• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.906-914
• /
• 1994

Plastic behavior of two-phase intermetallic compounds based on $LI_{2}$-type $(Al, Cr)_3$ Ti was investigated using compression test at R.T. and 77K. $LI_{2}$ single phase alloys and two-phase alloys consisting of mainly $LI_{2}$ phase and a few or 20% second phases were selected from AI-Ti-Cr phase diagram. In general, compared with Llz single phase, two-phase alloys consisting of 20% second phase showed relatively high yield strength and poor ductility. Among the alloys, however, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ phase showed available ductility as well as high yield strength. Plastic behavior of $LI_{2}$ single phase alloys and two-phase alloys consisting of a few% $Cr_{2}Al$ was also investigated. Homogenization of arc melted ingots substantially reduced the amount of second phases but introduced extensive pore. When Cr content increased in $Ll_{2}$ single phase alloys after the homogenization, the volume fraction of pore in the alloys decreased, and no residual pore was observed in two-phase alloys consisting of a few% $Cr_{2}Al$ phase. Environmental effect on the ductility of the alloys was investigated using compression test at different strain rates($1.2 \times 10^{-4}/s$ and $1.2 \times 10^{-2}/s$). Environmental embrittlement was least significant in A1-25Ti-10Cr alloy consisting of LIZ single phase among the alloys tested in this study. However, based on the combined estimation of the pore formation, environmental embrittlement and ingot cast structure, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ as the second phase is expected to show the best tensile elongation behavior.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.63-65
• /
• 2001

The Chosen Supergroup (Cambro-Ordovician), mid-east Korea consists mainly of shallow marine carbonates and contains a variety of limestone conglomerates. These conglomerates largely comprise oligomictic, rounded lime-mudstone clasts of various size and shape (equant, oval, discoidal, tabular, and irregular) and dolomitic shale matrices. Most clasts are characterized by jigsaw-fit (mosaic), disorganized, or edgewise fabric and autoclastic lithology. Each conglomerate layer is commonly interbedded with limestone-dolomitic shale couplets and occasionally underlain by fractured limestone layer, capped by calcareous shale. According to composition, characteristic sedimentary structures, and fabric, limestone conglomerates in the Hwajol, Tumugol, Makkol, and Mungok formations of Chosen Supergroup can be classified into 4 types: (1) disorganized polymictic conglomerate (Cd), (2) horizontally stratified polymictic conglomerate (Cs), (3) mosaic conglomerate (Cm), and (4) disorganized/edgewise oligomictic conglomerate (Cd/e). These conglomerates are either depositional (Cd and Cs) or diagenetic (Cm and Cd/e) in origin. Depositional conglomerates are interpreted as storm deposits, tidal channel fills, or transgressive lag deposits. On the other hand, diagenetic conglomerates are not deposited by normal sedimentary processes, but formed by post-depositional diagenetic processes. Diagenetic conglomerates in the Chosen Supergroup are characterized by autoclastic and oligomictic lithology of lime-mudstone clasts, jigsaw-fit (mosaic) fabric, edgewise fabric, and a gradual transition from the underlying bed (Table 1). Autoclastic and oligomictic lithologies may be indicative of subsurface brecciation (fragmentation). Consolidation of lime-mudstone clasts pre-requisite for brecciation may result from dissolution and reprecipitation of CaCO3 by degradation of organic matter during burial. Jigsaw-fit fabric has been considered as evidence for in situ fragmentation. The edgewise fabric is most likely formed by expulsion of pore fluid during compaction. The lower boundary of intraformational conglomerates of depositional origin is commonly sharp and erosional. In contrast, diagenetic conglomerate layers mostly show a gradual transition from the underlying unit, which is indicative of progressive fragmentation upward (Fig. 1). The underlying fractured limestone layer also shows evidence for in situ fragmentation such as jigsaw-fit fabric and the same lithology as the overlying conglomerate layer (Fig, 1). Evidence from the conglomerate beds in the Chosen Supergroup suggests that diagenetic conglomerates are formed by in situ subsurface fragmentation of limestone layers and rounding of the fragments. In situ subsurface fragmentation may be primarily due to compaction, dewatering (upward-moving pore fluids), and dissolution, accompanying volume reduction. This process commonly occurs under the conditions of (1) alternating layers of carbonate-rich and carbonate-poor sediments and (B) early differential cementation of carbonate-rich layers. Differential cementation commonly takes place between alternating beds of carbonate-rich and clay-rich layers, because high carbonate content promotes cementation, whereas clay inhibits cementation. After deposition of alternating beds and differential cementation, with progressive burial, upward-moving pore fluid may raise pore-pressure in the upper part of limestone layers, due to commonly overlying impermeable shale layers (or beds). The high pore-pressure may reinforce propagation of fragmentation and cause upward-expulsion of pore fluid which probably produces edgewise fabric of tabular clasts. The fluidized flow then extends laterally, causing reorientation and further rounding of clasts. This process is analogous to that of autobrecciation, which can be analogously termed autoconglomeration. This is a fragmentation and rounding process whereby earlier semiconsolidated portions of limestone are incorporated into still fluid portions. The rounding may be due mainly to immiscibility and surface tension of lime-mud. The progressive rounding of the fragmented clasts probably results from grain attrition by fluidized flow. A synthetic study of limestone conglomerate beds in the Chosen Supergroup suggests that very small percent of the conglomerate layers are of depositional origin, whereas the rest, more than $80\%$, are of diagenetic origin. The common occurrence of diagenetic conglomerates warrants further study on limestone conglomerates elsewhere in the world.

