• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.207-216
• /
• 2004

This study was carried out to select the promising forage crops for forage production in paddy field of NLRI, RDA, Suwon from 1999 to 2001. The species of forage crop used in this experiment were barley(3 varieties), wheat(2), rye(3) and Italian ryegrass(IRG, 3). Stages of heading, milk and yellow ripe of barley were 1 May, middle May and late May, respectively. In milk to yellow ripe stage, dry matter(DM) and total digestible nutrient(TDN) yield of barley were $7.30{\sim}9.58$ MT and $4.75{\sim}6.24$ MT per ha, and Albori was the most promising variety among the barley. The growth of wheat was a little late compared to that of barley. but it seemed to be crop having higher forage yield and nutritive value. In milk to yellow stage, DM and TDN yield of wheat were $8.17{\sim}10.82$ MT and $5.33{\sim}7.31$ MT per ha. Heading stage of rye was 27 to 29 April, and it seemed to be suitable for harvest at heading to flowering stage because of heavy lodging after flowering. In flowering stage, DM and TDN yield of rye were 10.18 and 6.03 MT per ha. Heading stage of early maturing IRG was 7 May and it seemed to be good for harvest at flowering stage of middle May in cropping system. In flowering stage, DM and TDN yield of early type IRG were 4.48 and 2.96 MT per ha. The results demonstrated that the promising forage crops for forage production in paddy. field were rye and barley(Albori) in Middle region, and rye harvesting at early May was recommended when considered middle May of rice transplanting period, and rye and barley considered late May of rice planting period. Also early maturing and high yielding IRG variety was strongly needed.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.275-283
• /
• 2012

Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.157-176
• /
• 2016

For a long time, mobile phone had a sole function of communication. Recently however, abrupt innovations in technology allowed extension of the sphere in mobile phone activities. Development of technology enabled realization of almost computer-like environment even on a very small device. Such advancement yielded several forms of new high-tech devices such as smartphone and tablet PC, which quickly proliferated. Simultaneously with the diffusion of the mobile devices, mobile applications for those devices also prospered and soon became deeply penetrated in consumers' daily lives. Numerous mobile applications have been released in app stores yielding trillions of cumulative downloads. However, a big majority of the applications are disregarded from consumers. Even after the applications are purchased, they do not survive long in consumers' mobile devices and are soon abandoned. Nevertheless, it is imperative for both app developers and app-store operators to understand consumer behaviors and to develop marketing strategies aiming to make sustainable business by first increasing sales of mobile applications and by also designing surviving strategy for applications. Therefore, this research analyzes consumers' mobile application usage behavior in a frame of substitution/supplementary of application categories and several explanatory variables. Considering that consumers of mobile devices use multiple apps simultaneously, this research adopts multivariate probit models to explain mobile application usage behavior and to derive correlation between categories of applications for observing substitution/supplementary of application use. The research adopts several explanatory variables including sociodemographic data, user experiences of purchased applications that reflect future purchasing behavior of paid applications as well as consumer attitudes toward marketing efforts, variables representing consumer attitudes toward rating of the app and those representing consumer attitudes toward app-store promotion efforts (i.e., top developer badge and editor's choice badge). Results of this study can be explained in hedonic and utilitarian framework. Consumers who use hedonic applications, such as those of game and entertainment-related, are of young age with low education level. However, consumers who are old and have received higher education level prefer utilitarian application category such as life, information etc. There are disputable arguments over whether the users of SNS are hedonic or utilitarian. In our results, consumers who are younger and those with higher education level prefer using SNS category applications, which is in a middle of utilitarian and hedonic results. Also, applications that are directly related to tangible assets, such as banking, stock and mobile shopping, are only negatively related to experience of purchasing of paid app, meaning that consumers who put weights on tangible assets do not prefer buying paid application. Regarding categories, most correlations among categories are significantly positive. This is because someone who spend more time on mobile devices tends to use more applications. Game and entertainment category shows significant and positive correlation; however, there exists significantly negative correlation between game and information, as well as game and e-commerce categories of applications. Meanwhile, categories of game and SNS as well as game and finance have shown no significant correlations. This result clearly shows that mobile application usage behavior is quite clearly distinguishable - that the purpose of using mobile devices are polarized into utilitarian and hedonic purpose. This research proves several arguments that can only be explained by second-hand real data, not by survey data, and offers behavioral explanations of mobile application usage in consumers' perspectives. This research also shows substitution/supplementary patterns of consumer application usage, which then explain consumers' mobile application usage behaviors. However, this research has limitations in some points. Classification of categories itself is disputable, for classification is diverged among several studies. Therefore, there is a possibility of change in results depending on the classification. Lastly, although the data are collected in an individual application level, we reduce its observation into an individual level. Further research will be done to resolve these limitations.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.108-113
• /
• 1984

