• Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.63-68
• /
• 2018

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.725-731
• /
• 2004

A field test program was conducted for the newly placed concrete pavement of US Interstate Highway 10 between March 26th and 28th, 2003. The test section was located between Van Horn and Sierra Blanca in Hudspeth County approximately 130 km east of El Paso, Texas. The main objective of the test was collecting moisture-related data to validate the models of effective curing thickness, evaporation rate, and moisture-based maturity. Effect of moisture loss on drying shrinkage strain was studied using additional test instrumentation.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1036-1041
• /
• 2005

Treemaps, a space filling visualization technique, displays a massive data set of hierarchical data interactively on a single computer screen by mapping it to a matrix of rectangles. It allows users to visually inspect and manipulate data to find new relationships or discrepancies that are to difficult to find using traditional techniques. This paper applies treemaps to the evaluation of highway project bids, which contain hundreds or thousands of elements arranged in a hierarchical structure. Through a case study, treemaps are shown to be a potentially effective tool for bid evaluation by both contractors and State or Federal highway officials.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.127-132
• /
• 2002

While the pavement design is based on mechanical property such dynamic elastic modulus, the quality of highway subgrade during construction is controled by the optimum moisture content(OMC) and maximum dry density(${\gamma}$$\_$dmax/). However, since the quality control based on the OMC and maximum dry density does not consider the mechanical characteristics, there is a conceptional gap between design and PMS(pavement management system). Therefore, it is necessary to develope a new qualify control system using mechanical property for highway construction in more rational way. To achieve this goal, it is planned to perform various laboratory tests to collect mechanical properties of subgrade soil samples from several highway construction sites and to propose the relationship between dry unit weight (or OMC) and mechanical parameters. In this paper, the experimental data so far obtained are presented and analyzed. In addition, further research plan is presented and discussed.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.974-979
• /
• 2005

Effective communication flow is a fundamental for the success of any construction projects. The key role of communications among project parties is even more critical in the case of Design-Build (DB) projects. Previous research has shown that these projects have an environment where integration between different project team members and schedule constraints increase channels of communication, and require faster communication flows. This paper summarizes the findings from research analyzing organizational structures and communication flow of the Texas State Highway 130 (SH130) project. Awarded in 2002, the SH130 project, totaling $1.3 billion USD, constitutes the "pilot" application for the DB approach in the state of Texas. A set of observations pertaining to team organization and communication issues in the design-build environment is included.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.294-298
• /
• 2015

In the United States, the completion of Construction Work Zone (CWZ) impact assessments for all federally-funded highway infrastructure improvement projects is mandated, yet it is regarded as a daunting task for state transportation agencies, due to a lack of standardized analytical methods for developing sounder Transportation Management Plans (TMPs). To circumvent these issues, this study aims to create a spatiotemporal modeling framework, dubbed "SWAT" (Spatiotemporal Work zone Assessment for TMPs). This study drew a total of 43,795 traffic sensor reading data collected from heavily trafficked highways in U.S. metropolitan areas. A multilevel-cluster-driven analysis characterized traffic patterns, while being verified using a measurement system analysis. An artificial neural networks model was created to predict potential 24/7 traffic demand automatically, and its predictive power was statistically validated. It is proposed that the predicted traffic patterns will be then incorporated into a what-if scenario analysis that evaluates the impact of numerous alternative construction plans. This study will yield a breakthrough in automating CWZ impact assessments with the first view of a systematic estimation method.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.113-119
• /
• 2013

PURPOSES : The objectives of this study are to develop the eco-friendly pavement material using polyurethane binder and evaluate mechanical properties of the developed binder and concrete. METHODS : The bending beam test was conducted to select the sample candidates of polyurethane binder based on the bending strength. The characteristics of viscosity, curing time, and temperature change of sample binder was examined on different temperature conditions. The mechanical properties of polyurethane binder was estimated using the dynamic modulus testing. The indirect tensile strength test was conducted on polyurethane binder concrete with different gradation and binder content for evaluating the mechanical properties of concretes. RESULTS : Based on the beading beam test, four different binder samples were prepared for estimate the mechanical properties. The viscosity of polyurethane binder tends to increase with increase of liquid temperature and the hardening phenomenon begins 10 to 15 minutes at room temperature after mixing the resin and hardener. It is observed that the dynamic modulus of binder increases as loading frequency increases and change of modulus is found to be the highest in the PU-2I binder type. The PU-2I binder concretes shows the largest value of indirect tensile strength and indirect tensile energy. CONCLUSIONS : The use of polyurethane binder as pavement materials is capable of increasing the pavement performance and reducing the detrimental environmental effect during the highway construction.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.75-84
• /
• 2014

PURPOSES : Traffic congestions which occur in the intersections of arterials lead to mobility and environment problem, and then traffic agencies and engineers have been struggling for mitigating congestions with greenhouse gas emissions. As an alternative of solving theses problems, this study is to introduce a low-cost and high-effectiveness countermeasure as unconventional intersections which are successfully in operation in U.S.. The main feature of unconventional intersections is to reroute turning movement on an approach to other approach, which consequently more green time is available for the progression of through traffic. Due to improved progression, this unique geometric design contributes to reduce delays with greenhouse gas emission and provides a viable alternative to interchanges. This study is to evaluate the potential operation and environment benefits of unconventional intersections. METHODS : This study used the VISSIM model with Synchro and EnViVer. Synchro is to optimize signal phases and EnViVer model to estimate the amount of greenhouse gas emissions by each condition. RESULTS : The result shows that unconventional intersections lead to increase the capacity and to reduce greenhouse gas emissions, compared to existing intersections. CONCLUSIONS : Unconventional intersections have the ability to positively impact operations and environments as a low-cost and high-effectiveness countermeasure.

• Journal of Environmental Impact Assessment
• /
• v.13 no.1
• /
• pp.21-31
• /
• 2004

Construction of highway would influence wildlife habitat being fragmented and deteriorated. It is inevitable to observe the death of animals that are killed by vehicles. Nonetheless the cause and status of animal roadkill have not been studied, and this study first attempted to analyze the roadkill in major highway in Korea. We collected 860 individuals of dead animals in Joongang Highway during 1996-2003. Among them Korean hare(Lepus sinensis) was totaled in 165 individuals(19.2%) with the highest figure; Korean racoon dog(Nyctereutes procyonoides) was 146(17.0%); Korean squirrel(Sciurus vulgaris) 56(6.5%); Korean roe deer(Capreolus capreolus) 26(3.0%). Domestic animals was totaled in 232 individuals(27.0%); domestic dog(Canis familiairis) 25, and domestic cat(Catus felis) 207. This study also categorized habitat as mountain-mountain, mountain-plain, mountain-river, plain-plain, plain-river, river-river in each side of the road. Habitat of mountain-plain was the heightest with 296(38.9%) individuals followed by mountain-mountain with 263(34.6%). This indicates that wild animals associated with mountain habitat was most influenced by the construction of roads. This study implied that we should mitigate the roadkill by designing artificial construction such as eco-bridge, fences along the sideway, and boxes under the highway, underdrain structure, etc. The monitoring and cause of habitat fragmentation with GIS approach should be followed to reduce the roadkill.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.