• The Korean Journal of Physiology
• /
• v.8 no.2
• /
• pp.19-31
• /
• 1974

In oder to study the correlation between daily urinary output of sodium chloride and blood pressure, twenty four hour urine samples were collected from 224 cases (70 male and 154 female) of healthy Koreans whose age varied from 18 to 70 years old. The volume and concentration of sodium, chloride and potassium and total nitrogen were measured, along with the resting blood pressure. Results obtained are summarized as follows; 1. Daily urinary output was increased as a function of age. However, daily urinary output per unit sulface area was maintained at approximately 800 to 900 $ml/m^2$ in all age groups of male and it increased as a function of age in female groups. There was no significant difference between male and female. 2. The daily urinary sodium concentration was decreased gradually acceding to age in both sexes. Daily excretion of sodium was constant regardless of age in both sexes but especially high in 25-39 year female age group, which was slightly greater in males than in females. 3. The daily urinary chloride concentration was at approximately 250 meq/L in all age groups of male and which decreased as a function of age in females. 4. Hence the daily urinary output of sodium chloride was constant in all age groups of males which increased as a function of age in female groups. However, daily excretion of sodium chloride per unit sulface area was maintained at approximately 11 $gm/m^2$ in males and which increased as a function of age in females. 5. The daily urinary excretion of potassium was constant regardless of age in both sexes. 6. Urinary K/Na ratio was maintained at approximately 0.27 in males and 0.33 in females. 7. The daily urinary output of total nitrogen amount was approximately $8{\sim}10$ gm in males and $7{\sim}9$ gm in females. However, daily urinary output of nitrogen per unit sulface area was constant regardless of age in both sexes. 8. The systolic blood pressure was increased gradually according to the age in both sexes and was higher for males than females under 40 years of age. However, there was no significant difference between both sexes in ages over 40 years. 9. Quantitative comparisons indicated that daily urinary output and sodium chloride excretion are higher while daily potassium output, nitrogen excretion and urinary K/Na ratio are significantly lower among Koreans than a among Occidentals. These findings suggest that average Koreans live on low-protein and high-salt diet throughout their livers. Statistical result obtained may he summarized as follows; 10. The relation between blood pressure and sodium concentration of urine. The correlation between systolic blood pressure and sodium concentration was negatively associated for both sexes and the correlation coefficient was significant for females $({\gamma}_1=-.19<-{\gamma}_{152},\;_{0.05}=-0.159)$ and it was not significant for males $({\gamma}_1=-.19>-{\gamma}_{68},\;_{0.05}=-0.232)$ tut may be due to the sample size for males. The correlation between diastolic blood Pressure and sodium concentration was negatively associated for both sexes and the correlation coefficient was significant for males $({\gamma}_1=-.37<-{\gamma}_{68},\;0.05=-0.232)$ and the relation was not significant for females $({\gamma}_1=-.11>-{\gamma}_{152},\;_{0.05}=-0.159)$. 11. The relation between blood pressure and daily urinary sodium chloride excretion. The association between systolic blood pressure and sodium chloride excretion was positively correlated for both sexes and the relation was significant for females $({\gamma}_1=.20>{\gamma}_{152},\;_{0.05}= 0.159)$ and it was insignificant for males $({\gamma}_1=.09<{\gamma}_{68},\;_{0.05}=0.232)$, The relation between diastolic blood pressure and sodium chloride excretion was positively associated and insignificant for both sexes males $({\gamma}_1=.17<{\gamma}_{68},\;_{0.05}=0.232)$ and females $({\gamma}_1=.09<{\gamma}_{152},\;_{0.05}=0. 159)$. 12. The relation between daily urinary nitrogen excretion and sodium chloride excretion. The association between daily nitrogen excretion and sodium chloride excretion was positively significant for both sexes, males $({\gamma}_1=.31>{\gamma}\;_{68},\;_{0.05}=0.232)$ and females $({\gamma}_1=.36>{\gamma}_{-152},\;_{0.05}=0.159)$.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.13-19
• /
• 2008

