• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.303-309
• /
• 1999

Mass mortality of the Manila clam, Ruditapes philippinarum has been reported all along the west and south coast of Korea for the past several years. As a pathogenic agent, Perkinsus sp., an endoparasitic protozoan has been identified in this study and believed to be responsible for the mass mortalities. Prevalence and infection intensity of Perkinsus sp. was investigated from a Manila clam population inhabiting at Komsoe Bay in the west coast where mass mortality of the clam has been reported. A total of 142 Manila clam, 50 oyster, Crassostrea gigas, 10 ark shell, Scapharca broughtonii, and 5 predatory gastropada, Rapana venosa were examined for the presence and the quantity of Perkinsus sp. Ray's fluid thioglycollate medium method (FTM method) with modified Mackin's infection intensity scale and Choi's quantitative method were used in detecting and quantifying the parasite. All individuals of R. philippinarum examined in this study were infected with Perkinsus sp., indicating $100\%$ prevalence while none of the oysters and the gastropods exhibited the parasite. Six to ten individual hypnospores of Perkinsus sp. were counted from the ark shells. The number of hypnospores in the clam tissues varied from 16,667 to 4,091,667, with a mean number of 1,077,628. Average infection intensity according to Mackin's was 2.87, indicating a moderate infection. A negative correlation was observed between the number of Perkinsus sp. in the tissue and the condition index, a ratio tissue wet weight to shell cavity volume. The clam size and the infection intensity in terms of total number of parasites were positively correlated; the bigger clam, the heavier infection. Such high number of Perkinsus sp. counted in the clams could be enough to cause physiological disturbance of clams, such as retarded growth and reproduction. It is also believed that such a high infection leads mortality of the clam via continuous draining of the energy by metabolic activities and reproduction of the parasites. Correlation between the condition index and the infection intensity observed in this study supports this hypothesis.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.590-598
• /
• 2005

An adequate method to identify chromium separation, Cr(III) and Cr(VI), in water samples were studied by using High Performance Liquid Chromatography(HPLC) coupled with Inductively Coupled Plasma Mass Spectometer(ICP-MS) equipped with Dynamic Reaction Cell(DRC). The characteristic distribution of Cr(III) and Cr(VI) in the raw water taken at the six water intake stations in Seoul, was analyzed by the method developed by the authors. The chromium species separated by HPLC was isocratically conducted by using tetrabutylammonium phosphate monobasic(1.0 mM TBAP), ethylenediaminetetraacetic acid(0.6 mM EDTA) and 2% v/v methanol as the mobile phase. 5% v/v methanol was used as flushing solvent. A reactive ammonia($NH_3$) gas was used to eliminate the potential interference of $ArC^+$. Several Parameters such as solvent ratio, pH, flow rate and sample injection volume were optimized for the successful separation and reproducibility. Although it has been reported thai the separation sensitivity of Cr(III) is superior to that of Cr(VI), the authors observed Cr(VI) was more sensitive than Cr(III) when ammonia($NH_3$) gas was used as the reaction gas. It took less than 3 minutes to analyze chromium species with this method and the estimated detection limits were $0.061\;{\mu}g/L$ for Cr(III) and $0.052\;{\mu}g/L$, for Cr(VI). According to the results from the analysis on chromium species in the raw water of the six intake stations, the concentrations of Cr(III) ranged from 0.048 to $0.064\;{\mu}g/L$(ave. $0.054\;{\mu}g/L$) while that of Cr(VI) ranged from 0.014 to $0.023\;{\mu}g/L$(ave. $0.019\;{\mu}g/L$). Recovery ratio was very high($90.1{\sim}94.1%$). There were two or three times more Cr(III) than Cr(VI) in the raw water.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.98-103
• /
• 2001

