• 대한디지털의료영상학회논문지
• /
• 제9권2호
• /
• pp.11-16
• /
• 2007

We have evaluated and compared of gradient echo and spin echo EPI for compensating about deeply distortion aspect in case of post-operation patients in magnetic resonance image. A total of 100 patients were performed on 3.0 T(GE Signa Excite E2, USA) with 8ch head coil. As a result of analysis, The SNRs of whiter and gray matter areas were 36.74 $\pm$ 06 and 39.96 $\pm$ 09 in the gradient echo EPI, the SNRs which white and gray matter areas were slightly higher than gradient echo EPI(P<0.005, paired student t-test). It was 46.24 $\pm$ 11 and 51.38 $\pm$ 13 in gradient and spin echo EPI, respectively. The signal intensity in the whiter and gray matter areas also were 87.33 $\pm$ 15.24 and 140.66 $\pm$ 13.45 in the gradient echo EPI techniques, The signal intensity of gradient echo EPI showed higher values compared to spin echo EPI. Otherwise, gradient echo EPI technique is distortion enough to operation wound and edge of the image, while spin echo EPI technique did not appear almost. In this point, the spin echo EPI technique, after surgical operation according to patient state beside gradient echo EPI techniques that signalbeside gradient echo EPI techniques that signal intensity is high and patient's case which image distortion is serious by metal etc, will be provide the useful information in adults and pediatric patients.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.182-188
• /
• 1999

A theoretical study of elastohydrodynamic lubrication of elliptical contacts with both rolling and spin has been carried out. A finite difference method and the Newton-Raphson method are applied to solve the problem. The velocity vectors resulting from combined spin and rolling/sliding motion lead to asymmetric pressure distributions and film shapes. Film contours and variations of the minimum and central film thicknesses are compared with various spin-roll ratios. At high spin-roll ratios the minimum film thickness is considerably reduced, whereas the central film thickness decreases less dramatically, The present numerical scheme can be used in the analysis of general elliptical contact problems.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.565-573
• /
• 2020

Unlike fin-stabilized projectiles, there has been some difficulty measuring the attitudes of spin-stabilized projectiles during the long-range flight due to their high spin rates. In this work, solar and geomagnetic sensors were used to measure the attitude of a spin-stabilized projectile. A method to calculate the attitude of the projectile from the signals of the sensors was introduced as well as the methods to process the signals of the sensors. To validate the methods, the attitude of a projectile was calculated with the sensor signals from the actual flight data.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.272-277
• /
• 2005

Continuously variable transmission (CVT) of toroidal type has a elliptical shape of contact zone under the elastohydrodynamic lubrication (EHL) condition, where the power is transmitted only by shearing the lubricant. Due to the small contact area of elliptical shape, the traction of the shear behaviors of lubricant over the contact zone is under extremely high contact pressure over 1.0GPa. During the power transmission by shearing the fluid, many kinds of mechanical movements occur such as squeezing, sliding, rolling and spin. Among the movements, the spin effect that is the most undesirable contact behavior in transmitting the power frequently makes significant abnormal wear damage. In this work, the analysis of elliptical contact of EHL with spin effect is performed, which will give very useful information to understand the traction behaviors in toroidal type of CVT system.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.262-262
• /
• 2003

Creating a new spin-based electronics (often called "spin-electronics" or "spintronics") is one of the hot topics in the current solid-state physics and electronics research. In order to utilize the spin degree of freedom in solids, particularly in semiconductors the current electronics is based on, we need to fabricate appropriate materials, understand and control the spin-dependent phenomena. In this ta1k, I will review the recent deve1opments of epitaxial ferromagnetic hetero structures based on semiconductors towards spintronics. This includes the semiconductor materials and hetero structures having high ferromagnetic transition temperature (III-V based alloy magnetic semiconductors, Mn-delta-doped magnetic semiconductors, and related heterostructures), spin-dependent transport and tunneling, and their device applications (tunneling magnetoresistance devices and three-terminal devices). Future issues and prospects will be also discussed.