This experiment was carried out to examine physiological and cultural characteristics of two strains ASI 19003, 'Poplar field-cap mushroom' Agrocybe cylindracea, and ASI 19016, 'Chaxingo' A. chaxingu, at the bottle cultivation which have very similar morphological characteristics in genus Agrocybe. There was significant difference between the physiological and cultural characteristics of ASI19003 and ASI19016. The optimal temperature for the hyphal growth was $28^{\circ}C$ in the strain ASI19003 and $30^{\circ}C$ in ASI19016. The optimal pH was not different in two strains and these strains grew well at pH 5.5~7.0. But the optimal pH in the submerged culture was 5.5 in ASI19003 and 5.0 in ASI19016. Especially, hyphal growth of the strain ASI19016 was very poor at pH 6.0~7.3. The optimal carbon source for the growth was lactose in the strain ASI19003 and fructose in ASI19016, and nitrate sources were asparagine, alanine, and glycine in the strain ASI19003, and ammonium tartrate, asparagine, glycine, and alanine in ASI19016, respectively. The periods of incubation and fruiting body formation in the bottle cultivation during the spring were 27 and 13 days in the strain ASI19003, 29 and 17 days in ASI19016. The yields of fruit body were 114 g per bottle (850 $m{\ell}$ volume) in the strain ASI19003 and 100 g in ASI19016. In the summer, the periods of hyphal incubation and fruiting body formation were 29 and 11 days in the strain ASI19003, 30 and 12 days in ASI19016. The color of the cap in the ASI19003 strain according to temperature increase during the fruit body development become more pale, but the strain ASI19016 kept dark color relative to ASI19003. The fruiting body formation of the strain ASI19016 was faster than that of ASI19003. Accordingly, the cultivation of A. cylindracea ASI19003 during the spring, fall and winter, and A. chaxingu ASI19016 during the summer can keep high quality and stable supply all year round of these mushrooms.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.424-431
• /
• 2013

Consumption of waxy corn is steadily increasing due to consumer preference for natural food. However, availability of waxy corn is limited because most of them are used for steamed waxy corn. It is therefore important to create new demands of waxy corn using food processing technology. There is little prior research about characteristics of milled kernel in waxy corn. This study examined the physicochemical and cooking properties of milled kernel using nine waxy corn hybrids. Colored hybrids (Heukjinju, Miheukchal, and Eolrukchal1) showed high milling yield and low change of grain length after milling process compared to other hybrids. The total starch content ranged from 62.1 to 68.4% and the gelatinization temperature of starch was lowest in Yeonnong1 ($69.9^{\circ}C$). The breakdown viscosity of Yeonnong1, Miheukchal and Heukjinju was higher than those of tested hybrids, whereas setback viscosity of those hybrids was lower. In cooking properties of milled waxy corn, water absorption and volume expansion rate were high in Yeonnong2 (84.9, 219.3%), Miheukchal (85.9, 211.4%), and Heukjinju (80.9, 203.7%). In the sensory test, the overall preference was significantly higher in Heukjinju and Miheukchal. Thus, Heukjinju, Yeonnong2, and Miheukchal showed good scores in milling yield, cooking properties, and the preference of sensory test. These results will provide fundamental information to extend milled waxy corns usage.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.257-258
• /
• 2004

