• Title/Summary/Keyword: Highway vehicles

Search Result 385, Processing Time 0.027 seconds

Evaluation of Occupant Protection of Passenger Vehicles at IIHS Side Impact (소형 승용차량의 측면충돌 시 탑승자 보호성능 평가)

  • Kim, Guanhee;Lim, Jonghun;Lim, Jangho;Park, Insong;Cho, Chongdu
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.22 no.1
    • /
    • pp.46-51
    • /
    • 2014
  • 2,097 deaths out of 5,229 by traffic accident occurred by vehicle to vehicle crash and 855 deaths out of 2,097 occurred at side crash in 2011. Korean government adopted New Car Assessment Program to reduce the wounded and deaths at traffic accident in 1999 and side impact test has been added in 2003. 43 out of 53 vehicles tested in NCAP side impact rated 4 and 5 stars means the highest occupant protection. In this study three small class vehicles have been tested according to Insurance Institute for Highway Safety's side crashworthiness test protocol. IIHS test protocol uses 1,500kg moving barrier rather than NCAP's 950kg and the occupant protection rated Good, Acceptable, Marginal and Poor based on injury measure, structural integrity and head protection.

DTCF: A Distributed Trust Computing Framework for Vehicular Ad hoc Networks

  • Gazdar, Tahani;Belghith, Abdelfettah;AlMogren, Ahmad S.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.3
    • /
    • pp.1533-1556
    • /
    • 2017
  • The concept of trust in vehicular ad hoc networks (VANETs) is usually utilized to assess the trustworthiness of the received data as well as that of the sending entities. The quality of safety applications in VANETs largely depends on the trustworthiness of exchanged data. In this paper, we propose a self-organized distributed trust computing framework (DTCF) for VANETs to compute the trustworthiness of each vehicle, in order to filter out malicious nodes and recognize fully trusted nodes. The proposed framework is solely based on the investigation of the direct experience among vehicles without using any recommendation system. A tier-based dissemination technique for data messages is used to filter out non authentic messages and corresponding events before even going farther away from the source of the event. Extensive simulations are conducted using Omnet++/Sumo in order to investigate the efficiency of our framework and the consistency of the computed trust metrics in both urban and highway environments. Despite the high dynamics in such networks, our proposed DTCF is capable of detecting more than 85% of fully trusted vehicles, and filtering out virtually all malicious entities. The resulting average delay to detect malicious vehicles and fraudulent data is showed to be less than 1 second, and the computed trust metrics are shown to be highly consistent throughout the network.

Identifying the effects of advanced warning devices on the driving behaviors of commercial vehicle drivers (첨단경고장치가 사업용 차량 운전자의 운전행태에 미치는 영향 분석)

  • Park, Jae-Young;Kim, Do-Gyeong
    • International Journal of Highway Engineering
    • /
    • v.20 no.1
    • /
    • pp.137-146
    • /
    • 2018
  • PURPOSES : This study aims to analyze how the installation of advanced warning devices affects individual drivers' driving behaviors with operating record data collected from 100 vehicles. METHODS : With collected data, the changes in individual drivers' driving behaviors, such as Forward Collision Warning (FCW) and Lane Departure Warning (LDW), were investigated with respect to the cumulative distance traveled and driving time. For the analysis, operating record data collected from 100 vehicles for seven months were used. RESULTS : The results showed that individual drivers' driving behaviors could be categorized into six different types. In addition, most of the drivers showed unstable warning patterns in the initial stage after installation of an advanced warning device. Approximately 40% of vehicles equipped with advanced warning systems were found to have positive effects, indicating that the frequencies of both FCW and LDW had been continuously decreasing after installation of the system. CONCLUSIONS : The warning device might be helpful for making drivers' driving behaviors safer. Driving behaviors during the initial stage of the system installation, which might be regarded as an adaptation phase, were found to be very unstable compared with normal situations, indicating that adequate education and training should be provided to all the drivers to prevent operator disruption at the initial installation of the system.

