect. Chromatographic separation was performed on a Phenomenex Kinetex C18 column ($50{\times}3.0mm$ i.d., $2.6{\mu}m$) using an elution gradient of mobile phase A composed of 0.1% acetic acid, and mobile phase B composed of acetonitrile, at a flow rate of 0.35 mL/min. Quantitation was performed on a triple quadrupole mass spectrometer operated in multiple reaction monitoring (MRM) mode using electrospray ionization in positive ion mode. The total chromatographic run time was 15 min. The method was validated for selectivity, sensitivity, recovery, linearity, accuracy, precision, and stability. The present method was successfully applied to the analysis of Rosuvastatin in urine samples after oral administration to healthy human subjects.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.860-870
• /
• 2010

Long term monthly monitoring data showed that the water quality of streams flowing into Lake Paldang has been improved by various strategy for water. However, the effect of quality on Lake Paldang is still insufficient because of nonpoint source from watershed. In order to evaluate quantifying methods for pollution source and make a suggestion on improvements, Storm Water Management Model (SWMM) was constructed by using data set from the water quality and streamflow monitoring network in the Kyoungan watershed for Total Maximum Daily Loads (TMDLs). Load duration curve (LDC) based on the result of the Kyoungan watershed SWMM indicated that the water quality criterion on $BOD_5$ was often exceeded in up-stream than down-stream. From flowrate-load correlation curve, SS load significantly increased as streamflow increases. 75.3% of streamflow and 62.1% of $BOD_5$ loads is discharged especially in the zone of high flows, but monitoring data set didn't provide proper information about the conditions and the patterns associated with storm events. Therefore, it is necessary to acquire representative data set for comparing hydrograph and pollutograph through monitoring experimental watershed and to establish methods for quantifying point and nonpoint source pollutant loads.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.81-90
• /
• 2020

기존 비보강 조적벽체의 내진 성능과 에너지 효율을 동시에 보강하기 위한 TCP 보강 공법을 개발하였다. TCP는 경량 모르타르 내 격자형 탄소섬유 시트와 모세관 튜브를 매립하여 일체로 타설한 패널로 조적벽체에 부착하여 탄소섬유 시트에 의한 내진보강과 모세관 튜브에 온수를 공급함으로써난방 또는 단열 등의 에너지 보강을 동시에 달성할수 있는 보강 공법이다. 본 연구에서는 TCP의 내진 보강 효과를 파악하기 위하여 TCP 보강 유무에 따른 조적 벽체를 대상으로 정적가력실험을 실시하였다. 실험 결과, TCP 보강에 의해 최대 강도 및 변위가 약 1.4배증가하였으며, 초기 강성과 에너지 흡수능력에 효과가 있음을 보였다. 또한, 손상에 따른 조적 벽체의 변형이 제어됨에 따라 취성 파괴를 예방할수 있을 것으로 판단된다.

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.48-53
• /
• 2013

Due to the urbanization, lots of people are living in cities. It is very convenient to live in the cities for the people but at the same time, the highly populated city has several environmental problems. During delivery process of large amount of municipal waste generated from the cities, the automobile emission and traffic jam have been occurred. The waste collection in the cities has been mainly done by using labour force and delivery truck. This is the conventional waste collection up to now. Recently, new technologies like automated waste collection system and capsule transportation have been introduced. Conventional waste collection mainly relied on the labour force and truck delivery does not need to invest a lot of money for the start-up. However, it requires to pay the operational cost both for the labour force and the truck delivery. On the contrary to this conventional waste collection, the automated waste collection and capsule transportation require high initial investment cost. However, the automated waste collection and capsule transportation can reduce significantly the pollutants emission, traffic jam by the waste trucks and actual waste collection cost per ton. In dealing with the waste collection in the cities, new waste collection technologies could be properly combined with the conventional waste collection for the effective municipal waste treatment.

• 농업과학연구
• /
• 제38권4호
• /
• pp.613-618
• /
• 2011

To develop clubroot resistant Chinese cabbage inbreds, IT 033820, a clubroot resistant turnip, was cross pollinated with a Chinese cabbage inbred of BP 079. From 2005, conventional breeding and microspore culture method performed using these F1 plants as parental materials. In 2007, conventional breeding method resulted in 21 F3 inbreds. After inoculation of clubroot race 4, one inbred showing 83% resistant was selected and registered as 'onkyo 20036ho' in 2008. From 2005, we scanned hybrid cultivars using micro spore culture and developed many doubled haploid (DH) lines in Chinese cabbage. Using Chinese cultivar of 'oong-baek 2ho' we developed 26 DH inbreds in 2007. After inoculation of clubroot race 4, one DH inbred showing 77% resistant and yellow inner leaf color was selected and registered as 'onkyo 20034'in 2008. We found conventional breeding method was effective using introduced germplasm showing low germination. However, when using hybrid cultivar as starting material, microspore culture method was powerful for developing various inbred in short time.

• Industrial Engineering and Management Systems
• /
• 제15권1호
• /
• pp.11-18
• /
• 2016

This paper considers a scheduling problem in a flexible job shop with a reconfigurable manufacturing cell. The flexible job shop has both operation and routing flexibilities, which can be represented in the form of a multiple process plan, i.e. each part can be processed through alternative operations, each of which can be processed on alternative machines. The scheduling problem has three decision variables: (a) selecting operation/machine pairs for each part; (b) sequencing of parts to be fed into the reconfigurable manufacturing cell; and (c) sequencing of the parts assigned to each machine. Due to the reconfigurable manufacturing cell's ability of adjusting the capacity, functionality and flexibility to the desired levels, the priority scheduling approach is proposed in which the three decisions are made at the same time by combining operation/machine selection rules, input sequencing rules and part sequencing rules. To show the performances of various rule combinations, simulation experiments were done on various instances generated randomly using the experiences of the manufacturing experts, and the results are reported for the objectives of minimizing makespan, mean flow time and mean tardiness, respectively.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.371-380
• /
• 2006

수신안테나 다양성을 쓰는 직접수열 부호분할 다중접속 시스템에서 의사잡음 부호를 획득할 때 평균값, 큰값, 그리고 작은값 일정 오경보 확률 처리기의 성능 특성을 균질 잡음 환경에서 얻고 견주어 본다. 균질 잡음 환경에서는 평균값 일정 오경보 확률 방법이 성능이 가장 좋고 큰값 일정 오경보 확률 방법은 평균값 일정 오경보 확률 방법과 성능이 거의 같다는 것을 모의실험으로 보인다. 이 논문의 2부에서는 비균질 잡음 환경에서 부호획득에 알맞게 평균값, 큰값, 그리고 작은값 일정 오경보 확률 처리기를 다룬다.