In order to understand the characteristics of leachate at the Seokdae municipal waste landfill in the Pusan city, the correlation between leachate pollution loading and volume of gas production. concentration of gas and subsidence of ground, the characteristical methos, geochemical analyses and laboratory column tests using samples of gases, leachate and surface soil of Seokdae waste landfill area. Through the analysis of water balance, leachate flow rate and pollution loading were estimated. Geistatistical analysis of four gas components ( $O_2$, C $H_4$, $H_2$S and CO) shows the possibility of ground subsidence around the group of a site with high concentration of gas. From geochemical analyses of leachate, EC and Total-Alkalinity of ground subsidence around the group of a site with high concentration of gas. From geochemical analysis of leachate, Ec and Total-Alkalinity were increased, and Cl, Cr, Mn, Cu, Zn, Cd and Pb were decreassed comparing to the part, and the type of water quality was Na-HC $O_3$ in trilinear diagram. It shows that biodecomposition of municipal wastes continues actively. From the analysis of water balance, the total leachate flow rate is about 465.11㎥/day and pure pollution loading of Cl, Mn and Fe are estimated to 223.8kg/day, 0.2kg/day, 0.3kg/day, respectively. The laboratory column test of residual soil and landfill soil shows 0.206cm and 0.019cm for linear velocity(equation omitted), 0.234 $\textrm{cm}^2$/min and 0.018$\textrm{cm}^2$/min for diffusion coefficient ( $D_{ι}$), and 1.136cm and 0.095cm longitudinal dispersion index ($\alpha$$_{ι}$), respective]y. It demonstrates that the delay time of contamination for residual soil is shorter than that of landfill soil.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.17-28
• /
• 2018

In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon material. Comparison study was also conducted by production of activated carbon from coconut shell (CCNS), Pinus, and Avicel, and each activated carbon was characterized by chemical composition, Raman spectroscopy, SEM analysis, and BET analysis. The amount of solid residue after thermogravimetric analysis of biomass samples at the final temperature of $750^{\circ}C$ was SAL > CCNS > Pinus > Avicel, which was the same as the order of activated carbon yields after catalytic activation. Specifically, SAL-derived activated carbon showed the highest value of carbon content (91.0%) and $I_d/I_g$ peak ratio (4.2), indicating that amorphous large aromatic structure layer was formed with high carbon fixation. In addition, the largest changes was observed in SAL with the maximum BET specific surface area and pore volume of $2341m^2/g$ and $1.270cm^3/g$, respectively. Furthermore, the adsorption test for three kinds of organic pollutants (phenol, 2,4-Dichlorophenoxyacetic acid, and carbofuran) were conducted, and an excellent adsorption capacity more than 90 mg/g for all activated carbon was determined using 100 ppm of the standard solution. Therefore, SAL, a condensed structure, can be used not only as a nanoporous carbon material with high specific surface area but also as a biosorbent applied to a carbon filter for remediation of organic pollutants in future.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.149-157
• /
• 1995

In order to obtain the basic knowledges concerned to the semen preservation of aquacultural fishes, studies on the physical and chemical properties of semen, and sperm motility with the different osmotic pressures making by adding $Na^+,\;K^+,\; Mg^{++},\;and\;Ca^{++}$ to artificial seawater (ASW) were conducted in black seabream, Acanthopagrus schlegeli. Average semen volume per fish in one strip was 1.97ml and sperm concentration was $2.33\pm1.30\times10^{10}$ sperm/ml. Spermatocrit and pH of semen were $90.6\pm5.0\;and\;8.3\pm0.1$, respectively, Osmotic pressures of rearing seawater, seminal fluid and plasma were $939\pm24,382\pm70\;and\;342\pm77$ mOsm/l, and $Na^+,\;K^+$ and $Cl^-$ concentrations of seminal fluid were $169.5\pm4.5,\;4.9\pm2.2,\;156.0\pm2.0\;mM/l$, respectively. When semen were diluted by using $Na^+,\;K^+,\;Mg^{++}\;and\;Ca^{++}$ free ASW, only $Na^+$ free ASW had no sperm motility. As raising osmotic pressure graduary by addition of 1M NaCl to the $Na^+$ free ASW, spermatozoa showed the high motilities in 457-1128 mOsm/l, but the low motilities in 1398-1736 mOsm/l. In the case of same treatments with 1M of KCl, $MgC1_2\;and\;CaC1_2$ to the $K^+,\;Mg^{++}\;and\;Ca^{++}$ free ASW, spermatozoa revealed the high motilities in $904\~1434,\;818\~1175\;and\;956\~1343$ mOsm/l, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.233-238
• /
• 2012