• Journal of Magnetics
• /
• 제2권4호
• /
• pp.143-146
• /
• 1997

The effects of deposition rate on exchange coupling field Hex and coercive field Hc in NiO spin-valves are discussed. The Hex and Hc increased with deposition rate of NiO film. The rms roughnesses of the NiO deposited at 6 ${\AA}$/min (NiO-Low) and 30${\AA}$/min (NiO-High) were almost similar, however, the short-range roughness increased with the deposition rate. The Hex, Hc and surface morphologies for the modulated NiO spin-valve films such as NiO-Low\NiO-High\NiO-Low and NiO-High\NiO-Low were investigated.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.272-273
• /
• 2003

Spin dynamics has been investigated intensively in various kinds of fields. Most popular one is an initial permeability at high frequency. Also, magnetic after-effect such as thermal fluctuation of fine magnetic particles and disaccommodation in soft magnetic materials were extensively studied in the past. When we apply an external farce with the same frequency as that of the system being examined, the system absorbs the external energy and the precession enhances. It is called resonance in general. Among the various resonances, ferromagnetic resonance (FMR) has been used as a good tool to evaluate material constants such as saturation manetization or spin damping parameter by analyzing a resonance curve. In this talk first instinctive understanding of Gilbert spin damping and spin pumping will be explained. Then, experimental data for enhancement of Gilbert damping parameter (G) evaluated from FMR spectrum and spin precession measured by a time resolved pump-probe method for Permalloy thin film will be introduced. Finally, magnetization reversal observed by air-coplanar probe will be given.

• Advances in materials Research
• /
• 제2권4호
• /
• pp.181-193
• /
• 2013

Description and theory of spin coating technique has been elaborately outlined and a spin coating machine designed and fabricated using affordable components. The system was easily built with interdisciplinary knowledge of mechanics, fluid mechanics and electronics. This equipment employs majorly three basic components and two circuit units in its operation. These include a high speed dc motor, a proximity sensor mounted at a distance of about 15 mm from a reflective metal attached to the spindle of the motor to detect every passage of the reflective metal at its front and generate pulses. The pulses are transmitted to a micro-controller which process them into rotational speed (revolution per minute) and displays it on a lead crystal display (LCD) which is also a component of the micro-controller. The circuit units are a dc power supply unit and a PWM motor speed controlling unit. The various components and circuit units of this equipment are housed in a metal casing made of an 18 gauge black metal sheet designed with a total area of 1, $529.2cm^2$. To illustrate the use of the spin-coating system, ZnO sol-gel films were prepared and characterized using SEM, XRD, UV-vis, FT-IR and RBS and the result agrees well with that obtained from standard equipment and a speed of up to 9000 RPM has been achieved.

• 한국자기학회지
• /
• 제5권6호
• /
• pp.968-973
• /
• 1995

고주파 마그네트론 스파터링 방법으로 제작한 다결정 $Ni_{83}Fe_{17}$ 합금박막의 열처리 효과를 고찰하기 위하여 제작된 시료를 $135^{\circ}C,\;225^{\circ}C$의 공기분 위기 및 $160^{\circ}C,\;220^{\circ}C,\;330^{\circ}C,\;390^{\circ}C\;및\;420^{\circ}C$의 아르곤 분위기에서 각각 1시간씩 열처리한 후, 강자성 공명실험을 통해 스핀파 특성변화를 고찰했다. 정자기장을 박막면에 수직한 방향으로 인가하면서 측정한 강자성 공명실험에서 여러개의 스핀파 모우드가 관측되었는데, 열처리하지 않은 시료와 아르곤 분위기에서 열처리한 시료에서는 홀수모우드만 관측되었다. 공기중 $225^{\circ}C$에서 열처리 한 시료에서는 시료양면의 표면이방성차가 증가하여 짝수모우드의 스핀파도 관측되었다. $420^{\circ}C$의 아르곤 분위기에서 열처리한 시료의 경우, 스핀파들이 높은 자기장 쪽으로 이동하는 모습을 보였는데, 이와같은 현상은 열처리과정에서 시료의 포화자화가 증가했기 때문으로 생각된다. 또한 스핀파들 사이의 간격들이 급격히 좁아지는 경향을 보였는데, 이는 시료내부의 자기적 균일성이 증가하는데 그 원인이 있는 것으로 해석된다.