• Archives of Metallurgy and Materials
• /
• v.66 no.3
• /
• pp.675-678
• /
• 2021

In order to the long-term stability of DSE for electroplating process, the lifetime equations were calculated from the results of the accelerated life testing, and the lifetime of DSE was predicted. The nano-embossing pre-treatment led to 2.65 times in the lifetime of DSE. The degradation mechanism of DSE with a thick metal oxide layer for applied highly current density process condition was identified. The improvement of durability of DSE seems to be closely related to adhesion between titanium plate and mixed metal oxide layer.

• International Journal of Reliability and Applications
• /
• v.15 no.2
• /
• pp.85-98
• /
• 2014

Accelerated life testing (ALT) is a well famous technique in life testing and reliability studies, this is particularly used to induce so high stress leading to failure of the highly reliable units quickly under stipulated duration of time. The step-stress ALT is one of the systematic experimental strategy of ALT applied to fail the units in steps. In this article we focus on two important issues (i) necessity of life tests at higher steps with relevant causes (ii) to develop a new optimum test plan for 3-step SSALT under the modified cumulative exposure model proposed by Khamis and Higgins (1998). It is assumed that the lifetime of test units follows Rayleigh distribution and its scale parameter at constant stress level is assumed to be a log-linear function of the stress. The maximum likelihood estimates of the parameters involved in the step-stress ALT model are obtained. A simulation study is performed for numerical investigation of the proposed new optimum plan 3-step, step-stress ALT. The necessity of the life test units at 3-step step-stress is also numerically examined in comparison to simple step-stress setup.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.732-738
• /
• 2006

This research provides a scheme for Highly Accelerated Stress Test that is necessary to demonstrate reliability prediction of Korean Rapid Transit Railway Train Control System sub-equipment, which is calculated by a relevant standard for failure rate prediction of electronic products. Although determining failure information generated in the process of trial running by statistic analysis is widely accepted as a measure of confirmation for reliability prediction, this research suggests the modeling for System Life Test determined by accelerating stress factors as a measure of confirmation for reliability prediction of sub-equipment unit that is generated ahead of a trial running in System Life Cycle. Consequently, the research demonstrates sub-equipment unit reliability test, which is based on the model derived from Accelerated Stress Test, according to accuracy level and the number of samples, and conducts an official experiment by making out a reliability test procedure sheet based on test time as well.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.945-952
• /
• 2006

Several accelerated life test plans use tests at only two levels of stress and thus, have practical limitations. They highly depend upon the assumption of a linear relationship between stress and time-to-failure and use only two extreme stresses that can cause irrelevant failure modes. Thus 3-level stress plans are preferable. When the lifetime distribution of test unit is exponential with mean lifetime $\theta_i$ at stress $x_i$, i=0, 1, 2, 3, we derive the optimum quadratic plan under the assumption that a quadratic relationship exists between stress and log(mean lifetime), and propose the compound linear plans, as an alternative to the optimum quadratic plan. The proposed compound linear plan is better than two other compromise plans for constant stress testing and nearly as good as the optimum quadratic plan, and has the advantage of simplicity.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2010

In-Wheel System is a high-efficiency system to supply a new concept of platform which raises the efficiency of motor drive system and applies it to an environment-friendly automobile by installing a highly efficient electric motor directly to wheels and removing factors of power train. The proliferation of these systems is directly related to the safety of our lives, so check the reliability of the part in the development phase and should be certified. Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This paper presents to the verification methods for durability, one of reliability assessments of the Motor, the study calculated acceleration and deceleration torque and the effective torque from driving conditions of In-Wheel Motor, and based on this, it reduced the test time and suggested the verification methods of In-Wheel Motor reliability through the accelerated life test.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.489-499
• /
• 2009

Through the process of HALT (Highly Accelerated Life Test) between 2003 to 2008, we are about to research on the design method for minimum test for all error modes that are classified and analyzed to obtain more margin able product.

• Journal of Applied Reliability
• /
• v.14 no.1
• /
• pp.59-70
• /
• 2014

The requirements of reliability verification for new products and technology are increasing more and more in accordance with the trend of climate change prevention and GHG reduction technology, functional skills. SCA(Swirl Control Actuator) is the important part of a car intake manifold system. This device generates swirl that is mixing the fuel and air into the engine combustion chamber. This is to improve output for engine and reduce the emission for exhaust. In this article reliability assessment criteria for swirl control actuator for automobiles are established in terms of basic HALT and life time test.

• Journal of Applied Reliability
• /
• v.13 no.1
• /
• pp.19-30
• /
• 2013

The requirements of reliability verification for new products and technology are increasing more and more in accordance with the trend change of strength for safety technology, functional skills and emotional quality. In order to conduct the purpose of robust design from the stage of product development recently, the application of reliability technology has gradually increased such as detecting the failure mode throughout the HALT technique, accelerated tests and so on. The main results are as follows; i) through the pre-test and analysis, detected the basic performance and predictable failure mode, ii) HALT technique and process has been developed that can be applied test methods for the next new products.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.274-280
• /
• 2010

Through the process of HALT (Highly Accelerated Life Test) between 2003 to 2008, we are about to research on the design method for minimum test for all error modes that are classified and analyzed to obtain more margin able product.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.397-403
• /
• 2001

본 논문은 시장 사용 조건에서 발생한 PC제품의 Main board 고장품이 회수 후 검토 시 정상적으로 기능하여 나타나는 NDF(No Defect Found) 판정 상황에 대한 효과적인 검토 방안을 제시한다. NDF 시료의 고장성 진위 여부를 가리기 위해 HALT(Highly Accelerated Life Test)기술을 응용한 결과 기존의 시험 검토 방법보다 높은 재현 효과를 보았다. 결함 제품의 잠재적인 취약부위를 단시간에 효과적으로 촉진하고 들춰내는 HALT 기술은 전자 제품의 NDF성 고장을 기술적으로 접근하여 개선할 수 있는 기초를 제공하는 유용한 가속 스트레스 시험 기술임이 입증되었다.