• Journal of Korean Foot and Ankle Society
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2015

Total ankle replacement has been performed for treatment of end stage arthritis of the ankle, hopefully being an alternative to ankle arthrodesis. However, due to its high failure rates, earlier versions of ankle replacements were not regarded as successful procedures. The latest design has shown increasingly positive results. Total joint replacement of the ankle itself is still regarded as a demanding procedure and much more challenging than that of the hip and knee in many aspects. Several studies, however, have pointed out that it is becoming the viable, accepted alternative for arthrodesis with advanced implants, appropriate patient selection, and proper training experience of procedures. Compared with arthrodesis, it shows equal or better outcomes in pain relief, range of motion, and patient's satisfaction. We are attempting to review its biomechanical characteristics, implant design, indications, complications, clinical outcomes, and survival rate.

• Korea Journal of Hospital Management
• /
• v.14 no.1
• /
• pp.23-35
• /
• 2009

The objectives of the present study is to examine the validity of Charlson Comorbidity Index(CCI) based on medical record data; to utilize the index to determine outcome indexes such as mortality, length of stay and cost for the domestic patients whose have received total hip arthroplasty. Based on medical record date, 1-year Mortality was analyzed to be 0.664 of C statistic. The $R^2$ for the predictability for length of stay and the cost was about 0.0181, 0.1842. Fee of national health insurance and total cost including the cost not covered by insurance, also had statistically significance above 3 points of Charlson point score(p=0.0290, 0.0472; $p.{\le}0.05$). The 1-year mortality index, length of stay and cost of the total hip arthroplasty patients which was obtained utilizing CCI have a limitative prediction power and therefore should be carefully analyzed for use.

• Hip & pelvis
• /
• v.35 no.2
• /
• pp.122-132
• /
• 2023

Purpose: The dome technique is a technique used in performance of revision total hip arthroplasty (THA) involving intraoperative joining of two porous metal acetabular augments to fill a massive anterosuperior medial acetabular bone defect. While excellent outcomes were achieved using this surgical technique in a series of three cases, short-term results have not been reported. We hypothesized that excellent short-term clinical and patient reported outcomes could be achieved with use of the dome technique. Materials and Methods: A multicenter case series was conducted for evaluation of patients who underwent revision THA using the dome technique for management of Paprosky 3B anterosuperior medial acetabular bone loss from 2013-2019 with a minimum clinical follow-up period of two years. Twelve cases in 12 patients were identified. Baseline demographics, intraoperative variables, surgical outcomes, and patient reported outcomes were acquired. Results: The implant survivorship was 91% with component failure requiring re-revision in only one patient at a mean follow-up period of 36.2 months (range, 24-72 months). Three patients (25.0%) experienced complications, including re-revision for component failure, inter-prosthetic dual-mobility dissociation, and periprosthetic joint infection. Of seven patients who completed the HOOS, JR (hip disability and osteoarthritis outcome score, joint replacement) survey, five patients showed improvement. Conclusion: Excellent outcomes can be achieved using the dome technique for management of massive anterosuperior medial acetabular defects in revision THA with survivorship of 91% at a mean follow-up period of three years. Conduct of future studies will be required in order to evaluate mid- to long-term outcomes for this technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1491-1492
• /
• 2011

• Journal of the Korean Society of Physical Medicine
• /
• v.19 no.2
• /
• pp.17-28
• /
• 2024

PURPOSE: This study was conducted to investigate the effect of gluteal muscle strengthening exercises (GMSE) with ankle joint pumping exercises (AJPE) on thigh swelling, gait ability, and pain level in patients who underwent total hip arthroplasty. METHODS: A total of 38 patients who had undergone total hip replacement surgery >1 week prior participated in this study. Participants were randomly assigned to a group that performed only GMSE (CG; n = 19) and a group that performed GMSE and AJPE (EG; n = 19). The CG group performed GMSE for 30 min, and the EG group performed GMSE for 30 min followed by AJPE for 15 min. Exercises were performed five times a week, for a total of 20 times over 4 weeks in both groups. Thigh swelling (thigh size), 10 m walking test (10MWT) and timed up and go test (TUG) results, pain level (visual analogue scale, VAS) scores, Short Form 36 health survey (SF-36), and hip outcome scale (HOS) scores were evaluated before and after the intervention. RESULTS: After 4 weeks of intervention, significant differences were observed in the thigh size, 10MWT, TUG, VAS, SF-36, HOS before and after intervention in both groups (p < . 05). However, only thigh size showed a significant interaction between group and measurement time (p < . 05). CONCLUSION: GMSE combined with AJPE might be effective in improving the gait ability and pain level in patients with total hip arthroplasty, and GMSE may be more effective in improving thigh swelling and gait ability than GMSE without AJPE.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.107-114
• /
• 2018

Long-term complications such as loosening, wear, osteolytic lesion and granulomatous reaction by foreign bodies can occur, after total hip arthroplasty. The implantation alignment effects dislocation and wear, according to its amount and direction. Wear particles in total hip arthroplasty brings about biochemical complications such as osteolysis or send wear. In this sense, it is important to regularly check wear and alignment of total hip replacement. Because the wear in followup of 10 years may remain in a small amount, like a 1 or 2 mm generally, somewhat precise measurement tool has to be established. The wear and alignment measurement softwares commercially available currently lack in project saving or reproducibility. This study suggests a reliable method for the measurement using an X-ray image and a CAD software. The proposed method can be executed only if having a CAD software under most of current general clinical radiographical environment. The proposed was revealed through tests for the method to have accuracy of 0.06 mm with precision of 0.05 mm for wear measurement, and precision of 0.27 degrees for tilt measurement.