The dose from radionuclides released from high-level radioactive waste (HLW) glasses as they corrode must be taken into account when assessing the performance of a disposal system. In the performance assessment (PA) calculations conducted for the proposed Yucca Mountain, Nevada, disposal system, the release of radionuclides is conservatively assumed to occur at the same rate the glass matrix dissolves. A simple model was developed to calculate the glass dissolution rate of HLW glasses in these PA calculations [1]. For the PA calculations that were conducted for Site Recommendation, it was necessary to identify ranges of parameter values that bounded the dissolution rates of the wide range of HLW glass compositions that will be disposed. The values and ranges of the model parameters for the pH and temperature dependencies were extracted from the results of SPFT, static leach tests, and Soxhlet tests available in the literature. Static leach tests were conducted with a range of glass compositions to measure values for the glass composition parameter. The glass dissolution rate depends on temperature, pH, and the compositions of the glass and solution, The dissolution rate is calculated using Eq. 1: $rate{\;}={\;}k_{o}10^{(ph){\eta})}{\cdot}e^{(-Ea/RT)}{\cdot}(1-Q/K){\;}+{\;}k_{long}$ where $k_{0},\;{\eta}$ and Eaare the parameters for glass composition, pH, $\eta$ and temperature dependence, respectively, and R is the gas constant. The term (1-Q/K) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_{0},\;{\eta}\;and\;E_{a}$ are the parameters for glass composition, pH, and temperature dependence, respectively, and R is the gas constant. The term (1-Q/C) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_0$, and Ea are determined under test conditions where the value of Q is maintained near zero, so that the value of the affinity term remains near 1. The dissolution rate under conditions in which the value of the affinity term is near 1 is referred to as the forward rate. This is the highest dissolution rate that can occur at a particular pH and temperature. The value of the parameter K is determined from experiments in which the value of the ion activity product approaches the value of K. This results in a decrease in the value of the affinity term and the dissolution rate. The highly dilute solutions required to measure the forward rate and extract values for $k_0$, $\eta$, and Ea can be maintained by conducting dynamic tests in which the test solution is removed from the reaction cell and replaced with fresh solution. In the single-pass flow-through (PFT) test method, this is done by continuously pumping the test solution through the reaction cell. Alternatively, static tests can be conducted with sufficient solution volume that the solution concentrations of dissolved glass components do not increase significantly during the test. Both the SPFT and static tests can ve conducted for a wide range of pH values and temperatures. Both static and SPFt tests have short-comings. the SPFT test requires analysis of several solutions (typically 6-10) at each of several flow rates to determine the glass dissolution rate at each pH and temperature. As will be shown, the rate measured in an SPFt test depends on the solution flow rate. The solutions in static tests will eventually become concentrated enough to affect the dissolution rate. In both the SPFt and static test methods. a compromise is required between the need to minimize the effects of dissolved components on the dissolution rate and the need to attain solution concentrations that are high enough to analyze. In the paper, we compare the results of static leach tests and SPFT tests conducted with simple 5-component glass to confirm the equivalence of SPFT tests and static tests conducted with pH buffer solutions. Tests were conducted over the range pH values that are most relevant for waste glass disssolution in a disposal system. The glass and temperature used in the tests were selected to allow direct comparison with SPFT tests conducted previously. The ability to measure parameter values with more than one test method and an understanding of how the rate measured in each test is affected by various test parameters provides added confidence to the measured values. The dissolution rate of a simple 5-component glass was measured at pH values of 6.2, 8.3, and 9.6 and $70^{\circ}C$ using static tests and single-pass flow-through (SPFT) tests. Similar rates were measured with the two methods. However, the measured rates are about 10X higher than the rates measured previously for a glass having the same composition using an SPFT test method. Differences are attributed to effects of the solution flow rate on the glass dissolution reate and how the specific surface area of crushed glass is estimated. This comparison indicates the need to standardize the SPFT test procedure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.

• Korean Journal of Poultry Science
• /
• v.13 no.1
• /
• pp.41-48
• /
• 1986

In order to investigate the storage period of packed chicken meat in relation to the bacterial contamination of each processing part, a special grade poultry processing plant located at Dongdoochun-City, Gyeonggi-Do, was surveyed mainly in point of sanitary conditions. The results are summarized as follows. 1. processing room near reception and packing room next to shipping area showed the highest bacterial counts in air. 2. Equipments and instruments for slaughtering also showed a high degree of bacterial contamination even before the operation. This finding suggested that the possibility of the bacterial contamination of carcasses through equipments and instruments would be high, if the continuous sanitary control measures are not properly taken. 3. The bacterial count of scalding water was 3${\times}$10$\^$7/ for standard plate count and 4${\times}$10$\^$5/ for most probable number of coliform bacteria at 1 hour after the start of operation. These values were maintained until the completion of processing. 4. At the ending of chilling process, the bacterial counts of chilling water were 3.3 ${\times}$10$^4$ and 3.0${\times}$10$^3$for standard plate count, when the volume of water used per bird were 21 and 51, respectively. Bacterial contamination was further decreased about 10$\^$-3/-10$\^$-4/ times as the effective chlorine concentration in chilling water was maintained about 50 ppm. 5. An average standard plate count of the residual water In abdominal cavity of carcasses was 3.9${\times}$10$^4$immediate after chilling, however, it increased to 4.7${\times}$10$\^$7/ when the carcasses were packed and stored for 10 days at 4$^{\circ}C$. off-odour development was observed as the bacterial count was not less than 10$\^$6//$m\ell$ of the residual water of the packed carcasses. Data indicated that if the standard plate count of the residual water in abdominal cavity of carcasses was not less than l0$^4$immediate after chilling, the packed chicken meat would not be stored longer than 5 days at 4$^{\circ}C$.