• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.269-275
• /
• 2021

Light-emitting diodes (LEDs) are modulated using a square wave pulse sequence for flicker prevention and dimming control in visible light communication (VLC). In a VLC transmitter, the high and low bits of the non-return-to-zero (NRZ) data are converted to two square waves of different frequencies, which continue for a finite time defined by the fill ratio in an NRZ bit time. As the average optical power was kept constant and independent of data transmission, the LED was flicker-free. Dimming control is carried out by changing the fill ratio of the square wave in the NRZ bit time. In the experiments, the illumination of the LED light was controlled in the range of approximately 19.2% to 96.2% of the continuous square wave modulated LED light. In the VLC receiver, a high-pass filter combined with a latch circuit was used to recover the transmitted signal while preventing noise interference from adjacent lighting lamps.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.564-571
• /
• 2014

A single-stage current-balancing multi-channel light-emitting diode (LED) driver is proposed in this study. The conventional LED driver system consists of two cascaded power conversion stages, i.e., an isolation DC/DC converter and LED driver. LED driver is usually implemented with the same number of expensive boost converters as those of LED channels to tightly control the current through each LED channel. Therefore, its overall system size is not only bulky, but the cost is rather high. By contrast, the proposed LED driver system is composed of a single power stage with the DC/DC converter and LED driver merged. Although the current balancing circuit of the proposed LED driver requires only passive devices instead of expensive boost converters, all currents through multi-channel LEDs can be well balanced. Therefore, the proposed LED driver features a small system size, improved efficiency, and low cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LED TV.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1773-1779
• /
• 2015

본 논문은 컬러 클러스터 MIMO 기술을 적용하여 육상과 해상 간의 저비용 고속 무선 데이터 전송이 가능한 해상 가시광 통신 시스템을 제안한다. 제안하는 시스템은 각 컬러 클러스터에 50개의 RGB LED 로 구성되며, 온-오프키잉을 사용하여 변조한다. 수신기에서는 선택적 합성기술을 수행하여 컬러 클러스터의 다이버시티 효과를 얻어 비트오율 개선을 제공한다. 성능 실험에서는 해상 채널 구성을 위해 대기 난류 조건에서 바다 상태 데이터 (파고, 풍속 등)를 Pierson-Moskowitz 및 JONSWAP 스펙트럼에 적용하여 구현하였으며 해상 링크 품질을 통신거리와 비트 오율을 통해 분석하였다. 시뮬레이션 결과를 통하여 제안한 시스템은 국제항로표지협회의 해상 부표식에 충족하고, 고출력 LED를 사용하기 때문에 충분한 조명을 동시에 제공할 수 있는 효율적인 해상 가시광통신 기술임을 보여주고 있다.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1203-1209
• /
• 2010

신성장 동력 산업으로 분류된 LED 조명제품은 고효율 에너지 제품으로 기존 광원보다 조도가 높고 수명이 길어 많은 주목을 받고 있다. 본 연구에서는 기존의 할로겐 MR16 조명등이나 다수의 LED를 사용한 MR16 조명등을 대체할 단일 LED를 사용하는 MR16 조명등을 개발하고자 하였다. 이를 위해 LED 패키지 MCPCB 장착 기초 실험, 3차원 방열 수치해석 및 시제품에 대한 방열 성능실험을 수행하여 성공적으로 고출력 단일 LED MR16 조명등을 개발하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.303-304
• /
• 2005

In this paper, we report a fluxless eutectic die bonding process which uses 80Au-20Sn eutectic alloy. The chip LEDs are picked and placed on silicon substrate wafers. The bonding process temperatures and force are $305\sim345^{\circ}C$ and 10$\sim$100gf, respectively. The bonding process was performed on graphite heater with nitrogen atmosphere. The quality of bonding are evaluated by shear test and thermal resistance. Results of fluxless eutectic die bonding show that shear strength is Max. 3.85kgf at 345$^{\circ}C$ /100gf and thermal resistance of junction to die bonding is Min. 3.09K/W at 325$^{\circ}C$/100gf.

