• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.592-593
• /
• 2021

In July of last year, the Korean version of the New Deal National Report Conference was held in the presence of the President, and the "Korean version of the New Deal Comprehensive Plan" was announced as its core strategy. In the field of education, the "Green Smart Future School" project has been included as one of the top 10 Korean New Deal projects. And last year, due to the spread of non-face-to-face classes due to COVID-19, the demand for ICT technology in front-line education sites rapidly increased. Therefore, In this paper, we examine the problems of the wireless network and wired infrastructure of the classroom in the past, and design wired network infrastructure and wireless network equipment for green smart classrooms with high-speed wireless networks that can be used for non-face-to-face and face-to-face classes, and build them in actual classrooms. An example for the following was presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.467-469
• /
• 2006

In wireless network environments, as users' demands on high-speed data communications due to increase of multi-media services, the necessity of new high-speed WLAN technologies has appeared. Nowaday, IEEE is standardizing a new WLAN protocol caned as IEEE 802.11n. To effectively use wireless resources, IEEE 802.11n introduces MAC aggregation function which is similar to that in IEEE 802.11e. In case of transmitting several frames without MAC aggregation, the frames include individual frame header and trailer, and their corresponding acknowledgement frames can appear on wireless link. However, if they are aggregated into single MAC frame, we can reduce the number of used bits due to frame headers/trailers and also remove redundant acknowledgement frames. In this paper, we explain two different MAC frame aggregation methods for IEEE 802.11e and IEEE 802.11n and evaluate their throughput by simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.87-91
• /
• 2006

With the growth of the internet, the number of wireless internet users has increased continuously up to date. However, mobile communications could not support high speed transmission rate with cheap communication fee and wireless LAN has problems in providing terminal mobility and wide area connectivity, respectively. So the WMAN standard has been newly designed to make up for these limits. The initial 802.16 specification effectively offers a solution for providing fixed users with high speed wireless communication but it does not offer terminal mobility. So the 802.16d and 802.16e have been developed as the next generation solution that can support various PHY layer (SC, SCa, OFDM, OFDMA) and offer the terminal mobility. In this paper, we propose an effective uplink scheduling algorithm for VoIP with using UGS, and we show that our proposed algorithm is superior in view of average delay and management of uplink bandwidth to conventional rtPS algorithm and the scheme in reference, with using NS-2 network simulator.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.24-28
• /
• 2010

This paper is presented on the antenna design for notepc platform. We present the antenna with combination of electric-magnetic radiator for dual-band Wireless Local Area Network (WLAN) service and a High Speed Downlink Packet Access (HSDPA) service. Due to the limited antenna space in notepc platform, the antennas for various wireless communication service should be located at a very small area. In this paper, the magnetic-type radiator works for high frequency band (1.7 - 2.1 GHz) application and the electric-type radiator works for low frequency band (820 - 960 MHz) application. This combination produces wide-band characteristics in the high frequency band. Simulation and experimental results of input impedance and gain characteristics of the proposed antenna are presented. There are good agreements between the simulated and measured S11 and gain values.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.13-22
• /
• 2005

IEEE 802.11a is a standard for the high-speed wireless local area network (WLAN), supporting from 6 up to 54 Mbps in a 5 GHz band. We propose a channel equalization algerian and a sampling clock recovery algorithm by utilizing the Viterbi decoder output of the IEEE 802.11a WLAN standard. The proposed channel equalizer adaptively compensates channel variations. The proposed system uses re-encoded Viterbi decoder outputs as reference symbols for the adaptation of the channel equalizer. It also extracts sampling phase information with the Viterbi decoder outputs for fine adjustment of the sampling clock. The proposed sampling clock recovery and equalizer are more robust to noise and frequency selective fading environments than conventional systems using only four pilot samples.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.22-29
• /
• 2000

In this paper, we analyzed the performance of EY-NPMA(Elimination Yield-Non-preemptive Priority Multiple Access) protocol-channel access control protocol of HIPERLAN(HIgh PErformance Radio Local Area Network) type 1 specification, adopted as european high speed wireless LAN standard by ETSI(European Telecommunication Standards Institute). We established a system model for EY-NPMA protocol analysis, analyzed success probability in a channel access cycle, and derived expressions for the average length of contention phase. Using a M/G/1 model, we approximated the normalized delay, and throughput, and we evaluated these results by simulations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.333-343
• /
• 2009

Tactical Information Communication Network(TICN) is a concept-type integrated Military Communication system that enables precise command control and decision making by unifying the diversified military communication network and conveying diverse range of battle field information on real-time, at right place at right time. TICN is designed to advance into high speed, large capacity, long distance wireless relay transmission. To support mobility in battlefield environments, the application of Ad-hoc networking technology to its wireless communication has been examined. Ad-hoc network is consist of mobile nodes and nodes in the network depends on the cooperation of other nodes for forwarding of packets. In this context, some non-cooperating nodes may delay forwarding of packets or drop the packets. This may hamper the network as a whole and disrupt communication between the cooperating nodes. To solve this problem, we present a solution with a Node Weight Management Server(NWMS), which manages each node's weight according to its behavior in local area. When the NWMS detects misbehaving node, it increases the node's weight. If the node's weight exceeds a predefined threshold then the NWMS broadcasts the node's information into network to isolate the misbehaving node from the network. These mechanisms show that they are highly effective and can reliably detect a multitude of misbehaving node.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2583-2605
• /
• 2016

Fingerprint positioning is a main stream and key technique for seamless positioning systems. In this paper, we develop a performance evaluation testbed for fingerprint based Wireless Local Area Network (WLAN) positioning system. The testbed consists of positioning server, positioning terminal, Access Point (AP) units, positioning accuracy analysis system and testing scenarios. Different from other testbeds tended to focus on testing in same situation, in the proposed testbed, a couple of scenarios are set to test the positioning system including indoor and outdoor environments. Handset-side positioning mode and network-side positioning mode are provided simultaneously. Variety of motion models, such as static model, low-speed model and high-speed model are considered as well as different positioning algorithms. Finally, some implementation cases are analyzed to verify the credibility of the testbed.