• 제목/요약/키워드: High-speed Data Processing

검색결과 769건 처리시간 0.031초

망막 두께 측정을 위한 망막 촬영 및 다채널 영상획득장치 개발 (Development of Retina Photographing and Multi Channel Image Acquisition System for Thickness Measurement of Retina)

  • 양근호
    • 융합신호처리학회논문지
    • /
    • 제5권1호
    • /
    • pp.13-17
    • /
    • 2004
  • 망막 촬영 및 다채널 고속 영상 획득 시스템을 개발하였다. 망막 두께 측정은 망막을 3차원으로 촬영하고 고속으로 신호처리를 할 수 있는 시스템을 요구한다. 망막에 레이저를 투사한 후에 반사되어 돌아오는 레이저의 양을 array photo diode를 이용하여 감지하며 이를 3차원 영상화하여 망막의 두께를 측정할 수 있다. 망막에 레이저를 투사하는 장치, APD 광센서를 이용한 망막 영상화 장치, 다채널 고속 A/D 변환장치 및 PCI 인터페이스를 개발하였다. polygon mirror와 galvano mirror를 이용하여 HeNe 레이저 빔을 각각 수평방향과 수직방향으로 주사하여 이미지 평면을 만들어 망막에 투사하였다. APD 어레이 광센서를 이용하여 각 층별로 나타나는 망막영상을 획득하였으며, 이를 실시간으로 A/D 변환하여 PCI 버스를 통해 컴퓨터로 전송하였다.

  • PDF

TMS320C6713DSK를 적용한 평판의 고속 능동 진동제어 (High-Speed Active Vibration Control System of Plate using TMS320C6713DSK)

  • 최형식;허재관;서해용
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권6호
    • /
    • pp.918-924
    • /
    • 2009
  • This paper deals with the experimental assessment of the vibration suppression of the smart structures. First, we have presented the paper about the new high-speed active control system that we have developed using the DSP320C6713 microprocessor and a peripheral system composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA95. Since fast data processing is very important in the active vibration control of the structures, we utilized the fast processing DSP320C6713 microprocessor as a main processor to the controller and fast peripheral devices for fast control loop. To realize a fast active vibration control, we have analyzed and tested the processing time of the peripheral devices and provided the corresponding test results. Especially, we have focused on achieving the fast signal amplification of the PA95 device since it takes most of loop times of the control system. Finally, we performed numerous experiments of active vibration control of the aluminum plate to validate the superior performance of the developed control system based on previous mode tests of the plate.

항공전자 시스템 통합을 위한 데이터 버스 연구 (A Study on the Data Bus for the Integration of Avionics Systems)

  • 홍승범;지민석;김영인;홍교영;천기진
    • 한국항공운항학회지
    • /
    • 제17권3호
    • /
    • pp.70-77
    • /
    • 2009
  • We proposed the method of avionics integrated architecture using high-speed fiber optic bus. Typically, data bus of aircraft consists of electronic and optic data transmission method. Avionics systems are difficult to operate the electronic data transmission method for the high speed data processing, synchronization and interconnection between flight control system and flight management system efficiently. In this paper, it is known to look into the problem of data bus and the advanced trend in avionics systems, and propose the appropriate data bus of the advanced avionics systems.

  • PDF

개인 건강 정보 처리를 위한 배치 어플리케이션에서 데이터 질의 속도 향상을 위한 PHDItemReader 설계 및 구현 (Desgin and Implementation of PHDItemReader to Speed up Data Query in Batch Application for Processing Personal Health Record)

  • 전동철;황희정
    • 한국멀티미디어학회논문지
    • /
    • 제23권12호
    • /
    • pp.1496-1506
    • /
    • 2020
  • With the progress of miniaturization and high performance of various sensors, a lot of data is generated in various fields and being collected in real-time, but the use of such large-capacity data is often unable to keep up with the collection technology. In the medical field, health data is collected and managed by platform, which causes inconvenience to users in searching their own health data and receiving medical services. In this paper, in order to solve these problems, we designed and implemented PHDItemReader to improve the speed of data query in a batch application environment that can integrate and process health data having various data expression formats. The experiment compared and analyzed 3 types of query speed based on 1,000,000 hypothetical health data, and as a result of the experiment, it was verified that the PHDItemReader implemented in this paper improved up to about 21% compared to the existing one.

