• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.157-162
• /
• 2007

Emulsification sausages were prepared in 3 different ways: T1: fat added after ice, T2: fat added before ice, T3: all ingredients added together. Each sample was ground for 4.5 min by a silent cutter at $15^{\circ}C$ and emulsified batters were stuffed into fibrous casing and then cooked for 40 min at $78^{\circ}C$ to determine the effect of the order of ingredient addition on the qualities of emulsion type sausage. The pH of T1 sausage was significantly higher, whereas the pH of T3 was significantly lower compared with the other samples(p<0.05). The shear force was significantly higher in T1 sausage, however the hardness and gumminess were significantly lower in T1 sausage compared with other two types(p<0.05). With regard to sensory evaluation, the relative amounts of flavor can be summarized as T2>T1>T3, and the color was significantly higher in T1 and T2 compared with T3(p<0.05). There was no significant difference among the test sausages with regard to aroma, juiciness, tenderness and overall acceptability(p>0.05). There were no significant differences in free moisture, water holding capacity(WHC), meat color and texture properties such as brittleness, cohesiveness, springiness and chewiness. As a result of this study, the sausage were much for sausage prepared by adding the fat after the ice(T1) than the other sausage samples in which fat was added after ice to make emulsion type sausages.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.615-621
• /
• 2015

Lactobacillus plantarum FH185 was isolated from the feces of healthy adults. In our previous study, L. plantarum FH185 was demonstrated that it has anti-obesity effect in the in vitro and in vivo test. In order to determine its potential for use as a probiotic, we investigated the physiological characteristics of L. plantarum FH185. The optimum growth temperature of L. plantarum FH185 was 40℃. L. plantarum FH185 showed higher sensitivity to novobiocin in a comparison of fifteen different antibiotics and showed higher resistance to polymyxin B and vancomycin. It also showed higher β-galactosidase and N-acetyl-β-glucosaminidase activities. Moreover, it was comparatively tolerant to bile juice and acid, and inhibited the growths of Salmonella Typhimurium and Staphylococcus aureus with rates of 44.76% and 53.88%, respectively. It also showed high adhesion activity to HT-29 cells compared to L. rhamnosus GG.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.216-221
• /
• 2004

In two dimensional incompressible flaws, a preconditioning technique called Hierarchical Iterative Procedure(HIP) has been implemented on a SUPG finite element formulation. By using the SUPG formulation, one can escape from the LBB constraint and hence achieve an equal order formulation. In this paper, we increased the order of interpolation up to cubic. The conjugate gradient squared(CGS) method is used for the outer iteration, and the HIP for the preconditioning for the incompressible Navier-Stokes equation. The hierarchical elements has been used to achieve a higher order accuracy in fluid flaw analyses, but a proper efficient iterative procedure for higher order finite element formulation has not been available so far. The numerical results by the present HIP for the lid driven cavity flaw showed the present procedure to be stable, very efficient and useful in flaw analyses in conjunction with hierarchical elements.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.27-36
• /
• 2024

The towing distance, which is speed over the ground, and the water flow quantity, which is speed through the water, were used when estimating the amount of Metapenaeus joyneri resources that rose to the surface at night using the swept area method in order to compare and analyze the difference. It was conducted using a shrimp dredge, trial fishing gear for catching Metapenaeus joyneri. Catch during the entire survey period was 188.9 kg. Monthly catch ranged from 3.1 to 109.2 kg, highest in June and lowest in September. The swept volume calculated using the speed over the ground was about 13% higher than using the speed through the water. Metapenaeus joyneri resources estimated using the towing distance ranged from 320.1 to 14,649.8 kg. Resources estimated using the water flow quantity ranged from 278.5 to 12,886.3 kg. Therefore, the amount of Metapenaeus joyneri resources estimated using the speed over the ground was about 14% higher than the method using the speed through the water, indicating that the amount of resources was overestimated.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.389-395
• /
• 2017

In this paper, we investigate the characteristics of membrane fouling caused by water temperature in the Membrane bioreactor(MBR) process and try to derive the membrane fouling control by chemical enhanced backwashing(CEB). The extracellular polymeric substances(EPS) concentration was analyzed according to the water temperature in the MBR, and the membrane fouling characteristics were investigated according to the conditions, with sludge & without sludge, through a lab-scale reactor. As shown in the existing literature the fouling resistance rate was increased within sludge with the water temperature was lowered. However, in the lab-scale test using the synthetic wastewater, the fouling resistance increased with the water temperature. This is because that the protein of the EPS was more easily adsorbed on the membrane surface due to the increase of entropy due to the structural rearrangement of the protein inside the protein as the water temperature increases. In order to control membrane fouling, we tried to derive the cleaning characteristics of CEB by using sodium hypochlorite(NaOCl). We selected the condition with the chemicals and the retention time, and the higher the water temperature and the chemical concentration are the higher the efficiencies. It is considered that the increasing temperature accelerated the chemical reaction such as protein peptide binding and hydrolysis, so that the attached proteinaceous structure was dissolved and the frequency of the reaction collision with the protein with the chemical agent becomes higher. These results suggest that the MBRs operation focus on the fouling control of cake layer on membrane surface in low temperatures. On the other hand, the higher the water temperature is the more the operation strategies of fouling control by soluble EPS adsorption are needed.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.1
• /
• pp.43-48
• /
• 2015

