• Journal of Ecology and Environment
• /
• v.29 no.4
• /
• pp.389-398
• /
• 2006

To examine sediment characteristics and find anthropogenic effects on riverine wetland ecosystems, paleoecological study was carried out at Bam islands in Seoul. Three hundred cm deep sediment cores were retrieved and dated with the lamination analysis method until 36 cm depth (1986). Sediments were divided into three zones based on the depth profiles of physico-chemical variables: below 160 cm depth (before 1968), between 160 and 40cm depths and above 40cm depth (after 1986). Physico-chemical characteristics were very variable between 160 and 40cm depths and this indicates unstable sedimentation environment. Even though heavy metal concentrations were relatively low, Cd and As contents have increased continuously. Dry mass accumulation rates during $1968{\sim}1986\;and\;1987{\sim}2003$ were 140 and $21\;kg\;m^{-2}\;yr^{-1}$, respectively. This was related to flooding intensity and duration. Bulk density, water content, loss on ignition, N, C, C/N ratio were very similar to other river delta but Ca, Na and K contents were 2 to 4 times higher than others. Heavy metal contents except Pb were lower or similar to those in other studied marshes in Korea. Heavy metal and Mg contents were correlated with each other and this suggests that the source of heavy metals be parent rock. From $^{13}C$ dating dates of organic materials in sediment, it is suggested that organic matter originated from the watershed and flooding intensity in the watershed might be responsible for the source of sediments. This study provides reference data for the comparison of sediment characteristics at islands in river and for the management of Bam islands.

• Journal of Korean Medical classics
• /
• v.21 no.1
• /
• pp.93-110
• /
• 2008

We got some conclusion about the function of five tastes from individual peculiarity, from "Sanghanjapbyeongnon(傷寒雜病論)" by Sungmoogi, like below. 1. Five tastes[五味] have their general function, but herbs of one tastes, each has special function, we can define it as individual peculiarity 2. For example, sour taste generally make it convergent, astringent. The sourness of Paeoniae Radix Alba[芍藥] can convergent resin, and be help nutrition, but same of Phaseoli Semen[赤小豆] can make him vomit. 3. Bitterness generally make it down, dry, and solid. Scutellariae Radix[黃芩], Coptidis Rhizoma[黃連] can bring down fever of heart and spleen, but Rhei Radix Et Rhizoma[大黃] eliminates solid illness. 4. Sweetness make it strong, harmonic, relax. Sweetness of Glycyrrhizae Radix[甘草] flows into spleen, make it relax the part of beneath heart. Puerariae Radix[葛根] can make scatter the cold on skin. 5. General nature of hot taste is diffusion, sheen, rampancy. Cinnam omi Ramulus[桂技] eliminates the Pung(風) in Wigi(衛氣). same Zingiberis Rhi zoma[乾薑] make inner cold scattered, and warm stomach. 6. Salty make Gi(氣) down, and slacken solidity, salty Natrii Sulfas[芒硝]removes heat of body. But Alismatis Rhizoma[澤瀉] removes needless water. 7. To know peculiarity of each herb, not only one taste but other combined tastes, and areas medical, agricultural, biologic, etc.

• Publications of The Korean Astronomical Society
• /
• v.35 no.3
• /
• pp.43-57
• /
• 2020

Hong, Dae-Yong manufactured the Tongcheon-ui (Pan-celestial Armillary Sphere) with cooperating clock researcher Na, Kyeong-Jeok, and its craftsman An, Cheo-In, in Naju of Jeolla Province in 1760 ~ 1762. Tongcheon-ui is a kind of astronomical clock with an armillary sphere which is rotated by the force generated by a lantern clock's weight. In our study, we examine the lantern clock model of Tongcheon-ui through its description of the articles written by Hong himself. As his description, however, did not explain the detail of the mechanical process of the lantern clock, we investigate the remains of lantern clocks in the possession of Korea University Museum and Seoul National University Museum. Comparing with the clocks of these museums, we designed the lantern clock model of Tongcheon-ui which measures 115 mm (L) × 115 mm (W) × 307 mm (H). This model has used the structure of the striking train imitated from the Korea University Museum artifact and is also regulated by a foliot escapement which is connected to a going train for timekeeping. The orientation of the rotation of the going train and the striking train of our model makes a difference with the remains of both university museums. That is, on the rotation axis of the first gear set of Tongcheon-ui's lantern clock, the going and the striking trains take on a counterclockwise and clockwise direction, respectively. The weight of 6.4 kg makes a force driving these two trains to stick to the pulley on the twine pulling across two spike gears corresponding to the going train and the striking train. This weight below the pulley may travel down about 560 mm per day. We conclude that the mechanical system of Tongcheon-ui's lantern clock is slightly different from the Japanese style.

