• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.693-696
• /
• 2000

군사용 전동기는 고속 고출력 고신뢰성 저소음의 특징을 갖고 있어야 하며 이러한 성능을 구현하기 위한 전동기/드라이브의 설계 및 제조 시험은 일반적인 전동기 인버터 구조와는 많이 상이하다 우선 7상6극의 전동기 특성을 갖고 있어 같은 상전류에 대해 3상 전동기보다 높은 출력을 얻을 수 있어 동일출력의 3상제어반에 비해 적응 용량의 전력소자를 분산시킬수 있으므로 조립이 용이하다 또한 전류 리플을 동일 용량의 3상 전동기에 비해 약 2배 가량 감소시킬 수 있다 고속(25,000ppm) 회전을 통해 체적대비 출력을 극대화 하여 3kW/Kg으로 세계적인 수준에 도달된 상태이다 본논문에서는 한정된 전원전압 전류 범위 공간등의 제한하에서 목표 출력과 성능이 나올수 있는 드라이브구성 및 제어 알고리즘 시험결과를 기술한다.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.210-213
• /
• 2004

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. In the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder to be suitable for practical applications is proposed. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.667-670
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. In the high-speed region, switching angles are fluctuated back and forth out of\ the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.163-167
• /
• 2003

본 논문에서는 PWM 펄스를 랜덤하게 위치시킬 수 있는 새로운 3상 공간벡터 RPWM (Random PWM) 기법을 제안하고 있다. 기존의 RPWM 방식과 달리 SVPWM에 의해 발생된 PWM 펄스를 랜덤하게 위치시키는 원리를 각 섹터마다 달리 적용하여 쉽게 RPWM을 구현하는 기법을 제안한다. 제안된 기법의 타당성 검증을 위하여, 제안된 RPWM (Random PWM) 기법 알고리즘에 대해 DSP를 이용한 IGBT 인버터 구성에 의한 실험을 수행하였다. 이에 대한 결과 중, 특히 10000 rpm 이상의 고속운전특성에서의 인버터 출력 전압 및 전류의 고조파 스펙트럼을 넓은 주파수 영역으로 고루 분산시켜 제안된 RPWM의 특정고조파의 저감효과를 입증하고자 한다

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.49-51
• /
• 2005

The single phase switched reluctance motor(SRM) has many merits in practical appliance because it has simple operating drive and control system, very high energy density per unit volume comparing with three phase SRM. But it has also problems to need a starting device and to generate the torque ripple. One of the major problems is a torque ripple which causes increased undesirable acoustic noise and speed ripple. This paper describes an approach to determine a rotor type to minimize the torque ripple.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.159-166
• /
• 2003

The winding insulation of low-voltage induction motors in adjustable-speed drive system with voltage-fed Inverters is substantially stressed due to the uneven voltage distribution and excessive voltage stress (dv/dt), which result in the premature insulation breakdown In this paper, the detailed insulation test results of 26 low-voltage induction motors are presented. Six different types of insulation techniques are applied to 26 motors. The insulation characteristics are analyzed with partial discharge, discharge inception voltage, AC current, and dissipation factor tests Also, insulation breakdown tests by high voltage pulses are performed, and the corresponding breakdown voltages obtained.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1000-1002
• /
• 2000

SRM(Swithed Reluctance Motor)은 회전자 위치와 동기 되어 여자 되어야 한다. 이러한 토오크 발생기구의 특성상 회전자 위치각에 대한 정보가 필수적이다. 회전자 위치각의 검출은 일반적으로 엔코더나 레졸버를 사용하나, 본 연구에서는 저 분해능 엔코더를 사용한 경우에도 고정도의 온, 오프 스위칭. 각을 제어하기 위해서 미소각 예측 및 미래 지향적 스위칭각도 제어기법을 제안하였다. 또한 이를 프로토 타입으로 구현하기 위해서 89C196의 HSO(High speed output) 기능을 사용하였다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.447-452
• /
• 1995

In this paper a simple method of a position control for brushless DC motor is presented. For precise position control, a high performance torque controller is needed and a novel current control method is proposed. The current controller detects the uncommutating mode current for every 60.deg. (elec. angle) and controls it with PI controller. The current control loop includes the feedforward of back EMF and the feedforward of the neutral voltage between the neutral point of the inverter and the neutral point of the machine. In the position control, the acceleration pattern is calculated from the position reference. Then the speed trajectory is calculated from the acceleration pattern. The experimental results are presented to verify the proposed methods.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.211-213
• /
• 2007

The electrical parameters are used to calculate gains in the current regulator as well as to determine the reference currents of speed controller in various control strategies of Synchronous Reluctance Motors (SynRMs). Many methods of measuring or estimating the electrical parameters of SynRM have been proposed by other authors. But almost papers only measure or estimate in the limited conditions without fully considering the effects of inverter, connecting wire and magnetic saturation. The parameter results are usually different from the real system parameters. The drive performance, therefore, can not be good if using inaccurate parameters. In this paper, several methods used to measure the electrical parameters are introduced. The first method is LCR meter. And then, a method determining inductances by measuring AC current and voltage from AC power supply is presented. A new method with high reliability is proposed to measure the electrical parameters of SynRM. The experiment results verify the effectiveness of the new proposed method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.166-174
• /
• 2014

Fuel injection pressure has steadily increased in diesel engines for the purpose of improving fuel efficiency and cleaning exhaust gas, but it has now reached a point, where the cost for higher pressure does not warrant additional gains. Common rail systems on modern diesel engines have fuel pumps that are mechanically driven by crankshaft. The pumps actually house two pumping module inside: a low pressure pump component and a high pressure pump component. Part of the fuel compressed by the low pressure component returns to the tank in the process of maintaining the pressure in the common rail. Since the returning fuel represents pumping loss, fuel economy improves if the returned fuel can be eliminated by using a properly controled electrical fuel pump. As the first step in developing an electrical fuel pump the fuel supply system on a 6 liter diesel engine was modeled with AMESim to analyze the workload and the fuel feed rate of the injection pump, and the results served as basis for selecting a suitable servo motor and a reducer to drive the pump. A motor controller was built using a DSP and a program which controls the common rail pressure using a proportional control method based on the target fuel pressure information from the engine ECU. A test rig to evaluate performance of the fuel pump is implemented and used to show that the newly developed electrically driven fuel pump can satisfy the fuel flow demand of the engine under various operating conditions when the rotational speed of the pump is adequately controlled.