This study was carried out in order to investigate the photosynthesis response and leaf characteristics of Peucedanum japonicum growing in forest farming. The experiment was performed by leaf mold (pine tree and chestnut tree) and shading levels (0%, 35%, 50% and 75% shading). Light relative intensity was 100% (full sunlight), 60.3% (35% shading), 35.1% (50% shading), and 17.4% (75% shading) respectively. Light response curves of pine-leaf mold and chestnut-leaf mold were the highest in control (full sunlight) and these were getting lower in the higher shading level. Photosynthesis capacity and light saturation point were indicated higher in chestnut-leaf mold within the same shading level. As the shading level increased, maximum photosynthesis rate decreased. And apparent quantum yield was not indicated statistically significant difference from all treatment. Leaf area, leaf length and leaf width were significant higher in 35% shading and control under chestnut-leaf mold in all treatment. As the shading level increased, LAR (leaf area ratio), SLA (specific leaf area) and SPAD value decreased in pine-leaf mold and chestnut-leaf mold. As a result of surveying the whole experiment, P. japonicum is judged better growth and higher yield by maintaining 35% shading (relative light intensity 60%) under chestnut-leaf mold in forest farming.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.1
• /
• pp.26-29
• /
• 2014

The corrosion behavior of stainless steel 304 (SS 304), titanium, nickel and aluminium is studied by immersion and anodic polarization tests in non-aqueous electrolytes. Tetraethyl ammonium tetrafluoroborate is used as a supporting electrolyte in the three kinds of solvents. The immersion test shows that chemical corrosion rate in propylene carbonate-based electrolyte is lower than those in acetonitrile- or ${\gamma}$-butyrolactone-based electrolytes. Surface analyses do not reveal any corrosion product formed after the immersion test. In the anodic polarization tests, a higher concentration of supporting electrolyte gives a higher current density. In addition, a higher temperature increases the current density in the active region and reduces the potential range in the passive region. SS 304 shows the highest corrosion potential while Al shows the lowest corrosion potential and the highest current density in all studied conditions. Based on the conducted corrosion tests, the corrosion resistance of metal substrates in the organic solvents can be sorted in descending order as follows: SS 304 - Ti - Ni - Al.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.1
• /
• pp.54-67
• /
• 1997

Korean societies have been experiencing the wholesale structural changes in the rapid currents of recent openness, globalization and democratization, which effect much more heavily in rural areas than in urban areas, so rural recomposition works being an important national concern. In order to systematically reconstruct the rural structure, the decision makers, with a four step hierarchy of rural resident-residents group-community-region, should be endowed with the objective judgement on basic elements of resource potentialities under their control. In this process. rational resource evaluation works would be firstly necessiated from expert groups. Based on the view mentioned above, this study principally aimed at developing a rational evaluation framework for rural resources. For that objective, the first step of the study pigeonholed the total resources items identifiable in rural areas from the existing study results, spatial planning and field surveying data. After then, using the formalized classification criteria of resources items, a tentative goal system for rural resources evaluation was proposed and the final one determined through expert-group checking. The results obtained during the study are summarized as follows ; 1. Using the existing examples of resources identification/classification and the basic data list for county-level development planning as the principal reference ones, total rural resources elements were classified into 3 constituent units : land, natural environment and human resources, which correspond to places to work, to play and to live, respectively, as 3 constituent ones of life-supporting space. 2. Three characteristic areal types were adopted to represent the total rural areas : lowland, upland and seashore areas, and also 3 practical use types to represent the objectives of resources evaluation systems : for land use planning, natural conservation policy and village improvement planning. Thus 9 different types of goal system for resources evaluation were developed(each system by 3 areal typesX3 practical use types) 3. Each goal system has 3-tier classification steps from the higher, middle and lower one. The higher and middle steps should contain equally applicable components to all the rural areas, of which allowable number being around 3 and 4 respectively. However the lower step would contain detailed sub-components changeable to areal characteristics of which allowable number being around 7.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.49-61
• /
• 2008

The objective of this study is to survey the risk factors of greenhouse vegetables farmers' work-related musculoskeletal disorders(MSDs). To offer the fundamental data for agricultural improvement of greenhouse vegetable farms, the questionnaire of MSDs and heath condition were carried out. A group of 736 workers(males=492, females=244) in 6 branches constitutes the population and database for the analysis between 2004 and 2005. The sample branch was chosen based on paper are watermelon, strawberry, tomato, melon, cucumber, lettuce. The results are as follows: 1. Smoking rates in cucumber and tomato is the highest. 2. Drinking rates in strawberry, cucumber and lettuce is the highest in males, watermelon and melon are the highest in females. 3. Regular exercise rates in melon are the highest. 4. Physical and mental fatigue in females is higher than that of males in most crops except melon. That of strawberry and tomato is the highest. 5. The prevalence rates of medical diagnosed diseases are higher in order of osteoarthritis, herniated nucleus pulposus(HNP), and hypertension. That of strawberry, melon, and cucumber is high in case of osteoarthritis; Strawberry, melon, and watermelon are high in case of HNP. 6. Prevalence rates of musculoskeletal symptoms among the various pain areas are higher in order of low back, knees, and shoulders. That of tomato and watermelon is high in case of low back; strawberry and tomato are high in case of knees. These results can be used practically for agricultural improvement of greenhouse vegetables farms to prevent MSDs.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.57-61
• /
• 2010

In order to make higher domestic self-sufficiency ratio of energy resources, these are required to purchase the producing oil & gas fields through the investment of oversea petroleum development, to make M&A, and to enhance recovery in the existing oil & gas fields. For this purpose, it is essential to acquire the core technology regarding the evaluation, design, and management of oil & gas fields. The accumulation of technology of the evaluation, optimal design, proper management of production fields by the help of the continuous R&D program will make great contribution for higher domestic self-sufficiency ratio by the increased number of purchase of foreign producing fields, the increase amount of produced petroleum out of existing fields, and the effective management of the oil and gas fields.