• Korean journal of applied entomology
• /
• v.33 no.2
• /
• pp.56-59
• /
• 1994

Life histoy of Nysius plebejrrs, the most injurious pest in chysanthemun cultivation in Korea, was studies both in field and inseday in Chinju during 1991 and 1992 seasons, and resulis are summarized as below 7hls insect has 3 generation per year, adult peaks on the mid April, mid June and late August, and the highest number of adults were attracted to the light tmp from the late August through mid September. Overwntered generation and needed 6-7weeks from egg rnatulity m spring, and 5-6 weeks, for both the first and second generation m summer, Incubation egg periods were 142, 9.3 and 7.2 days, nymphal penods were 45.2, 32.1 and 31.2 days, and total growth periods, were 59.4. 41 4 and 38.4 days, respect~vely for the overwintered, flst and second generation. Ovipositional penods were 25.6, 23.4 and 21.2 days. and number of eggs Iald by each female were 41.5. 37.2 and 35.4 days, respedively of each generation Longevities of female were 326, 27.5 and 25.1 days. and of male were 15 2, 12.3 and 12.1 days. respectively of each generation. Sex ratlo was about 1:1 in all generation, and eggs were laid in mass on the surface of leaves or stems of the host plants. This insed over-wmters as adult (90%) or 5th instar nymph (10%), however, over-wintering adults seem to be sexually premature, and mating take place actively in the following spring.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.39.3-40
• /
• 2015

The NISS (Near-infrared Imaging Spectrometer for Star formation history) onboard NEXTSat-1 is the near-infrared instrument optimized to the first small satellite of NEXTSat series. The capability of both imaging and low spectral resolution spectroscopy in the near-infrared range is a unique function of the NISS. The major scientific mission is to study the cosmic star formation history in local and distant universe. For those purposes, the main targets are nearby galaxies, galaxy clusters, star-forming regions and low background regions. The off-axis optical design of the NISS with two linear variable filters is optimized to have a wide field of view ($2deg.{\times}2deg.$) as well as the wide wavelength range from 0.95 to $3.8{\mu}m$. The mechanical structure is considered to endure the launching condition as well as the space environment. The dewar inside the telescope is designed to operate the infrared detector at 80K stage. From the thermal analysis, we confirmed that the telescope and the dewar can be cooled down to around 200K and 80K, respectively in order to reduce the large amount of thermal noise. The stray light analysis is shown that a light outside a field of view can be reduced below 1%. After the fabrications of the parts of engineering qualification model (EQM), the NSS EQM was successfully assembled and integrated into the satellite. To verify operations of the satellite in space, the space environment tests such as the vibration, shock and thermal-vacuum test were performed. Here, we report the results of the critical design review for the NISS.

