• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.647-652
• /
• 1999

The purpose of this study is to find the bond properties of deformed bars in hign-strength concrete by experimental and analytical method. In this study the following variables were adopted, i.e. (1) the compressive strength of concrete : 270, 400 and 600kg/$\textrm{cm}^2$ (2) the corrosion the bars : corroded and normal bars (3) the mixing ratio of natural and smashed fine aggregate : 7 : 3 and 5 : 5 (natural sand : smashed sand) For analytical method, the finite element analysis is performed. And the Pull-out test is performed as the experimental method.

• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.158-167
• /
• 1995

농도 5w%의 초고분자량 폴리에틸렌(분자량:1.5$\times$106)을 상온으로 냉각시켜 벨을 만 들고 이를 방사하여 섬유를 제조하였다. 이때 방사구를 나온 섬유를 $0^{\circ}C$에서 9$0^{\circ}C$까지의 냉 각조를 통과시켜 젤화/결정화 온도를 다르게 하였다. 최대 연신비는 온도가 $0^{\circ}C$에서 7$0^{\circ}C$까 지 증가함에 따라서 증가하고 9$0^{\circ}C$에서 젤화/결정화시킨 섬유의 경우에는 감소한다. 시차주 사열분석, 배향, 인자, 복굴절률, 절단강도와 탄성률을 측정하여 섬유의 물성에 대해 고찰하 였다. 연신비의 증가에 따른 결정화도, 용융 온도, 복굴절률의 증가는 높은 온도에서 젤화/ 결정화시킨 섬유인 경우가 더 뚜렷했다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.92-98
• /
• 2014

Spacer is a construction material for maintaining cover depth and steel installation, however several problems like staining, leakage, and cracking are currently issued due to performance degradation and unsatisfactory dimensional stability of spacer. Plastic composite is widely used for prevention of brittle failure in cement based material, which yields improvement of crack resistance and ductile failure. This study is for development and applicability evaluation of high strength spacer with slag cement for environmental load reduction and plastic composite like polypropylene fiber, nylon fiber, and glass fiber. For this work, unit weight of 4 different plastic fibers are evaluated through preliminary tests. Physical tests including compressive, flexural, and tensile strength and durability tests including absorption, permeability, length change, crack resistance, carbonation, and freezing and thawing are performed. Through various tests, optimum plastic fiber is selected and manufacturing system for high strength spacer with the selected fiber is developed. Dimensional stability of the developed spacer is evaluated through field applicability evaluation.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.773-781
• /
• 2008

As buildings are becoming taller and longer-spanned, the requirements of high-strength and reliable steels are becoming increasingly stringent. Structural steels, however, acquire significantly different mechanical properties when their strength becomes higher. In this study, the mechanical properties, welding characteristics, and conformities of the 600MPa-grade high-strength steel were tested. The 600MPa-grade steel plates exhibited stable criterion strengthvalues and showed low carbon equivalents (${\mathcal{Ceq}}$) and composition (${\mathcal{Pcm}}$) as well as excellent welding hardness. In the tensile strength test, all the specimens were found to have strengths of over 600MPa. In the Sharphy impact test, the impact-absorbed energy of the V-notch specimens was shown to be 47J at the KS limit. Moreover, the maximum hardness of the specimens in the weld-heat-affected zone at a normal temperature was the same as that before welding. Their weld metal properties, however, were found not to be as good as those of high-strength steel. As such, the details of high-strength steel must be determined.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.541-544
• /
• 2006

Currently the bolt joint defect occurs from the steel bridge which is in the process of using but that investigation about each kind defect is lacking state. Research to see consequently the high strength bolt joint sliding conduct bring the model it used a structural analysis program LUSAS numerical analysis execution and a plan for Steel Box Girder Bridge copying full-size H-Beam and plan pretensioned bolt force 100%. 75%, 50% and 25% pretensioned force it acted in standard. And a hold an examination, against the sliding loads which it follows in the pretensioned force it will analysis.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.243-249
• /
• 2019

This study was conducted on elderly women in their 60s and 70s, and the results of the study were as follows when line dancing for 60 minuctes every three times a week for 12 weeks on dementia and aging-related hormones. After 12 weeks of line dancing programs, BDNF, DHEA-s, and estrogen increased, but no statistically significant differences with control groups emerged. In addition, after 12 weeks of line dancing, Apolipoprotein B decreased in line dancing group but showed no statistically significant difference from control group. Although significant differences between groups were not identified in the results of this study, positive effects on preventing and aging of dementia were identified in the group applying the line dance program, and further studies considering the new target and hign kinetic strength, frequency, time, and athletic genre are needed to identify the distinct effects of line dancing in the future.