• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.4
• /
• pp.87-94
• /
• 1994

The aim of the work descrihed in this paper is to study a characteristics of an unsaturated soil for the different matric suctions. To this end, a series of suction controlled isotropic and triaxial compression tests is conducted on silty sands. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. Total volume change, air and water volume changes are measured by the device made for the experiment. The specimens are compacted using a half of Proctor compaction energy and with the water contents of 5% drier than the optimum moisture contents. Isotropic compression and triaxial compression tests are conducted on the specimen at each equilibrium state of matric suction. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated.

• Korean Management Science Review
• /
• v.7 no.2
• /
• pp.58-76
• /
• 1990

Flexibility, in the context of manufacturing, refers to an ability to accommodate changes in market requirements in terms of product, process, and other services in a timely manner at a reasonable cost. The basic purpose of this paper is to analyze manufacturing strategies of leading Korean manufacturers in order to answer the following questions : How important are manufacturing flexibilities to Korean companies in restoring their once competitive cost-based strategies and adopting new variety-based strategies\ulcorner How effectively are Korean companies competing with their foreign competitors, like the US and European companies in terms of manufacturing flexibilities\ulcorner And in order to improve the flexibilities what kinds of manufacturing capabilities are considered as important key factors by Korean manufacturers and are their action programs effectively implemented to acquire these capabilities\ulcorner Major findings of the analysis indicate that Korean companies are very eager to reorganize their high-volume, cost-based corporate strategies as low volume, variety-based strategies. However, Korean manufacturers are still much dependent on the large size high volume factories and / or 'focus factories'. And the action programs and technologies to improve manufacturing flexibilities have been actively implemented at a higher rate than those of their foreign counterparts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.3
• /
• pp.302-310
• /
• 1997

In this paper, we find a method to improve ignitability using methanol which is prospective as an alternative fuel. The constant volume combuster is divided into main chamber and sub-cham¬ber. These two chambers are linked by an adapter which is shaped like a cup. We also compare CDI to HIS that is revised in our laboratory for making a scrutiny into the effects of ignition char¬acteristics. Besides, we analyze a flame propagation process in the main and sub-chamber through taking pictures 10, 000 frames per second by high speed camera at the state being fabricated quartz glass aside main and sub-chamber.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1718-1722
• /
• 2008

This study explores the influence of volume fraction of nanocrystals of Cu-Zr amorphous alloys on shear band formation. As the number of crystals with very tiny size increases, the strain localization, i.e. shear band, decreases without large drop of flow stress. The DPRs also depict no sudden drop and relatively high values. The strain state during the deformation represents a few shear bands at low volume fraction while there are no distinguishable shear bands at high volume fraction of nanocrystals.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.129-133
• /
• 2000

환경대기중 입자상물질의 검사방법은 환경부고시 97-98호(97. 11. 5)에 의거 고용량공기포집법(high volume air sampler), 저용량공기포집법(low volume ai sampler), 광산란법 및 광투과법 그리고 $\beta$흡수법 등으로 되어 있다. 이중 고용량공기포집법, 저용량공기포집법, $\beta$흡수법등은 중량법의 범주에 드는 측정법으로 되어 있다. 이들 방법 중 먼지채취전후의 무게를 직접 칭량하여 분석하는 고용량공기포집법은 총부유먼지의 측정법으로, 저용량공기포집법은 $PM_{10}$의 분석에 이용되는 것이며 $PM_{10}$ 고용량공기포집기($PM_{10}$ high volume air sampler) 또는 $PM_{10}$ 분석에 이용될 수 있다. (중략)

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2015

UHPC(Ultra High Performance Concrete) is used widely with its remarkable performance, such as strength, ductility and durability. Since the fibers in the UHPC can control the tensile crack, the punching shear capacity of UHPC is higher than that of the conventional concrete. In this paper, seven slabs with different thickness and fiber volume ratio were tested. The ultimate punching shear strength was increased with the fiber volume ratio up to 1%. The shear capacity of specimens with the fiber content 1% and 1.5% do not have big differences. The thicker slab has higher punching shear strength and lower deformation capacity. The critical sections of punching shear failure were similar regardless of the fiber volume ratio, but it were larger in thicker slab.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.3
• /
• pp.278-285
• /
• 2004

The effects of water, rye flour and vital gluten on the sensory properties of bread were studied by response surface methodology and sensory evaluations. A response surface model was used to evaluate the effects observed and to determine the optimum variations for rye bread. The study included 12 combinations of the following independent variables: Water(57, 62, 67%), Rye flour(0, 10, 30, 50%), and Vital gluten(0, 1, 3, 5%). Bread quality attributes determined were specific volume, color, texture, appearance, taste, chewiness, moisture, overall. Rye bread specific volume, sensory evaluation values and Instrumental testing results were significantly affected by variety (water, rye flour and vital gluten). Rye bread with a high specific volume was produced using water 67%, rye flour 10% and vital gluten 3%. Whereas, rye breads with a high overall sensory evaluation were water 62 %, rye flour 10 % and vital gluten 5%. And Specific volume predicted and overall preference also was shown high. It was shown that the experimental design used provided information about the rye bread of variation of water, rye flour and vital gluten and can be a useful supplement to standardized and optimized formulas in rye bread making. The results suggest that water, rye flour, vital gluten can be combined in rye bread making at various levels, contributing to optimize the functional properties of rye bread. These result represents that breads loaf volume related to directly consumer preference.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.11
• /
• pp.477-482
• /
• 2005

We have investigated volume resistivity and thermal properties showed by changing the content of carbon black which is the component parts of semiconducting shield in underground power transmission cable. Specimens were made of sheet form with the nine of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both 25$\pm$1[$^{\circ}C$] and 90$\pm$1[$^{\circ}C$]. And specific heat (Cp) and thermal conductivity were measured by Nano Flash Diffusivity and DSC (Differential Scanning Calorimetry). The measurement temperature ranges of specific heat using the BSC was from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity using Nano Flash Diffusivity were both 25[$^{\circ}C$] and 55[$^{\circ}C$]. Volume resistivity was high according to an increment of the content of carbon black from these experimental results. And specific heat was decreased, while thermal conductivity was increased by an increment of the content of carbon black. And both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.165-169
• /
• 2008

This study attempts to analyze the relationship between forest volume and age based on 5th NFI data and spectral characteristics of satellite imagery using ASTER sensor in Korea. Forest stand volume and age had the negative correlation with the spectral reflectance in all of the band (Blue, Green, Red, SWIR). With increasing of stand volume and age, spectral reflectance decrease. The spectral reflectance of band1 showed the highest correlation between stand volume and spectral reflectance among the VNIR wavelength. The spectral reflectance band 1, 2 (visible wavelength) and stand age have high correlation compared to other bands. The correlation coefficients between forest volume and vegetation indices have low relationship. This result indicates that the reflectance of blue band may be important factor to improve the potential of optical remote sensing data to estimate forest volume and age.

• Journal of Korea Game Society
• /
• v.9 no.6
• /
• pp.191-196
• /
• 2009

Volume rendering is a method which extracts meaningful information from volume data and visualizes those information. In general, since the size of volume data gets larger, it is very important to devise acceleration methods for interactive rendering speed. Min-max octree is data structure for high-speed volume rendering, however, its creation time becomes long as the data size increases. In this paper, we propose acceleration method of min-max octree generation using CUDA. Firstly, we convert one-dimensional array from volume data using space filling curve. Then we make min-max octree structures from the sequential array and apply them to acceleration of volume ray casting.