Development of a Vision Sensor-based Vehicle Detection System (스테레오 비전센서를 이용한 선행차량 감지 시스템의 개발)

  • Hwang, Jun-Yeon;Hong, Dae-Gun;Huh, Kun-Soo
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.16 no.6
    • /
    • pp.134-140
    • /
    • 2008
  • Preceding vehicle detection is a crucial issue for driver assistance system as well as for autonomous vehicle guidance function and it has to be performed with high reliability to avoid any potential collision. The vision-based preceded vehicle detection systems are regarded promising for this purpose because they require little infrastructure on a highway. However, the feasibility of these systems in passenger car requires accurate and robust sensing performance. In this paper, an preceded vehicle detection system is developed using stereo vision sensors. This system utilizes feature matching, epipoplar constraint and feature aggregation in order to robustly detect the initial corresponding pairs. After the initial detection, the system executes the tracking algorithm for the preceded vehicles including a leading vehicle. Then, the position parameters of the preceded vehicles or leading vehicles can be obtained. The proposed preceded vehicle detection system is implemented on a passenger car and its performances is verified experimentally.

A Fundamental Study on Feasibility of The Noise on Express Highway As Electrical Power Source (고속도로 소음의 전기에너지 발생원으로의 이용 가능성에 관한 기초연구)

  • Park, Jung-Shin
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.23 no.6
    • /
    • pp.96-103
    • /
    • 2009
  • Wind power, Solar power and Fuel cell is the representative of new and renewal energy sources. In this paper, the frictional noise made by vehicles tire on roads is considered and researched as alternative electrical generation source. The amplitude and waveform of generated electricity with various types of vehicles according to their velocity, weight and distances between vehicles and sensor are measured and analyzed. As a result, all difference effects mentioned above which make the frictional noise affect quality and quantity of generated electricity. Maximum 0.53[V] and 0.028[W] electricity was generated by truck with 100[km/h] velocity on the express way.

Application Methodology of Greenhouse Gases Emission Table for Various Types of Roads and Vehicles (도로기하구조 조건에 따른 차량별 온실가스 배출량 산정사례 적용연구 - 맑은 날씨를 기준으로 -)

  • Lee, Jonghak;Choi, Jaisung;Noh, Kwansub;Hu, Hyejung
    • International Journal of Highway Engineering
    • /
    • v.18 no.1
    • /
    • pp.23-31
    • /
    • 2016
  • PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.

Analysis of dual-mode hybrid by using mode change parameter (모드 전환 상수를 이용한 듀얼 모드 하이브리드 해석 방법)

  • Kim, Nam-Wook;Yang, Ho-Rim;Ahn, Kuk-Hyun;Cho, Sung-Tae;Park, Yoeng-Il;Lee, Jang-Moo
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.539-542
    • /
    • 2006
  • Many researches about next generation vehicles are trending toward HEV which has better fuel economy than an internal-combustion engine. But existing HEV has some defects at specific running states(eg. highway running It is possible that dual-mode hybrid system overcomes that defects. Mode change parameter, ${\gamma}$ helps to analyse the mode changing of dual mode hybrid and is applied at a numerical analysis on testing the performance. There is an additional constraint when vehicles drive on engine mode. No power assistance of battery applies on engine mode. Because vehicles must be sustained by only engine power while vehicle drives on constant speed mode. At the conclusion of this paper, graphs show the ability of motors that satisfy the equilibrium of the lever system. Designers can roughly determine capacities of the motors, parameters of the lever system by this analysing method.

  • PDF

A Study on the Method of Highway Hi-pass Lane Arrangement and Operation (고속도로 영업소 하이패스 차로배치 및 운영에 관한 연구)

  • Lee, Soo Beom;Lim, Joon Beom;Joo, Sung Kab
    • Journal of Korean Society of Transportation
    • /
    • v.31 no.6
    • /
    • pp.22-33
    • /
    • 2013
  • Currently average daily traffic using Hi-pass has increased over 3 times that of 2008 and more than half of highway traffic now uses High-pass. At this juncture, reassessment on the overall operation of Hi-pass is required to improve the safety aspect of toll booths and the flow of traffic. Although existing Hi-pass operation manual presents the methods of alignment, they do not reflect actual forms of vehicles and do not properly take the safety of toll booth and flow of the traffic into consideration. In order to compensate these problems, this study classifies highway tollbooths into two categories of mainline type and interchange type, and establishes the standard of lane alignment by traffic conflict analysis based on the types divided according to geometric structure or environment around the tollbooths. In addition, traffic flows around the tollbooths were reflected with the stage to arrange Hi-pass lanes according to the volume of traffic on the lanes for Hi-pass.