• Korean Journal of Clinical Pharmacy
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2014

Objective: Currently, rivaroxaban is widely used clinically for thromboprophylaxis after surgery. However, there are concerns on effectiveness and safety of rivaroxaban for its proper use. We aimed to evaluate the effectiveness and safety of rivaroxaban in orthopaedic patients after total hip replacement surgery in a large medical centre after the preferred formulary was switched from enoxaparin to rivaroxaban. Methods: The study was conducted on the patients who underwent hip arthroplasty surgery at the department of Orthopaedic Surgery at Seoul St. Mary's Hospital, South Korea. Electronic medical records were retrospectively reviewed to identify patients treated with rivaroxaban following total hip replacement between February 2011 and March 2012. Evaluation criteria included indications for use, dose, initiation and duration of therapy, drug interactions, adverse reactions, and status of health care reimbursement. The patients who were on enoxaparin were also reviewed as a reference. Results: We identified 57 patients who received rivaroxaban and 50 who received enoxaparin. All patients were prescribed the drugs for Korean Food and Drug Administration-approved indications. No thromboembolic or bleeding events were observed in either group. However, only 5.3% of rivaroxaban- treated patients had an appropriate length of prophylaxis and only 3.5% began rivaroxaban treatment at the recommended time. Surprisingly, 47.4% of rivaroxaban-treated patients received rivaroxaban despite being ineligible for reimbursement benefits. Conclusion: Rivaroxaban was generally well tolerated clinically. However, the duration of treatment, the time of initiation and patient eligibility for reimbursement require improvements, emphasising the need for education which indicates the area of pharmacists' involvement.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.951-955
• /
• 2001

The experimental comparison between bonded and unbonded types stem-cement interface was carried out on axisymmetric stem-cement-aluminum model of the femoral component of a total hip replacement. Human femur was modeled in non-tapered and tapered($7.5^{\circ}$) aluminum hollow cylinders to emulate the diaphyseal and metaphyseal segments of the femur. For unbonded type, we tested stems with three different taper angles($5^{\circ},\;7.5^{\circ},\;10^{\circ}$). In every case, the cement-aluminum interface was designed to endure 8MPa shear strength. (a measured value at cement-bone interface) We tested aluminum models under axial loading for both cases. As an experimental result, it was found that unbonded stem sustained more axial load as bonded stem in both cases, diaphyseal and metaphyseal models. The unbonded types failed in cement mantle under axial compressive load, while the bonded ones failed in shear at cement-aluminum interface. These results suggest that a polished stem will sustain much higher axial load than a roughened stem. And a polished stem will make more stable cement-bone interface that may promote better osteosythesis around the stem.

• Journal of muscle and joint health
• /
• v.25 no.2
• /
• pp.122-134
• /
• 2018

Purpose: The purpose of this study was to develop a 12-week structured exercise program (12-week-SEP) and evaluate its effects on pain, physical function and quality of life in patients with total hip arthroplasty (THA). Methods: A nonequivalent control group non-synchronized design was utilized to examine the effects of the 12-week-SEP on patients' outcomes after THA. A total of 46 adult patients (experimental group=25, control group=21) who had THA were recruited for the study. The 12-week-SEP consisted of education, exercise (muscle strengthening and progressive walking), and feedback. Data were analyzed by SPSS/WIN 21.0 using the $x^2$ test and repeated measures ANOVA. Results: The mean age of the participants was 60.9 years and 25 men (54.5%) and 21 women (45.7%) were included in the study. There were significant intervention effects on pain reduction and increased physical function but no effects on quality of life. Conclusion: The 12-week-SEP provided pain relief and enhanced physical function in patients underwent THA. Clinical application of the 12-week-SEP can improve postoperative nursing practices for patients with THA. Future research with larger sample is of necessity to obtain greater generalizability of the empirical evidences of the 12-week-SEP.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.37-43
• /
• 2018

In orthopedic surgery and in particular in total hip arthroplasty, the implant fixation is carried out using a surgical cement called polymethylmethacrylat (PMMA). This cement has to insure a good adhesion between implant and bone and a good load distribution to the bone. By its fragile nature, the cement can easily break when it is subjected to a high stress gradient by presenting a craze zone in the vicinity of inclusion. The focus of this study is to analyze the effect of inclusion in some zone of cement in which the loading condition can lead to the crack opening leading to their propagation and consequently the aseptic loosening of the THR. In this study, the fracture behavior of the bone cement including a strange body (bone remain) from which the onset of a crack is supposed. The effect of loading condition, the geometry, the presence of both crack and inclusion on the stress distribution and the fracture behavior of the cement. Results show that the highest stresses are located around the sharp tip of bony inclusion. Most critical cracks are located in the middle of the cement mantle when they are subjected to one leg standing state loading during walking.