• Journal of architectural history
• /
• v.20 no.2
• /
• pp.7-22
• /
• 2011

This study primarily aims to illuminate the characteristics of $Meoreum$ in Korean traditional fitting system according to the respective types and its periodical changes. Using the research findings as a chronological indicator by which to estimate the construction date of the building is the secondary purpose. In this study 42 of $Byeoldang$ and pavilion architecture remaining in $Yeongnam$ district were examined through the field surveys and methods of documentary research. The research results are as follows. First, $Meoreum$, which is located below the windows or doors, provides protection against the outer wind and has the function to prevent some warm air of the room from flowing outside. Second, $Meoreum$ was recorded as $Yoeum$(了音), $Woneum$(遠音), and $Maleum$(末音) in $Yeong-geon-ui-gwe$(營建儀軌) of Joseon period. While $Yoeum$(了音) was used in $Yeong-geon-ui-gwe$(營建儀軌) of 1776 and 1856, $Woneum$(遠音) had been also used continuously since the year of 1800. The word, $Maleum$(末音) can be seen in $Lim-won-gyeong-je-ji$(林園經濟志), published in 1827. $Woneum$(遠音) and $Maleum$(末音) seem to be the $Yi-du$(吏讀) types of expression of $Meoreum$ which is being extensively used now. Third, the kinds of $Meoreum$ can be classified as $TohMeoreum$, $TongMeoreum$, $TongpanMeoreum$, and $JjaneunMeoreum$. $TongMeoreum$ and $TohMeoreum$ were mostly used at the front part of $Ondol-rooms$, the backside of main floor called $Daechung$(大廳), and at the space between $Daechung$ and rooms in the Pavilions and $Byeoldangs$(Annexes) that had been built in the early Joseon dynasty. $TohMeoreum$ was usually used at the bottom parts of windows between $Daechung$ and $Ondol-rooms$. $TongpanMeoreum$ was mainly used in the mid-Joseon period and relatively high height was the distinctive feature of $Meoreum$ at that time. $Jjaneun$ $Meoreum$, used mainly in the late Joseon dynasty, has become lower and lower gradually in height since 19th century, so people could enter the room through the windows(fittings). Such changes in $Meoreums$ types has brought about the flow of human traffic directly from $Toenmaru$, narrow wooden porch running along the outside of a room to $Ondol-rooms$.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.523-534
• /
• 2012

The objective of this study was to experimentally investigate the effect of heat curing methods on the temperature history and strength development of slab concrete exposed to $-10^{\circ}C$. The goal was to determine proper heat curing methods for the protection of nuclear power plant structures against early-age frost damage under adverse (cold) conditions. Two types of methods were studied: heat insulation alone and in combination with a heating cable. For heat curing with heat insulation alone, either sawdust or a double layer bubble sheet (2-BS) was applied. For curing with a combination of heat insulation and a heating cable, an embedded heating cable was used with either a sawdust cover, a 2-BS cover, or a quadruple layer bubble sheet (4-BS) cover. Seven different slab specimens with dimensions of $1200{\times}600{\times}200$ mm and a design strength of 27 MPa were fabricated and cured at $-10^{\circ}C$ for 7 d. The application of sawdust and 2-BS allowed the concrete temperature to fall below $0^{\circ}C$ within 40 h after exposure to $-10^{\circ}C$, and then, the temperature dropped to $-10^{\circ}C$ and remained there for 7 d owing to insufficient thermal resistance. However, the combination of a heating cable plus sawdust or 2-BS maintained the concrete temperature around $5^{\circ}C$ for 7 d. Moreover, the combination of the heating cable and 4-BS maintained the concrete temperature around $10^{\circ}C$ for 7 d. This was due to the continuous heat supply from the heating cable and the prevention of heat loss by the 4-BS. For maturity development, which is an index of early-age frost damage, the application of heat insulation materials alone did not allow the concrete to meet the minimum maturity required to protect against early-age frost damage after 7 d, owing to poor thermal resistance. However, the combination of the heating cable and the heat insulating materials allowed the concrete to attain the minimum maturity level after just 3 d. In the case of strength development, the heat insulation materials alone were insufficient to achieve the minimum 7-d strength required to prevent early-age frost damage. However, the combination of a heating cable and heat insulating materials met both the minimum 7-d strength and the 28-d design strength owing to the heat supply and thermal resistance. Therefore, it is believed that by combining a heating cable and 4-BS, concrete exposed to $-10^{\circ}C$ can be effectively protected from early-age frost damage and can attain the required 28-d compressive strength.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.67-76
• /
• 2016

Concrete exposed to severely low temperature below $-20^{\circ}C$ should be provided with proper heat supplying curing to protect the concrete from early frost damage at the time of pouring.meanwhile, so far, effective heat curingmethods of the concrete under severely low temperature are not well established in Korea. For this reason, the objective of this paper is to provide effective heat curingmethod of concrete exposed to severely low temperature to protect early frost damage by varying the combination of heat curingmaterial combinations. Temperature history,maturity development and core strength results are investigated. Fourmock-up specimens simulating slab, wall and column were prepared and heat insulation, heat supplying and both were applied. Test results indicate that the combination of quadruple layer bubble sheet(4BS) and embedding of heating cable has desirable performance for a slab, and heat supplying curing inside heat enclosure and heat generationmat also shows desirable performance for a wall, and for a column, use of EPS heat insulation has proper performance against early frost damage, which reaches $45^{\circ}D{\cdot}D$ and helps the concretemaintain above $0^{\circ}C$ within 3 days. Themethodsmentioned above are believed to be optimum protection from early frost damage of the concrete under $-20^{\circ}C$.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.2
• /
• pp.147-158
• /
• 1996