We prepared sponge cakes consisting of 1.5%, 3%, 4.5%, or 6% Omija powder. The specific gravity and viscosity of sponge cake batter were measured. Also, the moisture content, color, volume index, weight and texture of the sponge cake were determined. Consumer preference tests of the sponge cakes were also conducted. The viscosity of cake batter tended to decrease as the ratio of Omija powder increased. The specific gravity of the control batter was 0.41, and there was no significant difference between the control and the cakes baked with 1.5%, 3%, 4.5%, and 6% Omija powder. The moisture content and weight of the cakes were not significantly different between the control and those made with Omija powder. Hunter 'L,', 'a,' and 'b' values of the crust decreased significantly as the amount of Omija powder in the cake increased. Hunter 'L' and 'b' values of the crumbs were low in the cakes with Omija powder, while 'a' values were high. Hardness and fracturability did not show any differences between the cakes. Adhesiveness and resilience of the control were high. The control sample showed the highest sensory score in overall preference. However, cakes made with 1.5% Omija powder obtained the highest values in color, softness, and flavor scores. Omija powder flavor and astringency scores increased as the amount of Omija powder increased, and sweetness did not show any differences among cakes. Intensity scores of egg flavors significantly decreased as the amount of Omija powder increased. Sensory scores of off-flavor significantly increased as the amount of Omija powder increased. Based on the results, 1.5~3% should be recommended as the optimum level of Omija powder to be added for the preparation of sponge cake.

• Progress in Medical Physics
• /
• v.25 no.1
• /
• pp.46-52
• /
• 2014

Liquid ionization chamber is filled with liquid equivalent material unlike air filled ionization chamber. The high density material allow very small-volume chamber to be constructed that still have a sufficiently high sensitivity. However liquid ionization chamber should be considered for both initial recombination and general recombination. We, therefore, studied using the Co-60 beam as the continuous beam and the microLion chamber (PTW) for comparing the ion collection efficiency by Greening theory, two-dose rate method and our experiment method. The measurements were carried out using Theratron 780 as the cobalt machine and water phantom and 0.6 cc Farmer type ionization chamber was used with microLion chamber in same condition for measuring the charge of microLion chamber according to the dose rates. Dose rate was in 0.125~0.746 Gy/min and voltages applied to the microLion chamber were +400, +600 and +800 V. As the result, the collection efficiency by three method was generally less than 1%. In particular, our experimental collection efficiency was in good agreement within 0.3% with Greening theory except the lowest two dose rates. The collection efficiency by two-dose rate method also agreed with Greening theory generally less than 1%, but the difference was about 4% when the difference of two dose rates were lower. The ion recombination correction factors by Greening theory, two-dose rate method and our experiment were 1.0233, 1.0239 and 1.0316, respectively, in SSD 80 cm, depth 5 cm recommended by TRS-398 protocol. Therefore we confirmed that the loss by ion recombination was about 3% in this condition. We think that our experiment method for ion recombination correction will be useful tool for radiation dosimetry in continuous beam.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.5
• /
• pp.257-262
• /
• 2006