Spatial and Temporal Patterns on Wildlife Road-kills on Highway in Korea (우리나라 고속도로에서 야생동물 로드킬에 관한 시공간 추이 분석)

  • Lee, Gyoungju;Tak, Jong-Hoon;Pak, Son-Il
    • Journal of Veterinary Clinics
    • /
    • v.31 no.4
    • /
    • pp.282-287
    • /
    • 2014
  • The negative impacts of roads on wildlife mortality have been well documented, and one of the most significant impact is wildlife-vehicle collisions (WVCs) in most countries throughout the world. While road impacts on wildlife are a truly global concern with a large socio-economic cost, few researches in Korea have been quantified road-kill occurrence on highways or identified extensively seasonal and geographic patterns of this phenomenon. Therefore, we analyzed highway mortality of wild mammals in Korea using database from five years of nation-wide data on WVCs, and estimated road-kill density by standardizing on per km and per $10^3$ vehicle basis. During 2008 through 2012, a total of 10,940 wildlifes were reported killed on highways, with an average of 2,188 cases per year. There were 2,376 road-kills in 2012, and this equates to 0.01 road-kills per km per week or one road-kill every 88.5 km per week. For time of day, road-kills occurred more frequently in the early morning (05:00-08:00, 38.3%), and day of week did not have a significant influence in any individual year. The road-kill was highest in the spring (March- May, 33.0%) and least in the winter (December-February, 16.1%), and the most frequently killed native species were of Korean water deer (79.7%), raccoon dog (12.7%), Korean hare (3.1%), and leopard cat (1.2%). The overall standardized kill-rate (number/10 km/1,000 vehicles/month) in 2012 was 0.057 with highest on Dangjinyeongdeok highway (0.476), followed by Yeongdong (0.274), Sooncheonwanju (0.233), Iksanpohang (0.187), and Joongang (0.150). This study highlights that the frequency of WVCs are prevalent throughout the highways in Korea. Further work is needed to determine whether such a level of mortality is sustainable from an ecological point of view.

Computational Flow Analysis on Applicability of Vehicle-Induced Wind to Highway to Wind Power Generation (차량 유도풍 풍력발전 활용 가능성의 전산유동해석)

  • Kim, Hyun-Goo;Woo, Sang-Woo;Jang, Moon-Seok;Shin, Hyung-Ki
    • New & Renewable Energy
    • /
    • v.4 no.4
    • /
    • pp.30-36
    • /
    • 2008
  • The possibility of whether the induced wind from a vehicle traveling on highway can be used in wind power generation has been verified through computational flow analysis. The bus which is presumed to accompany relatively strong and wide range of induced wind compared to passenger vehicles because of its wide frontal area has been set as the subject of research. In order to ensure the reliability of research, the flow analysis surrounding the bus on a flat road where median strip is not installed has been compared with a preceding research while the validity of grid system and interpretation method used in this research have been assured by a qualitative method. In case of the median strip type wind power generator system, because it has been verified that a strong streamwise wind speed (5 m/s) is derived from the contraction effect of flow passage between the bus and the median strip while maintaining a relatively consistent upwind wind speed (1.4 m/s) in vertical direction in the wake area after the bus passes by although the change of wind speed is intense, it was decided as having some possibility of wind power generation. In case of the traffic sign panel type wind power generator system installed at the upper top of highway, because the wind speed of 2 m/s level has been derived for a limited time only at a section equal to the length of the bus and a faint induced wind speed less than 0.5 m/s was shown at other regions, it was decided as having almost no possibility of wind power generation.

  • PDF