• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.675-687
• /
• 2019

In recent years, the needs for double deck-tunnels have increased in large cities due to the increase in traffic volume and high land compensation costs. In Korea, a network type tunnel which is smaller than general road tunnels and crosses another tunnel underground is planned. In the shield tunnel joints between the existing shield tunnel and the box-type enlargement section, a partial steel-concrete joint is proposed where the bending moment is large instead of the existing full-section steel joint. In order to analysis the enlargement section of the shield tunnel diverged section to reflect the three-dimensional effect, the two-dimensional analysis model is considered to consider the column effect and the stiffness effect of the longitudinal member. A two-dimensional analysis method is proposed to reflect the stiffness of the longitudinal member and the column effect of the longitudinal point by considering the rigidity of the longitudinal member as the elastic spring point of the connecting part in the lateral model. As a result of the analysis of the model using the longitudinal member, it was considered that the structural safety of the partial steel-concrete joint can be secured by reducing the bending moment of the joint and the box member by introducing the longitudinal member having the stiffness equal to or greater than a certain value.

• Composites Research
• /
• v.32 no.5
• /
• pp.284-289
• /
• 2019

In the present paper, the dynamic force-moment equilibrium equations, driving power and energy equations are analyzed to formulate the equation for fuel economy(km/liter) equivalent to the driving distance (km) divided by the fuel volume (liter) of the vehicle, a selected model of gasoline powered KIA K3 (1.6v). In addition, the effects of the dynamic parameters such as speed of vehicle (V), vehicle total weight(M), rolling resistance ($C_r$) between tires and road surface, inclined angle of road (${\theta}$), as well as the aerodynamic parameters such as drag coefficient ($C_d$) of vehicle, air density(${\rho}$), cross-sectional area (A) of vehicle, wind speed ($V_w$) have been analyzed. And the possibility of alternative materials such as lightweight metal alloys, fiber reinforced plastic composite materials to replace the conventional steel and casting iron materials and to reduce the weight of the vehicle has been investigated by Ashby's material index method. Through studies, the following results were obtained. The most influencing parameters on the fuel economy at high speed zone (100 km/h) were V, the aerodynamic parameters such as $C_d$, A, ${\rho}$, and $C_r$ and M. While at low speed zone (60 km/h), they are, in magnitude order, dynamic parameters such as V, M, $C_r$ and aerodynamic ones such as $C_d$, A, and ${\rho}$, respectively.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.272-278
• /
• 2018

Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.

• Journal of Science Education
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2021

In this study, we analyzed the relationship between the physical science domain of TIMSS 2019 and the Korean science curriculum. Twelve subjects are presented in the physical science domain of the TIMSS 2019 4th grade evaluation framework. Research group consisting of elementary and middle school teachers and science education experts, a total of 12, participated to analyze in which grade these subjects were included in the Korea 2009 revised and 2015 revised science curriculum. As a results of analyzing whether the achievement standards of the TIMSS 2019 evaluation framework and Korean science curriculum are consistent, the subjects pertinent to chemistry like 'chemical changes in everyday life,' 'heat transfer,' and 'electricity and simple electrical circuits' appeared not covered at all until the 4th grade curriculum in Korea. Given that the TIMSS 2019 evaluation framework is an international achievement standard, we are proposing to improve the Korean curriculum as follows: first, for the development of the next science curriculum, there is a need for science curriculum organized from the 1st grade of elementary school to connect the content and scope of chemistry in elementary, middle, and high schools as a whole including the Nuri curriculum. Second, as an alternative to the problem of suitability of learning volume and level of learning, it is possible to think of a method to readjust the grade of dealing with related concepts by lowering the difficulty or simplifying the concept. Third, it is necessary to discuss about introducing essential concepts and standard terms into Korea science curriculum according to international trends.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.461-467
• /
• 2020

The aim of this study was to utilize Kozak's stem taper model to develop both a stem taper equation and a stem volume table for Criptomeria japonica, a tree species distributed across Korea. A total of 1,000 sample trees were cut and collected across the country to measure their diameters by stem height. The equation was then used to estimate examine their stem shapes. Our results show that the Fitness Index for the equation was 98.7%, the Mean Absolute Deviation (MAD) was -0.0142, and the MAD was 1.1640, thus indicating a high level of fitness. A statistically significant difference (p < 0.05) was also found from the analysis of discrepancies between a current table and the new table used in this study. It is therefore suggested that the new table-with data from actual stands-will contribute to enhancing the accuracy of national and municipal forest statistics and reducing losses caused by imprecise data on available forest resources.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.899-906
• /
• 2020

The WSS lateral examination is important for diagnosing spinal disorders. Recently, long-length detectors for large-area diagnose have been popularized to effectively reduce the exposure dose and examination time. It can be applied very efficiently to examinations of patients with high risk of falls, children, and adolescents. However, since the image is acquired through a single irradiation, the volume of cervical vertebra is relatively smaller than the lumbar due to the geometrical anatomy of the spine. Therefore, this study intends to fabricate an additional filter using 3D printing technology and copper filament to obtain uniform image quality in the WSS lateral examination and to analyze the results. 3D printing technology is able to easily print a desired shape, so it is widely used in the entire industrial field, and recently, a copper filament has been developed to confirm the possibility as an additional filter. In the WSS lateral examination, CNR and SNR were excellently measured when the additional filter was applied, confirming the possibility of using the additional filter.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.151-160
• /
• 2021

The purpose of this study is to classify online shopping malls into total transaction amount and transaction amount by product, and compare them to find synchronism. The data used in this study were collected from KOSIS for Food Services, Home Appliances·Electronics·Communication devices, Food & Beverages, House_Goods, Clothing, Computers & Peripheral Devices. The analysis period is a total of 44 monthly data from January 2017 to August 2020. In descriptive statistics, variability is relatively very stable in the case of food service, but is large in the case of clothing. In the correlation analysis, the total transaction amount shows a certain level of correlation with each product. In the analysis of the increase rate, Food Service increased by 1,039%, Home Appliances·Electronics·Communication devices increased by 325%, Food & Beverages increased by 296% and House Goods by 250%, but Clothing decreased slightly to 92.56%. In the Scatter Charts analysis, the distribution of Total transaction amount & House Goods, Total transaction amount & Home Appliances·Electronics·Communication devices is generally upward, showing a high level of synchronization. Due to Corona 19, we will have to continue our efforts to provide speed, stability, convenience and various services in preparation for the increase in transaction volume of online shopping malls.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.375-388
• /
• 2021

This paper aims to help prevent the spread of COVID-19 by analyzing confirmed cases of COVID-19 in Daejeon. A high volume of visitors, downtown areas, and psychological fatigue with prolonged social distancing were considered as risk factors associated with the spread of COVID-19. We considered the weekly confirmed cases in each administrative district as a response variable. Explanatory variables were the number of passengers getting off at a bus station in each administrative district and the elapsed time since the Korean government had imposed distancing in daily life. We employed a mixed-effects zero-inflated Poisson regression model because the number of cases was repeatedly measured with excess zero-count data. We conducted k-means clustering to identify three groups of administrative districts having different characteristics in terms of the number of bars, the population size, and the distance to the closest college. Considering that the number of confirmed cases might vary depending on districts' characteristics, the clustering information was incorporated as a categorical explanatory variable. We found that Covid-19 was more prevalent as population size increased and a district is downtown. As the number of passengers getting off at a downtown district increased, the confirmed cases significantly increased.