• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.89-96
• /
• 2004

Porous concrete is used of various parts by advantage of porous. Example of growing of plant is possible, and dwelling of creature, and filter functions of various contaminant, and decrease of noise, and so on. This research is for porous concretes that were used by four aggregate rubble, refreshing aggregate, expanded clay, orchid stone. This research estimate that physical and mechanical characteristics of fresh concrete and hardened concrete. The purpose of this research is to make environment-friendly porous concrete. This research's conclusion is as following : 1. Porous Concrete's slump was measured 12~14cm with rubble, 12~16cm with refreshing aggregate, 11~13cm with expanded clay, 11~13cm with orchid stone. Weight of aggregate was bigger, slump price appeared by bigger thing. Because placed Porous Concrete is low viscosity and small resistance between aggregate, it estimated that have high workability. 2. Porous Concrete's unit weight was measured 1.71~1.75t/$\textrm{m}^3$ with rubble, 1.58~1.62t/$\textrm{m}^3$ with refreshing aggregate, 1.19~1.20t/$\textrm{m}^3$ with expanded clay, 0.98~1.06t/$\textrm{m}^3$ with orchid stone. Showed aspect such as weight of aggregate. 3. Porous Concrete's compressive strength was measured 76~102kgf/$\textrm{cm}^2$ with rubble, 51~60kgf/$\textrm{cm}^2$ with refreshing aggregate, 30~40kgf/$\textrm{cm}^2$ with expanded clay, 13~16kgf/$\textrm{cm}^2$ with orchid stone. 4. Tendency of tensile strength and bending strength showed generally similarly with compressive strength, but showed low value fewer than 15kgf/$\textrm{cm}^2$ Therefore, wire mesh, reinforcing rod, such as establishment of frame is considered to need in reinforcement about tensility or flexures in case receive tensility or produce product of thin absence form. It concludes by speculating on the consequences of extrapolating the results of study to remodelling the office building being already existence.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.94-100
• /
• 2002

During the last years, great progress has been made in the fields of welding power sources and filler materials for the MIG-welding of magnesium alloys. This advice resulted in a better welding process, md, therefore, in highly improved welding results. Furthermore the gap between short-circuiting- and spray-arc-trunsfer could be closed by the triggered short-circuiting- and the short-circuiting-arc with pulse overlay. A crucial contribution to the welding process is the energy input into the filler material. Many problems result from the physical properties of magnesium, for instance its narrow interval between melting point 600$^{\circ}C$ and vaporization point 1100$^{\circ}C$. The energy input into the filler material has to be regulated in such a way that the wire will melt but not vaporize. For th is reason, special characteristics of power sources hue been examined and optimized with the help of high-speed-photographs of the welding process with particular consideration of the drop detachment. An important improvement of the weld seam profile has been achieved by using filler material of only 1.2 mm in diameter. The experiments hue been made with 2.5 mm thick extruded profiles of AZ31 and AZ6l. The results of tensile testing showed strength values of 80 to 100% of the base metal. B ending angles up to 60$^{\circ}$ have been reached. The fatigue strength under reversed bending of the examined magnesium alloys after welding reaches 50% of the strength of the base metal. When the seam reinforcement is ground of the fatigue strength can be raised up to 75% of the base metal.

• Current Photovoltaic Research
• /
• 제11권2호
• /
• pp.44-48
• /
• 2023

In heterojunction technology (HJT) solar cells, low-temperature curing paste is used because the passivation layer deteriorates at high temperatures of 200℃ or higher. However, manufacturing HJT photovoltaic (PV) modules is challenging due to the weak peel strength between busbar electrodes and cells after soldering process. For this issue, the electrode thicknesses of the busbars of the HJT solar cell were analyzed, and the peel strengths between electrodes and wires were measured after soldering using an infrared (IR) lamp. As a result, the electrodes printed by the screen printing method had a difference in thickness due to screen mask. Also, as the thickness of the electrode increased, the peel strength of the wire increased.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 2009

As a way to improve the safety of automotives and to reduce the weight of vehicles, new forming technologies and advanced materials are in high demand in the automotive industry. However, the advanced strength steel has inferior formability and large springback. In order to overcome such drawbacks, the hot press forming process (HPF) has been being applied for forming of automotive sheet parts. In this work, new equipment was suggested to measure unlimited displacement range compared to previous one which was able to measure only up to 10mm displacement range. The external extensometer connected with grips by wire was applied to equipment so that total strain range was measured up to failure also in high temperature. And the finite element analysis was conducted to characterize the mechanical properties of the HPF steel. Finally, the flow curves were represented by utilizing the Johnson-Cook type equation both in uniform and post-uniform deformation regions.