• 한국인터넷방송통신학회논문지
• /
• 제11권1호
• /
• pp.61-65
• /
• 2011

최근 액정디스플레이는 TV, Monitor, Note PC를 비롯한 모든 디스플레이영역에서 활발하게 사용되고 있다. 그러나, 액정디스플레이의 배경광원으로 사용하는 평판조명장치(백라이트)에서 주로 사용하는 광원인 CCFL(냉음극방전관)의 경우 수은 가스를 사용하기 때문에 저온 환경에서의 구동특성에 한계를 갖고 있다. 본 연구에서는 이러한 CCFL 광원이 갖고 있는 문제점을 해결하기 위해서, LED 광원을 사용한 백라이트 조명장치를 고안하고, -40도의 극저온환경에서의 동작특성을 CCFL 광원을 사용한 백라이트 조명장치와 비교분석하여, 저온환경에서의 LED 백라이트의 효용성에 대해서 연구하였다.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.94-105
• /
• 2016

The objective of the work was to evaluate the impact of lighting energy to cooling and heating consumption in medium scale office building, when currently installed fluorescent lights were replaced with various LED lighting fixtures. This evaluation comes from an integrated approach combining the proper indoor lighting environment and the thermal aspects of cooling & heating consumption in office building. These simulations were performed by coupling an appropriate luminaire analysis for energy consumption and a dynamic thermal simulation software (TRNSYS). To analyze comparative study of effects on the heating, cooling loads, and energy consumption of an LED lamp application, 2 types of LED lamp with low light power watt(LPW) 24W and high LPW 7.5W and a fluorescent lights(FL) with 37W are used respectively. Integrated building energy consumption decreased up to 3.2% when fluorescent lamps were replaced with LEDs. Thus, the high LPW of LED(7.5W) replaced with the same number of FL shows an effective energy saving and cost- effective luminary.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.106-111
• /
• 2024

A triboelectric nanogenerator is a promising energy harvester operated by the combined mechanism of electrostatic induction and contact electrification. It has attracting attention as eco-friendly and sustainable energy generators by harvesting wasting mechanical energies. However, the power generated in the natural environment is accompanied by low frequencies, so that the output power under such input conditions is normally insufficient amount for a variety of industrial applications. In this study, we introduce a non-contact rotational triboelectric nanogenerator using pedaling and gear systems (called by P-TENG), which has a mechanism that produces high power by using rack gear and pinion gear when a large force by a pedal is given. We design the system can rotate the shaft to which the rotor is connected through the conversion of vertical motion to rotational motion between the rack gear and the pinion gear. Furthermore, the system controls the one directional rotation due to the engagement rotation of the two pinion gears and the one-way needle roller bearing. The TENG with a 2 mm gap between the rotor and the stator produces about the power of 200 ㎼ and turns on 82 LEDs under the condition of 800 rpm. We expect that P-TENG can be used in a variety of applications such as operating portable electronics or sterilizing contaminated water.

• 한국컴퓨터정보학회논문지
• /
• 제21권5호
• /
• pp.127-133
• /
• 2016

In this paper, an intelligent dimming control system is designed and implemented with the human visual response function using CDS sensor, PIR sensor and temperature sensor, etc. The proposed system is designed to detect a moving object by PIR sensor and to control the LED dimming considering the human visual response. Also, the dimming of LED light can modulate on the app, and simultaneously control dimming in real-world environments with smart phone app. A high-temperature warning or a fire hazard information is transmitted to user's smart phone according to sensor values and Data graph are provided as part of data visualization. Connecting the hardware controller, the proposed intelligent smart dimming control system is expected to contribute to the power reduction interior LED, smart grid building and saving home combining with internet of things.

• 소성∙가공
• /
• 제21권2호
• /
• pp.131-137
• /
• 2012

With the advantages of power savings, increased life expectancy and fast response time over traditional incandescent bulb, LEDs are increasingly used for many applications including automotive, aviation, display, and special lighting applications. Since the high heat generation of LED chips can reduce service life, degrade luminous efficiency, and cause variation of color temperature, many studies have been carried out on the optimization of LED packaging and heat sinks. In this study, a fin expansion type cooling device using heat pipe, instead of a solid aluminum heat sink, was designed for LED security lightings based on thermal resistance analysis. Numerical analysis and experimental validation were carried out to evaluate its cooling performance.