• 소성∙가공
• /
• 제24권2호
• /
• pp.83-88
• /
• 2015

For chromaticity correction, it is necessary to dispense high viscosity phosphor slurry since it greatly affects the performance of white LEDs. However, it is quite difficult to dispense high viscosity fluorescent materials. In the current study, micro-discharge electrostatic printing has been used for dispensing various high viscosity phosphor slurries. We have achieved dispersions of up to 50 µg using drop on demand (DOD) discharge experiments. The experiments were conducted with different combinations of process variables such as applied voltage, pneumatic pressure, and frequency.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.124-131
• /
• 2016

Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.

• 청정기술
• /
• 제20권2호
• /
• pp.97-102
• /
• 2014

현재 고효율 백색 발광다이오드(light emitting diode, LED) 구현을 위한 고점도 형광체 토출에 대한 많은 연구가 진행 중이다. 백색 발광다이오드에서 제품성능에 영향을 미칠 수 있어 고점도 형광체의 정량토출은 중요하다. 그러나 기존 연구에서 고점도 형광체 정량토출의 어려움이 있었다. 고점도 형광체의 정량토출을 위해서 본 연구에서는 다양한 점도에서 미세토출이 가능한 정전기력 프린팅 기술을 적용하였다. 전압 변화에 따른 요구 적출형(drop on demand, DOD) 토출 실험을 진행하여 토출 시 노즐의 메니스커스 각도와 토출 도트 직경 사이의 상관관계를 도출하였다. 토출 전압이 증가함에 따라, 토출 메니스커스 각도는 증가하고 토출 도트 직경은 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.391-394
• /
• 1998

Electroluminescence is the light emission obtained by an electrical excitation energy passing through a phosphor under an applied high electrical field. EL are paid much attention on flat panel display as a backlight and indicator, which are divided into ACPRL(alternating-current powder electroluminescent) and ACTFEL(alternating-current powder electroluminescent). In this paper, Electric and emission properties on ACPEL are investigated based on ZnS:Cu phosphor. The basic structure on this is ITO glass/phosphor/insulator/ backelectrode, CR-M which has high efficiency on thermal properties and dielectric Properties was introduced and BaTiO$_3$ as a insulating layer in order to increase app1ied electric field on phosphor. Changing on Dielectric and emission Properties was caused by a different viscosity of binder which filled on space between phosphor particle. 60cd/$m^2$ under 60V, 2kHz sinusoidal was gotten from ACPELD prepared in this work.