• 대한의용생체공학회:의공학회지
• /
• 제18권2호
• /
• pp.147-156
• /
• 1997

Various prosthetic heart valves have been developed and used clinically, but they have problems, such as thrombogenecity, hemoltsis, high cost and low durability. New types of trileaflet polymer heart valves have been developed in order to use them as inlet and outlet valves in a ventricular assist device. The aim of this study is to determine the hydrodynamic effectiveness of the newly designed trileaflet polymer valves and their feasibility for temporary use in the blood pumps. Trileaflet polymer valves are made of polyurethane, because of its good blood compatibility, high tonsil strength and good resistance to fatigue. An in vitro experimental investigation was perf'ormed in order to ev91ua1e hydrodynamic performance of the trileaflet polymer valves having different design and fabrication tech- niques. The St. Jude Medical valve (SJMV) and floating-type monoleaflet polymer valve (MLPV) were also tested The pressure drop across the valve, leakage volume, and the flow patterns mere investigated for valves. The result of comparative tests showed that the trileaflet polymer valves had a better hydrodynamic performance than the others. TPV which has two stable membrane shape showed the lowest back flow. The pressure hops of TPVs were lower than that of MLPV, but slightly higher than SJMV. The hydrodynamic performance of valves under the pulastile flow showed the similar results as steady flow. The velocity profiles and turbulent intensities were measured at the distal sites of valves using a hot-film anemometer. Central flow was maintained in trileaflet polymer valves, and the maximum turbulent intensities were lower in TPVs comparing to MLPV.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.65-69
• /
• 2018

Due to large in-field current carrying capacity and strong mechanical strength, a REBCO wire has been regarded as a viable high temperature superconductor (HTS) option for high field MRI and > 1 GHz (>23.5 T) NMR magnets. However, a REBCO magnet is well known to have an inherent problem of field inhomogeneity, so-called 'Screening Current induced magnetic Field (SCF)'. Recently, 'field shaking' and 'current overshoot operation' techniques have been successfully demonstrated to mitigate the SCF and enhance the field homogeneity by experiments. To investigate the effectiveness of current overshooting operation technique, a numerical simulation is conducted for a test REBCO magnet composed of a stack of double pancake coils using '2D edge-element magnetic field formulation' combined with 'domain homogenization' scheme. The simulation result demonstrates that an appropriate amount of current overshoot can negate the SCF. To verify the simulation results, current overshoot experiments are conducted for the REBCO magnet in liquid nitrogen. Experimental results also demonstrate the possible application of current overshoot technique to mitigate the SCF and enhance the field homogeneity.

• Advances in nano research
• /
• 제14권6호
• /
• pp.541-555
• /
• 2023

The extensive use of polymeric matrix composites in the athletic sector may be attributed to its high strength-to-weight ratio, production economy, and a longer lifespan than conventional materials. This study explored the impact of carbon nanotubes on the properties of different composite field sports equipment components. The test specimens were fabricated using the compression molding technique. The insertion of carbon nanotubes increases mechanical properties related to the process parameters to account for an improvement in the stick sections' overall performance. The dynamic response of functionally graded reinforced nanocomposite wire structure is examined in this paper on the bases of high-order hyperbolic beam theory lined to the size-dependent nonclassical nonlocal theory under the external mechanical load due to the physical activities. Finally, the impact of different parameters on the stability of nanocomposite structures is discussed in detail.

