• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.98-105
• /
• 2008

FlexRay is a high-speed communications protocol with high flexibility and reliability. It was devised by automotive manufacturers and semiconductor vendors and implemented as on vehicle LAN protocol using x-by-wire systems. FlexRay provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for automotive applications. In this paper, we first design the FlexRay communication controller, bus guardian protocol specification and function parts using SDL (Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay system was synthesized using Samsung $0.35{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 76 MHz. In addition, to show the validity of the designed FlexRay system, the FlexRay system is combined with automobile advance alarm system in vehicle applications. The FlexRay system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.499-514
• /
• 1997

This paper proprses the architeecture of an interconnection network for Advanced Information Communi-cation Procssing System(AICPS)developde for prividing open information communication servies on a variety of heterogeneous networks.The proposed Interconnection network,called High Speed Swiching Fabric(HSSF),has been designed by a common bus.It can handile 32 i/O channels,each of which uses serial communication method using 100Mbps TAXI.The switching bandwidth of the common bus is 640Mvps.Each I/O channel can be alloted about 20Mbps bandwidth in steady state,and therefore it's sufficient bandwidth is able to interwork with ISDN and Internet services, as well as PSTN. HSSF is composed of the switching board assembly,the subscriber,I/O board assemly,and the backplane board assembly.An attached node takes in the network adapter board assembly to adapt the high speed interworking protocol.For reliability,HSSF is duplicated with load-sharing method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.57-65
• /
• 2014

This paper presents a framework that is based on a reconfigurable macro-model of current-mode logic (CML) high-speed digital circuits enabling equation-based design optimization. The proposed macro-model is compatible with geometric programming, thereby enabling constraint-driven top-level power optimization. The proposed optimization framework is applied to a design of CML based serial-link transmitter with user-defined design specifications as an example of high speed digital circuits using 45nm and 90nm CMOS technology. The proposed optimization framework can derive a design with optimal power efficiency for given transistor technology nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.319-324
• /
• 2005

The interface between host processor and the ShortStack Micro Server may be a Serial Communication Interface(SCI). The LonWorks control module with a high performance is developed, which is composed of the 8 bit PIC Microprocessor for host processor and the smart neuron chip for the ShoretStack Micro Server. This intelligent control board is verified as proceeding the various function tests from experimental system with an boost pump and inverter driving systems. It is also confirmed that the developed control module provides stably 0-10VDC linear signal to the input signal of inverter driving system for varying the induction motor speed. Thus, the experimental results show that the fabricating intelligent board carried out very well the various functions in the wide operating ranges of boost pump system. This developed control module expect to apply to industrial fields to require the comparatively exact control and monitoring such as multi-motor driving system with inverter, variable air volume system and the boost pump water supply systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.166-171
• /
• 2015

Recently, the international standard RS-422 serial communication, which was primarily designed for the communications between micro-controllers, has been used as a communication method on the ship. However, as the NMEA (National Marine Electronics Association) 2000 standardization progresses recently, a high-speed Ethernet-based communication environment is expected to be an alternative communication method instead of the RS-422 gradually. In addition, the ship's main instrumentation equipment with versatility and convenience is implemented to control devices as monitoring and controlling tools. This paper describes an implementation of wireless ultrasonic anemometer and anemoscope data processing and logger system using PC network, where the control processing equipment such as a separate operational console, data-logger, and indicator is required for the system. For these, the related element technologies to implement ultrasonic anemometer and anemoscope data processing system are expressed as a functional modules, and the NMEA 2000 standard certified data-logger system is implemented without the separate operational console.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.48-55
• /
• 2009

This paper presents a high-speed Forward Error Correction (FEC) architecture based on three-parallel Reed-Solomon (RS) decoder for next-generation 100-Gb/s optical communication systems. A high-speed three-parallel RS(255,239) decoder has been designed and the derived structure can also be applied to implement the 100-Gb/s RS-FEC architecture. The proposed 100-Gb/s RS-FEC has been implemented with 0.13-${\mu}m$ CMOS standard cell technology in a supply voltage of 1.2V. The implementation results show that 16-Ch. RS-FEC architecture can operate at a clock frequency of 300MHz and has a throughput of 115-Gb/s for 0.13-${\mu}m$ CMOS technology. As a result, the proposed three-parallel RS-FEC architecture has a much higher data processing rate and low hardware complexity compared with the conventional two-parallel, three-parallel and serial RS-FEC architectures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1248-1255
• /
• 2012

LDPC decoder architectures are generally classified into serial, parallel and partially parallel architectures. Conventional method of LDPC decoding in general give rise to a large number of computation operations, mass power consumption, and decoding delay. It is necessary to reduce the iteration numbers and computation operations without performance degradation. This paper studies horizontal shuffle scheduling(HSS) algorithm and self-correction normalized min-sum(SC-NMS) algorithm. In the result, number of iteration is half than conventional algorithm and performance is almost same between sum-product(SP) and SC-NMS. Finally, This paper implements high-speed LDPC decoder based on FPGA. Decoding throughput is 816 Mbps.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.663-665
• /
• 2000

For the control system of thermal turbine in fuel and nuclear power plant, as high reliability and availability are required, redundant control system is generally applied. This paper presents the configuration and design of such a redundant control system that can be suitable for control and monitoring of the turbine. System components such as I/O system, communication networks, voting system are designed, and especially the new intelligent voter using serial communication are proposed. The characteristics of the implemented control system is independence of the control, protection and monitoring functions, and discrimination of the redundancies, and high availability. The control functions such as speed control, load control, valve control and protective functions such as overspeed and PLU are designed in detail.