Background : Endobronchial tuberculosis(ET) is known to affect frequently young female and serious complication like bronchial stenosis would occur if early diagnosis and treatment for ET is not performed immediately. But ET shows normal chest roentgenogram in about 10% of patients, and is often confused with bronchial asthma because ET presents clinical features like cough, dyspnea, wheezing in history and physical examination. The pulmonary function test(PFT) feature of ET is not well known, but when we consider the fact that ET is pathophysiologically different from bronchial asthma, if there is any feature of PFT in ET, and we know it, PFT will be very helpful for diagnosis and follow up of ET. Methods : We performed both PFT and bronchoscopy in 68 ET patients who visited Boramae hospital, and were confirmed as ET by bronchoscopic biopsy and were followed prospectively from November 1991 to March 1995. After history taking and physical examination, we performed chest roentgenogram, complete blood count, sputum AFB stain and culture, and also performed PFT before anti-tuberculosis chemotherapy. PFT was classified as restrictive, if only PVC was reduced below 80%, and obstructive, if only FEV1 was reduced below 75%. In the case of both FVC and FEV1 were reduced, PFT was classified as restrictive if FEY1/FVC was greater than 75%, and mixed if FEV1/FVC was reduced below 75%. We repeated the PFT and bronchoscopy for 68 ET patients who were proven by biopsy in the first month and sixth month after starting anti-tuberculosis chemotherapy, and studied the feature and change of PFT of the ET and the relation between PFT and the bronchoscopic finding, and obtained following results. Results: 1) Number of male patients was 12, and that of female patient was 56, and mean age was $35.4{\pm}17yr$.(17-74yr). Clinical symptom was in the order of cough(86.8%), dyspnea(63.2%), fever(17.6%) and hemoptysis (10.3%), and the wheezing and stridor were audible among the 40 patients(58.4%) in the physical examination. 2) Hemoglobin level was below 12g/dl among 25 patients (36.8%), and WBC level was above $10,000/mm^3$ among 9 patients(13.2%) and ESR was above 20 among 46 patients (67.6%) and AFB stain and culture were positive among 50 patients(73.5%). 3) The dominant roentgenographic finding of ET was fibronodular feature in 35 patients(51.5%), pneumonic feature in 14 patients (20.6%), collapse in 11 patients(16.2%), mass-like lesion in 3 patients(4.4%), cavitary lesion in 2 patients(2.9%), and normal in 3 patients(4.4%). 4) PFT feature at the time of diagnosis of ET was normal in 16 patients(23.5%), restrictive pattern in 32 patients (47%), obstructive in 4 patients(5.8%), and mixed in 14 patients(23.5%). So restrictive pattern was the dominate feature of ET. 5) The PFT feature was little correlated with the gross finding of bronchoscopy, but the change of PFT during treatment of ET showed relatively good correlation with the change of bronchoscopic finding. 6) FVC(2.30L vs. 2.61L) and FEV1(1.74L vs. 2.06L) increased significantly (p < 0.01), but FEV1/FVC(82% vs. 83%) and PEF(3.45L/sec vs. 3.95L/sec) did not change significantly after 1 month of treatment (p > 0.01), and there was no significant change among all parameters during first and sixth month of treatment(p > 0.01). Conclusion : PFT may be useful in the diagnosis and treatment follow up of ET but further study would be needed to confirm it.

• The Journal of Fisheries Business Administration
• /
• v.4 no.1_2
• /
• pp.19-57
• /
• 1973

Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ ＝18, 907.7455＋15435.9364 t (r=0.89) where the origin t＝0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r＝0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets ＜3, 947.1674+0.005 $L_{g}$ ＞) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.