• 한국지능시스템학회논문지
• /
• 제15권6호
• /
• pp.709-713
• /
• 2005

고해상도의 항공영상으로부터 3차원 와이어프레임(wire-frame) 구성을 위한 새로운 선소 추출 알고리듬을 제안하였다. 본 연구의 목적은 기존의 방식들의 문제점인 라인 불일치 문제, 에지부분의 Blurring 문제 등을 고려하여 보다 정밀하고 효과적인 선소를 추출하는데 있다. 먼저 항공영상으로부터 에지맵을 추출한 후, 에지 점들의 체인 코드 추적을 수행하고 에지강도와 방향성분을 고려한 선소의 추출을 행하였다. 에지맵의 추출은 Smith가 제안한 SUSAN(Smallest Univalue Segment Assimilating Nucleus) 알고리듬을 이용하였다. 제안한 알고리듬은 다음의 4 단계로 구성된다. 에지 맵의 체인코드 추적 결과에 기반하여 비선소 후보점을 감소시키기 위한 수평/수직/대각 성분 제거, 인접점 제거, 각도 일치점 제거, 선소를 이루는 시작점 및 끝점 검출 등의 과정을 통하여 선소추출을 행하였다. 제안한 알고리듬과 기존의 Boldt 알고리듬을 비교한 결과 제안한 알고리듬이 건물을 이루고 있는 주요 선소를 더욱 충실히 찾아냈고 불필요한 선소는 적게 찾아냄을 확인하였다.

• 한국진공학회지
• /
• 제18권3호
• /
• pp.203-207
• /
• 2009

반도체 공정에서 기존 금속배선으로 사용되던 Al을 대체하여 사용되는 금속배선으로는 Cu가 그 대안으로 인식되고 있다. 이는 비저항값이 Al ($2.66{\mu}{\Omega}$-cm)보다 Cu ($1.67{\mu}{\Omega}$-cm)가 더 작아 RC 지연 시간 (RC delay time)을 극복하기 때문이다. 그러나 Cu의 녹는점은 $1085^{\circ}C$로 높지만 저온에서 쉽게 Si기판과 반응하는 특성을 가지고 있고, 또한 Si과의 접착력이 좋이 않는 것으로 알려져 있다. 이러한 이유로 Cu와 Si과의 반응을 방지하고 접착력을 높이기 위하여 확산방지막의 연구가 꾸준히 진행되고 있다. 본 연구그룹에서는 Cu의 확산을 방지하기 위하여 W-C-N의 확산방지막에 대하여 연구하여 왔다. 지금까지 보고된 연구 결과에 의하면 W-C-N (tungsten-carbon-nitrogen) 확산방지막은 고온에서도 Cu와 Si과의 확산을 효과적으로 방지하는 것으로 보고되었다. 이 논문에서는 W-C-N 확산방지막에 질소(N) 비율을 다르게 증착하여 지금까지 진행한 연구 결과를 기반으로 새로이 Cu의 전자거동현상(Electromigration)에 대하여 연구하였고, 고온 열처리 과정에서 박막의 표면강도 (Surface hardness)를 Nano-Indenter system을 이용하여 연구하였다. 이러한 연구를 통하여 박막내 질소가 포함된 W-C-N 확산방지막이 Cu의 전자거동에 더 안정적이며, 고온 열처리 과정에서도 표면 강도가 더 안정한 연구 결과를 획득하였다.

• 한국안광학회지
• /
• 제12권3호
• /
• pp.55-58
• /
• 2007

티타늄과 그 합금은 경량성, 우수한 기계적 성질 그리고 우수한 내식성 때문에 주요한 안경테 소재로 사용되고 있다. 본 연구에서는 티타늄 합금 홈선에 대하여 안경테 브레이징용으로 사용되고 있는 고주파유도가열 장치를 이용한 열처리 시간의 변화에 따른 경도 및 미세조직의 변화에 대하여 조사하였다. ${\beta}-Ti$ 합금은 고주파유도가열처리 시간의 증가에 따라 경도값의 감소가 나타났으며, 이는 열처리 시간의 증가에 따른 결정립의 조대화 때문인 것으로 생각된다. Ti-325 합금의 고주파유도가열처리에서는 2초까지는 경도값이 감소하였으나, 3초에서는 급격히 증가하였다. 이는 2초까지는 결정립의 조대화에 의한 경도값의 감소가 일어나지만, 3초에서는 미세한 ${\alpha}+{\beta}$ 상의 층상조직이 발달하였기 때문으로 판단된다.