• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.105-108
• /
• 1999

In this paper, we define the high-speed router as a router, which can support aggregated ports over 25Gbps, and provide issues and trends in high-speed router design. We propose design considerations on IP packet forwarding, switching fabric, packet scheduling and buffer management, network resource reservation, and router operation and administration.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.74-81
• /
• 2001

In this paper. the architecture of a high-speed ATM router using ATM switch is studied and the performance of the high-speed ATM router is analyzed through simulation. The high-speed ATM router using ATM switch is able to reduce the load of router and the processing time of a packet in the router. The size of router buffers has been studied through simulation processes for the analysis of performance capacity in due course of making changes in routing time(RT), which is the performance capacity parameters of high-speed ATM routers, flow table size(FS), flow live time(FT) and input circuit efficiencies. The result of this study can be used as the source material for analyzing the suitability of equipment in upgrading networks and applying high-speed ATM routers by using ATM switches.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.788-791
• /
• 2004

This paper presents a general description of single and dual contact tooling systems, finite element analysis, and discussions on the application of the system to the 5-head router machine which is in particular for aerospace components. This study has been performed as part of the development of the new generation 5-head router machine which is designed for high productivity. Such high productivity in essence requires high speed rotation and multiple spindles in one machine. The high speed rotation may exceed a range in a conventional single contact tooling system. The conventional tooling system is reevaluated in comparison with the dual-contact system. Finite element analysis using simplified spindle models compares major differences in the two systems. Some problems in the application to the 5-head router machine are discussed.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.267-270
• /
• 2000

In this paper, we consider the simple redundant structures with the function of hardware based active/standby control. The system includes two switch modules. The switch module is connected to a data bus, but only the active switch module has control of the data bus. The standby unit takes over the function of the active unit when the active unit failure or mode command are asserted. And this paper illustrate the high-speed router system and the overall redundant system architecture. The proposed redundant architecture for 80G Router system is verified and implemented with experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.542-547
• /
• 2018

Various countries around the world are conducting various studies to apply information and communication technology to marine safety. Based on this, the International Maritime Organization (IMO) has established the e-Navigation standard to apply the latest information and communication technology to marine services. In Korea, the Ministry of Maritime Affairs and Fisheries is promoting Korean e-navigation considering domestic marine environment and is trying to apply LTE communication method as a high-speed wireless communication method at sea. In this paper, we describe the development of an LTE based marine router system supporting 700Mhz frequency band allocated for high speed maritime wireless communication service. Experiments on the possibility of 100km distance communication from base station using LTE based ship router are shown. LTE - based high - speed maritime wireless communication router system can provide communication infrastructure necessary to develop various accident prevention technologies that may occur at sea.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.275-278
• /
• 2000

As the operating frequency of digital modules in network system becomes fast, integrity of signals between modules is regarded as a important factor in high speed system design. To guarantee the signal integrity, many factors that deteriorate quality of signal should be considered. In this paper, we survey many factors which be considered while in designing and imp]ementing the backplane for high speed router and analyze the simulation result and experimental result.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.663-671
• /
• 2016

According to rapidly increasing of network traffics, necessity of high-speed router also increased. For various purposes, like traffic statistic and security, traffic measurement function should performed by router. However, because of the nature of high-speed router, memory resource of router was limited. RCC proposed a way to measure traffics with high speed and accuracy. Additional quadratic probing hashing table used for accumulating elephant flows in RCC. However, in our experiment, quadratic probing performed many overheads when allocated small memory space or load factor was high. Especially, quadratic requested many calculations in update and lookup. To face this kind of problem, we use a cuckoo hashing which performed a good performance in update and loop for enhancing the RCC. As results, RCC with cuckoo hashing performed high accuracy and speed even when load factor of memory was high.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.253-256
• /
• 1998

In this paper, we discuss the CPU Utilization and bottle neck of the router on campus network. Generally, high CPU utilization does not only makes slow network speed but also frequently network disconnection. The above characteristic is based on the network with one router. In order to solve this problem, we reconstruct network configuration with two routers. Our result shows that CPU utilization of network topology with two router have good performance compared to that with one.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.147-156
• /
• 2001

A high performance routing switch is an essential device to either the high performance parallel processing or communication networks that handle multimedia transfer systems such as VOD. The high performance routing chip called STC104 is a typical example in the technical aspect which has 32 bidirectional links of 100Mbps transfer sped. It has exploited new technologies, such as wormhole routing, interval labeling, and adaptive routing method. The high speed router has been applied into some parallel processing system as a single chip. However, its performance over the various interconnection networks with multiple routing chips has not been studied. In this paper, the strucrtures and characteristics of the STC104 have been investigated in order to evaluate the high speed router. Various topology of the STC104, such as meshes, torus, and N-cube are defined and constructed. Algorithms of packet transmission have been proposed based on the interval labeling and the group adaptive routing method implemented in the interconnected network. Multicast algorithms, which are often requited to the processor networks and broadcasting systems, modified from U-mesh and U-torus algorithms have also been proposed overcoming the problems of point-to-point communication.