TDES CODER USING SSE2 TECHNOLOGY

  • Koo, In-Hoi;Kim, Tae-Hoon;Ahn, Sang-Il
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.114-117
    • /
    • 2007
  • DES is an improvement of the algorithm Lucifer developed by IBM in the 1977. IBM, the National Security Agency (NSA) and the National Bureau of Standards (NBS now National Institute of Standards and Technology NIST) developed the DES algorithm. The DES has been extensively studied since its publication and is the most widely used symmetric algorithm in the world. But nowadays, Triple DES (TDES) is more widely used than DES especially in the application in case high level of data security is required. Even though TDES can be implemented based on standard algorithm, very high speed TDES codec performance is required to process when encrypted high resolution satellite image data is down-linked at high speed. In this paper, Intel SSE2 (Streaming SIMD (Single-Instruction Multiple-Data) Extensions 2 of Intel) is applied to TDES Decryption algorithm and proved its effectiveness in the processing time reduction by comparing the time consumed for two cases; original TDES Decryption and TDES Decryption with SSE2

  • PDF

The Development of Rugged Embedded Measurement System by Using PXI Bus

  • Yu, Jae-Taeg;Kim, Dae-Won;Goo, Sang-Haw;Lee, Jang-Myung
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.53.1-53
    • /
    • 2001
  • We have used many Instrumentations to acquire the performance data of vehicles for many years. but these could not satisfied with environment specifications (vibration, shock, temperature) and data processing speed to applicate the performance test for armored military vehicles because of having developed as a common vehicles/fixed installation equipments. So new rugged embedded measurement system required to do large data acquisition and high processing speed (Maximum sample rate : 1.25MHz/ch) with rugged environment specifications. We have developed embedded measurement system by using PXI(PCI eXtension for Instrumentation)bus interface which were composed of stand alone controller and versatile data acquisition boards(analog, digital, vision ...

  • PDF

Sentiment Orientation Using Deep Learning Sequential and Bidirectional Models

  • Alyamani, Hasan J.
    • International Journal of Computer Science & Network Security
    • /
    • 제21권11호
    • /
    • pp.23-30
    • /
    • 2021
  • Sentiment Analysis has become very important field of research because posting of reviews is becoming a trend. Supervised, unsupervised and semi supervised machine learning methods done lot of work to mine this data. Feature engineering is complex and technical part of machine learning. Deep learning is a new trend, where this laborious work can be done automatically. Many researchers have done many works on Deep learning Convolutional Neural Network (CNN) and Long Shor Term Memory (LSTM) Neural Network. These requires high processing speed and memory. Here author suggested two models simple & bidirectional deep leaning, which can work on text data with normal processing speed. At end both models are compared and found bidirectional model is best, because simple model achieve 50% accuracy and bidirectional deep learning model achieve 99% accuracy on trained data while 78% accuracy on test data. But this is based on 10-epochs and 40-batch size. This accuracy can also be increased by making different attempts on epochs and batch size.

DRAM기반 SSD에서 고속백업을 위한 DRAM기반 SSD에서 고속백업을 위한 효율적인 데이터 분산저장 알고리즘 개발 (Development of Efficient Data Distribution Storage Algorithm for High Speed Data Backup in DRAM based SSD)

  • 송한춘;안혁종
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.11-15
    • /
    • 2015
  • 인터넷 대용량 서버에서 다수 접속자의 데이터를 고속으로 처리하기 위하여 반도체디스크(SSD)를 사용하고 있다. 본 논문에서는 DRAM을 SSD로 사용하는 서버환경에서 갑작스런 전원장애 시에 데이터의 안정성을 확보하기 위한 고속백업 분산저장 알고리즘을 제안하였다. 제안한 알고리즘은 백업컨트롤러에서 DRAM 데이터를 중간버퍼를 활용한 스케줄링 기법으로 플래시메모리에 분산저장 하는 방법이다. 본 논문에서는 제안한 알고리즘을 기존 백업알고리즘과 동일한 조건의 대용량 서버환경에서 백업처리성능 비교시험을 실시하였다. 시험결과에 의하면 제안한 알고리즘은 기존 알고리즘에 비하여 DRAM의 데이터를 약 2배 이상 고속으로 백업저장을 할 수 있음을 알 수 있었다.

한국형 고속열차 보조전원장치 고장진단과 성능평가 (Fault Diagnosis and Performance Evaluation of Auxiliary Block for Korean High-Speed Railway)

  • 김석원;김기환;김상수;구훈모;조현욱;한영재
    • 한국철도학회논문집
    • /
    • 제9권5호
    • /
    • pp.612-617
    • /
    • 2006
  • As the on-board electric devices determine the performances of vehicles, production of reliable devices is important. To keep the reliability of devices constant, management of performance evaluation of the on-board devices is crucial. Because temperature has a serious effect on failures of the components of the devices, its measurement is the first step for good management. In this study, we described performance characteristics of domestic auxiliary block developed through G7 project. We measured the performances of auxiliary block during test running by the developed on-line measurement system. After we save the input real-time data from each signal of Korean High Speed Train through the network line, we can acquire necessary information through post-processing program. We verify the motor block characteristics of Korean High Speed Train by this system.

ATM망의 비연결형 서버를 위한 고속 CAM ASIC 설계 (ASIC design of high speed CAM for connectionless server of ATM network)

  • 백덕수;김형균;이완범
    • 한국통신학회논문지
    • /
    • 제22권7호
    • /
    • pp.1403-1410
    • /
    • 1997
  • Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

  • PDF