To find out the differences in micro-meteorological changes in the rice plant canopy at the different growing stages, Seokwang-byo, a high yielding variety, was cultivated with three planting densities of 50, 80 and 110 hills per $3.3m^2$ in 1982, and Seokwangbyo and Chucheong-byo, a local variety, were planted with a density of 80 hills per $3.3m^2$. Air temperature in plant canopies, water and soil temperatures were continuously monitored throughout the growing period. The relationship between solar radiation interception and leaf area indices at different height in the canopy also was studied. The results were as follows: 1. Air temperature in the densely planted canopy was 1 to $1.5^{\circ}C$ higher than that in the sparsely planted one at the early growing stage, but was inverted after 60 days of transplanting. The vertical distribution of temperature in the canopies showed that air temperature at 10 cm height from the ground was higher than that at 30 cm height. The temperature inversion occurred showing lower temperature at the 10 cm height than at the 30 cm height. 2. The highest temperature of a day in the canopy occurred at 14:00 to 15:00 Korean Standard Time same as that of air temperature, but approached to the solar noon time as the plants grew thick. 3. The air temperature in the canopy became higher than water temperature when the leaf area indices were 4.6 for Chucheongbyo and 5.2 for Seokwangbyo, and the light penetration ratios were 40 percents. 4. Light extinction coefficients of the 50 to 70 cm layer of the canopies were 0.3 to 0.5 but decreased at the lower layers. 5. Albedo of the canopies was 0.4 in the morning and evening while that was about 0.25 at noon. The difference in albedo between Seokwangbyo and Chucheongbyo could be recognized with the difference in leaf structure.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.142-149
• /
• 2016

'Shinseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2015. The cultivar 'Shinseong' was selected from the cross RONDO/2$^*$ERIZO_11//KISSA_4/3/ASNO/ARDI_3//ERIZO_7 by CIMMYT (Mexico) in 1998. Subsequent generations were handled in pedigree selection programs at Mexico from 1999 to 2004, and a line 'CTSS98Y00019S-0MXI-B-3-3-5' was selected for earliness and good agronomic characteristics. After preliminary and advance yield testing in Korea for 3 years, the line was designated 'Iksan47'. The line was subsequently evaluated for earliness and forage yield in seven locations, Jeju, Iksan, Cheongwon, Yesan, Gangjin, Daegu, and Jinju from 2013 to 2015 and was finally named 'Shinseong'. Cultivar 'Shinseong' has the characteristics of light green leaves, yellow culm and spike, and a medium grain of brown color. The heading date of cultivar 'Shinseong' was April 24 which was 3 days earlier than that of check cultivar 'Shinyoung'. The tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust of 'Shinseong' were similar to those of the check cultivar. The average forage dry matter yield of cultivar 'Shinseong' at milk-ripe stages was $15MT\;ha^{-1}$, which was 3% lower than that ($15.5MT\;ha^{-1}$) of the check cultivar 'Shinyoung'. The silage quality of 'Shinseong' (6.7%) was higher than that of the check cultivar 'Shinyoung' (5.9%) in crude protein content, while was similar to the check cultivar 'Shinyoung' in acid detergent fiber (34.6%), neutral detergent fiber (58.6%), and total digestible nutrients (61.6%). It showed grain yield of $7.2MT\;ha^{-1}$ which was 25% higher than that of the check cultivar 'Shinyoung' ($5.8MT\;ha^{-1}$). This cultivar is recommended for fall sowing forage crops in areas in which average daily minimum mean temperatures in January are higher than $-10^{\circ}C$.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.324-327
• /
• 2009

A new sprout-soybean cultivar, "Galchae" was developed at the National Institute of Crop Science (NICS) in 2008. Galchae was selected from a cross between YS1287 and Jinju#1. The preliminary, advanced, and regional yield trials to evaluate the performance of Iksan 64 were carried out from 2005 to 2008. This cultivar has a determinate growth habit with purple flower, brown pubescence, brown seed coat, brown hilum, rhomboid leaflet shape and small seed size (8.4 grams per 100 seeds). The maturity date of "Galchae" is 6 days later than the check variety, "Dawon". It has good seed quality for soybean-sprout and resistance to lodging. This cultivar has resistance to soybean mosaic virus (SMV) and necrotic symptom (SMV-N). The average yield of "Galchae" was 2.51 ton per hectare in the regional yield trials (RYT) for double cropping carried out for two years from 2007 to 2008.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.690-694
• /
• 2010