Purpose: The standard protocol using large volume of oral contrast media may cause gastrointestinal discomfort and contrast-related artifacts in PET/CT. The aim of this study was to evaluate the usefulness of low dose oral contrast in $^{18}F-FDG$ PET/CT. Materials and Methods: We retrospectively reviewed the whole-body PET/CT images in a total of 435 patients. About 200 ml of oval contrast agent (barium sulfate) was administered immediately before injection of $^{18}F-FDG$. The FDG uptake of intestines was analyzed by visual and semi- quantitative method on transaxial, coronal and saggital planes. Results: Seventy (16%, 113 sites) of 435 images showed high FDG uptake (peak SUV > 4); 50 (74%, 84 sites) with diffuse and 20 (15%, 29 sites) with focal uptake. The most commonly delivered site of oral contrast media was small bowel (n=27, 39%). On PET/CT images, FDG uptake coexisted with oral contrast media in 26 patients (54%, 38 sites) with diffuse pattern and 9 (45%, 9 sites) with focal pattern, and by sites, those were 38 (45%) and 9 (31%), respectively. In small bowel regions, the proportion of coexistence reached as high as 61% (29/47 sites). A visual analysis of available non-attenuation corrected PET images of 27 matched regions revealed no contrast-related artifact. Conclusion: We concluded that the application of low dose contrast media could be helpful in the evaluation of abdominal uptake in the FDG PET/CT image.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.205-209
• /
• 2018

'Saemimyeon,' a Tongil-type rice variety (Indica x Japonica), containing high amylose content, is suitable for rice noodle production. Currently, the major parts of the rice processing industry that include products such as rice flour and noodles are expected to partially replace the wheat flour market. The volume of the rice noodle market is growing and can contribute to the rice surplus problems and farmer's income. This study was carried out to promote productivity of 'Saemimyeon' by finding the most suitable transplanting times in Youngnam Province. The transplanting times were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$, and June $14^{th}$ and the planting distance was $30{\times}12cm$. The field experiment was conducted in the Miryang region (southern plain region of Korea) from 2015 to 2017. Our results suggested that the optimum transplanting dates were from May $17^{th}$ to May $31^{th}$, which resulted in an average yield of 750 kg/10 a. The average grain filling rate before May $31^{th}$ was more than 83% and it declined to 75% after June $7^{th}$. The average temperature range from heading to harvesting time was $21{\sim}25^{\circ}C$ and the estimated optimal temperature was $24^{\circ}C$, which is similar to that of May $24^{th}$ by regression equation. It is suggested that low temperature at seed maturation time caused the lower grain filling rate, and therefore 'Saemimyeon' needed to be transplanted before May $31^{th}$ for higher productivity. Estimated optimal transplanting time based on temperature was 1 ~ 2 weeks earlier than the optimum transplanting time for common japonica rice cultivars in Youngnam Province.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2001

The crystal structure of biotite-1M from Bancroft, Ontario, was determined by Rietveld refinement method using high-resolution neutron powder diffraction data at -26.3$^{\circ}C$, 2$0^{\circ}C$, 30$0^{\circ}C$, $600^{\circ}C$, 90$0^{\circ}C$. The crystal structure has been refined to a R sub(B) of 5.06%-11.9% and S (Goodness of fitness) of 2.97-3.94. The expansion rate of a, b, c unit cell dimensions with elevated temperature linearly increase to $600^{\circ}C$. The expansivity of the c dimension is $1.61{\times}10^{40}C^{-1}$, while $2.73{\times}10^{50}C^{-1}$ and $5.71{\times}10^{-50}C^{-1}$ for the a and b dimensions, respectively. Thus, the volume increase of the unit cell is dominated by expansion of the c axis as increasing temperature. In contrast to the trend, the expansivity of the dimensions is decreased at 90$0^{\circ}C$. It may be attributed to a change in cation size caused by dehydroxylation-oxidation of $Fe^{2+}$ to $Fe^{3+}$ in vacuum condition at such high temperature. The position of H-proton was determined by the refinement of diffraction pattern at low temperature (-2.63$^{\circ}C$). The position is 0.9103${\AA}$ from the O sub(4) location and located at atomic coordinates (x/a=0.138, y/b=0.5, z/c=0.305) with the OH vector almost normal to plane (001). According to the increase of the temperature, $\alpha$* (tetrahedral rotation angle), $t_{oct}$ (octahedral sheet thickness), mean distance increase except 90$0^{\circ}C$ data. But the trend is less clearly relative to unit cell dimension expansion because the expansion is dominant to the interlayer. Also, ${\Psi}$ (octahedral flattening angle) shows no trends as increasing temperature and it may be because the octahedron (M1, M2) is substituted by Mg and Fe.