• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.86-87
• /
• 2009

LED backlight for LCD TV is a great alternative to CCFL backlight due to its low power consumption and flexible arrangement. Various LED backlight configurations are being used to control the backlight locally in order to achieve both power efficiency and high contrast. However, the relatively small spatial resolution of the backlight system results in showing artifacts of backlight control that is acknowledgeable to human vision. Moreover, such artifacts get worse between temporal frames. In this paper we present a method of decreasing such temporal artifacts with a Human Visual System(HVS) approach to minimize distortion caused by local backlight dimming.

• KIEAE Journal
• /
• 제12권3호
• /
• pp.101-106
• /
• 2012

Lighting energy accounts for approximately 20% of the electrical energy used worldwide. Thus, High efficiency Light emitting diode(LED)lighting is getting more popular as the next generation lighting replaced to traditional lighting fixtures. Also, LED lighting not only has a long lifetime but also can realize a variety visual environments through the wavelengh control. The lighting energy varies depending on the Spectral Power Distribution(SPD) even though the Illuminance level is same. Therefore, This study indicates that the difference of indoor energy consumption under the same illuminance level when Spectral Power Distribution(SPD) is different. As a result, Lighting energy consumption under red-color emphasizing SPD is about 10% lower than under blue-color emphasizing SPDs.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1203-1209
• /
• 2010

신성장 동력 산업으로 분류된 LED 조명제품은 고효율 에너지 제품으로 기존 광원보다 조도가 높고 수명이 길어 많은 주목을 받고 있다. 본 연구에서는 기존의 할로겐 MR16 조명등이나 다수의 LED를 사용한 MR16 조명등을 대체할 단일 LED를 사용하는 MR16 조명등을 개발하고자 하였다. 이를 위해 LED 패키지 MCPCB 장착 기초 실험, 3차원 방열 수치해석 및 시제품에 대한 방열 성능실험을 수행하여 성공적으로 고출력 단일 LED MR16 조명등을 개발하였다.

• 한국광학회지
• /
• 제21권3호
• /
• pp.118-122
• /
• 2010

절연층이 부분 제거된 MCPCB에 기반을 둔 변화된 COB 개념의 고출력 LED 램프 구조를 제안하였다. 제안된 구조의 경우, LED 소자와 금속 base 사이에 절연층이 제거됨에 따라 칩으로부터 발생된 열이 기판의 금속 base로 손쉽게 방출된다. 그 결과 제안된 구조의 LED 램프는, 열 시뮬레이션은 물론 광출력 및 스펙트럼의 구동시간에 따른 변화 상에서도, MCPCB에 부착된 SMD형 LED 램프나 기존의 COB개념에 바탕을 두고 있는 LED 램프에 비해서도 우수한 열적특성을 갖는다는 것을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.940-941
• /
• 2015

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature $-20^{\circ}C$.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1101-1107
• /
• 2013

A light emitting diodes(LED) lighting has been increasingly used due to its low power consumption, long life time, high efficiency, and environment friendly characteristics. Also various power converters has been applied to drive these LED lighting. Among many power converters, a LLC resonant converter could be applied for LED lighting because of its high efficiency and high power density. Furthermore, the function of power factor correction(PFC) might be added. In this paper, 1-stage asymmetrical LLC resonant converter is proposed. The proposed converter performs both input-current harmonics reduction and PFC using the discontinuous conduction mode(DCM). The proposed 1-stage LLC resonant converter approach has the lower voltage stress across switching devices and achieve the zero voltage switching(ZVS) in switching devices. To verify the performance of the proposed converter, simulation and experimental results from a 300[W] prototype are provided.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.632-640
• /
• 2014

For low-power high-frequency LED driver applications in small form factor mobile products, a high-efficiency boundary conduction mode tapped-inductor boost converter is proposed. In the proposed converter, the switch and the diode achieve soft-switching, the diode reverse-recovery is alleviated, and the switching frequency is very insensitive to output voltage variations. The circuit is quantitatively characterized, and the design guidelines are presented. Experimental results from an LED backlight driver prototype for a 14 inch notebook computer are also presented.