A new soybean cultivar for soy-paste, 'Daeyang', was developed from the cross among 'Jangyeobkong', 'Hwaeomputkong' and 'Suwon192' by the soybean breeding team at the National Institute of Crop Science (NICS) in 2007. A promising line, SS97214-80-1, was selected and named this line 'Milyang163'. It was prominent and had good result from regional adaptation yield trials (RYT) for three years from 2005 to 2007 and released as the name of 'Daeyang'. It has a determinate growth habit, purple flower, grey pubescence, yellow seed coat, yellow hilum, large spherical seed (25.2 g per 100 seeds). 'Daeyang' is resistant to soybean mosaic virus and moderately resistant to bacterial pustule, the major soybean disease in Korea. The average yield of 'Daeyang' was 2.58 ton per hectare in the regional yield trials (RYT) carried out for three years from 2005 to 2007 which was 3 percent higher than the check variety, 'Taekwang'.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.253-259
• /
• 2018

A new barley (Hordeum vulgare L.) cultivar 'Mihan' having ruminant-palatable semi-smooth awn and good silage quality was developed at National Institute of Crop Science(NICS), RDA in 2016. This cultivar was derived from a cross of the 'SB00T2064' and 'Suwon385' in 2001. And its promising line showed high yielding through the preliminary yield trials(PYT) and advanced yield trials (AYT) in Iksan from 2012 to 2013. It was designated as the 'Iksan487'. 'Iksan487' was conducted to regional yield trials (RYT) in one upland field and five paddy fields around Korea for three years from 2014 to 2016. And it was released as the name of 'Mihan'. It has growth habit of IV, erect plant type, green leaf and semi-smooth awn. Its heading date was April 23 in the paddy field and maturing date was May 24. Plant height of 'Mihan' was 96cm. Mihan's spikes per $m^2$ was 665. It has better winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus) than that of barley cultivar 'Youngyang'. The average dry matter of 'Mihan' was about $10.9ton\;ha^{-1}$ in paddy field. And average feed quality of 'Mihan' was 10.3% of crude protein content, 26.1% of ADF (Acid Detergent Fiber), 46.9 % of NDF (Neutral Detergent Fiber) and 68.2% of TDN (Total Digestible Nutrients). 'Mihan' had grade I of silage quality. This cultivar would be suitable for the area above the daily minimum average temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Journal of Plant Biotechnology
• /
• v.46 no.3
• /
• pp.165-171
• /
• 2019

Marker-assisted backcrossing (MABC) is useful for selecting an offspring with a highly recovered genetic background for a recurrent parent at early generation to various crops. Moreover, marker-assisted backcrossing (MABC) along with marker-assisted selection (MAS) contributes immensely to overcome the main limitation of the conventional breeding and it accelerates recurrent parent genome (RPG) recovery. In this study, we were employed to incorporate rin gene(s) from the donor parent T13-1084, into the genetic background of HK13-1151, a popular high-yielding tomato elite inbred line that is a pink color fruit, in order to develop a rin HK13-1084 improved line. The recurrent parent genome recovery was analyzed in early generations of backcrossing using SNP markers obtained from genotyping-by-sequencing analysis. From the $BC_1F_1$ and $BC_2F_1$ plants, 3,086 and 4868 polymorphic SNP markers were obtained via GBS analysis, respectively. These markers were present in all twelve chromosomes. The background analysis revealed that the extent of RPG recovery ranged from 56.7% to 84.5% and from 87.8% to 97.8% in $BC_1F_1$ and $BC_2F_1$ generations, respectively. In this study, No 5-1 with 97.8% RPG recovery rate among $BC_2F_1$ plants was similar to HK13-1151 strain in the fruit shape. Therefore, the selected plants were fixed in $BC_2F_2$ generation through selfing. MAS allowed identification of the plants that are more similar to the recurrent parent for the loci evaluated in the backcross generations. MABC can greatly reduce breeding time as compared to the conventional backcross breeding. For instance, MABC approach greatly shortened breeding time in tomato.