• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.51-56
• /
• 2001

Vapor explosion is one of the most important problems encountered in severe accident management of nuclear power plants. In spite of many efforts, a lot of questions still remain for the fundamental understanding of vapor explosion phenomena. Therefore, KAERI launched a real material experiment called TROI using 20 kg of UO2 and ZrO2 to investigate the vapor explosion phenomena. In addition, a small-scale experiment with molten-tin/water system was performed to quantify the characteristics of vapor explosion and to understand the phenomenology of vapor explosion. A number of instruments were used to measure the physical change occurring during the vapor explosion. In this experiment, the vapor explosion generated by molten fuel water interaction is visualized using high speed camera and the pressure behavior accompanying the explosion is investigated.

• 소성∙가공
• /
• 제15권9호
• /
• pp.635-640
• /
• 2006

Sandwich sheet with inner structure is expected to find many applications because of high stiffness to mass ratio. However, low resistance to the compressive pressure in the thickness direction is a dominating factor in the formability of sandwich sheet. In this study, sandwich sheet with pyramid type core is considered. For the compressive characteristics in the thickness direction, experiments and finite element simulations are carried out. In the experiment, deformation behavior is observed and discussed as the compression proceeds. It is shown that a corresponding finite element simulation can give a reasonable agreement with experiment in terms of maximum pressure. However, simulation shows some discrepancy from the experiment in terms of compressive pressure-displacement characteristics. The reasons for this discrepancy are studied in the geometrical imperfectness of sandwich sheet. It is also observed that most of deformation is dominated by buckling mode of pyramid legs.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.26-32
• /
• 2007

A series of large-scale experiments were carried out in order to examine wave-induced liquefaction in a loosely packed sandbed, its afterward high densification and liquefaction by oscillatory pore pressure. The experiments were conducted in a Large Hydro-Geo Flume that can nearly solve the problems of scale effects of the sandbed, and the 50% sieve diameter of sand was 0.2 mm. The generation of residual pore pressure and its afterward high densification which had observed by Takahashi et al. (1999) in a wave flume experiment using fine sand with the size of 0.08 mm. As a result, the relative density of the sandbed after high densification was increased up to 79% and liquefaction by oscillatory pore pressure was not observed.

• 한국광학회지
• /
• 제24권5호
• /
• pp.279-286
• /
• 2013

Brillouin spectroscopy has been widely used for the investigation of acoustic properties of condensed matters in the hypersonic region. A high-pressure Brillouin spectrometer was set up by combining a diamond anvil cell and a tandem multi-pass Fabry-Perot interferometer. It was successfully applied to liquid ethanol, and the pressure dependence of the sound velocity, the refractive index and other acoustic properties were derived based on the measurements. The detailed optical setup and experimental procedure are described.

• Journal of Nutrition and Health
• /
• 제22권2호
• /
• pp.91-101
• /
• 1989

This study was performed to investigate the effects of different dietary magnesium levels on systolic blood pressure and mineral distribution in normotensive and spontaneously hypertensive rats. In experiment 1, Normotensive rats(NTR ; Sprague Dawley, Female) were given diets containing regular magnesium (0.05% Mg ; rMg), marginal magnesium (0.01% Mg ; mMg) or marginal magnesium with stress(0.01% Mg + stress ; mMg + Str). In experiment 2, spontaneously hypertensive rats (SHR ; Kyoto Wistar, Femal) were fed diets containing regular magnesium(0.05% Mg ; rMg) and high magnesium (0.2% Mg ; hMG). The following were found ; 1) NTR treated with marginal magnesium with stress showed significant increase in systolic blood pressure (SBP). Marginal magnesium diet without stress resulted in nonsignificant increase in SBP. Significant in crease of blood pressure showed in NTR treated with marginal magnesium and stress was associated with decreased magnesium and increased calcium content in femur, reticulocyte and plasma. 2) In experiment 2, magnesium supplementation to SHR showed significant attenuation of their systolic blood pressure with increasing age. The attenuation of SBP showed in SHR was associated with increased magnesium, lowered calcium content in cardiac muscle and reticulocyte and decreased plasma sodium and aldosterone level.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1614-1622
• /
• 2004

When a High Speed Train (HST) passes through a station with no stop, effects of wind pressure transients caused by this passing train have to be considered for the safety of passengers on the platform and for the possible structural safety problems as well. In Gwangmyeong and Daejeon stations of the Korean high speed railroad, tunnels inside stations for the passing train are proposed to reduce the noise and wind pressure transients to the passengers on the platform. In the present study, transient 3-D full Navier-Stokes solutions with moving mesh to implement train movement are obtained and compared with the results obtained by the towing tank experiment. Investigations on flow phenomena for various train speeds and design modifications are also performed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1989년도 추계학술발표회논문집
• /
• pp.13-18
• /
• 1989

Temperature distribution of 250W high-pressure mercury lamp has been measured by the spectroscopic method using relative intensities of spectral lines. To obtain radial temperature distribution, the measured intensity which was integrated along the line of sight was transformed into radial line intensity by Abel's inversion. Temperature was determined from relative intensities of spectral lines of the same atomic species. The measured temperature of 250W high-pressure mercury lamp is 6000K at the axis. In this experiment temperature profile of high-pressure arc is papabolic as known.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.1-7
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.130-138
• /
• 2015

본 연구에서는 고유동 고강도 콘크리트의 현장타설에의 적용성 검토를 위해 거푸집의 측압검토를 수행하였다. 이를 위해 타설높이 및 타설속도를 주요변수로 정하여 실험체를 제작한 후, 수행한 실험으로부터 측압 및 온도변화를 측정하였다. 고유동 고강도 콘크리트의 최대 측압은 굳지 않은 콘크리트의 측압으로 나타났으며, 타설 직후 측압이 감소하기 시작하여 12시간 이후 안정화를 보였다. 3~4시간 이후 안정화가 나타나는 보통 콘크리트와 측압이 감소하는 경향은 유사하다. 타설속도가 빠를수록 최대 측압이 크게 발생하였으며, 시간의 경과에 따른 감소량은 거의 유사하였다. 또한 수화열과 측압감소 사이에 직접적인 연관성은 나타나지 않았다.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.241-247
• /
• 2013

The doctor blade is equipped in a toner cartridge and is a device to maintain the uniform thickness of a toner by controlling the pressure on the developing roller. The contact pressure between the developing roller and the doctor blade is one of the significant factors for image quality and durability of toner cartridge. The purpose of this study is to develop approximation model in order to minimize the time and cost which are needed much required in making optimal design of the doctor blade. Central composite design was used for the design of experiment and response surface design was used for approximation. The data for contact pressure were acquired through finite element analysis and data of image density and toner weight were acquired through experiment. The approximation model developed in this study has presented very high fitness.