• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.429-432
• /
• 2017

본 논문에서는 고성능 비교기를 이용한 전파정류 애너지 하베스팅 회로를 설계하였다. 설계된 회로는 크게 Negative Voltage Converter, Active Diode단으로 나뉜다. 그리고 Active Diode단에 포함된 비교기는 3-stage 형태로 구현 하였으며 Pre-amplification, Decision circuit, Output buffer단으로 나뉜다. 이 비교기는 Propagation delay를 줄이고 하베스팅 회로의 전압 및 전력 효율을 향상 시키는 것이 주된 목적이다. 제안된 회로는 Magna $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $612{\mu}m{\times}444{\mu}m$이다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권6호
• /
• pp.317-328
• /
• 2016

Over the past few decades, CMOS current comparators have been used in a wide range of applications, including analogue circuits, MVL (multiple-valued logic) circuits, and various electronic products. A current comparator is generally used in an ADC (analog-to-digital) converter of sensors and similar devices, and several techniques and approaches have been implemented to design the current comparator to improve performance. To this end, this paper presents a bibliographical survey of recently-published research on different current comparator topologies for low-power and high-speed applications. Moreover, several aspects of the CMOS current comparator are discussed regarding the design implementation, parameters, and performance comparison in terms of the power dissipation and operational speed. This review will serve as a comparative study and reference for researchers working on CMOS current comparators in low-power and high-speed applications.

• ETRI Journal
• /
• 제45권3호
• /
• pp.534-542
• /
• 2023

The large amount of secondary effects in complementary metal-oxide-semiconductor technology limits its application in the ultra-nanoscale region. Circuit designers explore a new technology for the ultra-nanoscale region, which is the quantum-dot cellular automata (QCA). Low-energy dissipation, high speed, and area efficiency are the key features of the QCA technology. This research proposes a novel, low-complexity, QCA-based one-bit digital comparator circuit for the ultra-nanoscale region. The performance of the proposed comparator circuit is presented in detail in this paper and compared with that of existing designs. The proposed QCA structure for the comparator circuit only consists of 19 QCA cells with two clock phases. QCA Designer-E and QCA Pro tools are applied to estimate the total energy dissipation. The proposed comparator saves 24.00% QCA cells, 25.00% cell area, 37.50% layout cost, and 78.11% energy dissipation compared with the best reported similar design.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.120-124
• /
• 2001

A new technique for improving the efficiency of single-phase high-frequency boost converter is proposed. This converter includes an additional low-frequency boost converter which is connected to the main high-frequency switching device in parallel. The additional converter is controlled at lower frequency. Most of the current flows in the low-frequency switch and so, high-frequency switching loss is greatly reduced accordingly Both switching device are controlled by a simple method; each controller consists of a one-shot multivibrator, a comparator and an AND gate. The converter works cooperatively in high efficiency and acts as if it were a conventional high-frequency boost converter with one switching device. The proposed method is verified by simulation. This paper describes the converter configuration and design, and discusses the steady-state performance concerning the switching loss reduction and efficiency improvement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.571-572
• /
• 2008

We propose a 4-bit 1.6GSample/s flash-A/D converter realized in a digital 0.18um 1-poly 4-metal CMOS technology. To achieve low power with good performance, we employ immanent C2MOS comparator scheme. The kickback noise is one of the most important issue in A/D comparator performance. To decrease the effect of kickback noise, here we introduce kickback neutralization technique. The designed A/D converter has an effective number of bits(ENOBs) of 3.93 while using 32mW operating at 1.6GHz.

• 센서학회지
• /
• 제26권4호
• /
• pp.223-227
• /
• 2017

Conventional CMOS image sensors (CISs) have a trade-off relationship between dynamic range and sensitivity. In addition, their sensitivity is determined by the photodiode capacitance. In this paper, CISs that consist of dual-sensitivity photodiodes in a unit pixel are proposed for achieving wide dynamic ranges. In the proposed CIS, signal charges are generated in the dual photodiodes during integration, and these generated signal charges are accumulated in the floating-diffusion node. The signal charges generated in the high-sensitivity photodiodes are transferred to the input of the comparator through an additional source follower, and the signal voltages converted by the source follower are compared with a reference voltage in the comparator. The output voltage of the comparator determines which photodiode is selected. Therefore, the proposed CIS composed of dual-sensitivity photodiodes extends the dynamic range according to the intensity of light. A $94{\times}150$ pixel array image sensor was designed using a conventional $0.18{\mu}m$ CMOS process and its performance was simulated.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1250-1259
• /
• 2012

본 논문에서는 저전압 고해상도 축차근사형 아날로그-디지털 변환기를 위한 시간-도메인 비교기를 제안한다. 제안하는 시간-도메인 비교기는 클럭 피드-스루 보상회로를 포함한 전압제어지연 변환기, 시간 증폭기, 그리고 바이너리 위상 검출기로 구성된다. 제안하는 시간-도메인 비교기는 작은 입력 부하 캐패시턴스를 가지며, 클럭 피드-스루 노이즈를 보상한다. 시간-도메인 비교기의 특성을 분석하기 위해 다른 시간-도메인 비교기를 가지는 두 개의 1V 10-bit 200-kS/s 축차근사형 아날로그-디지털 변환기가 0.18-${\mu}m$ 1-poly 6-metal CMOS 공정에서 구현된다. 11.1kHz의 아날로그 입력신호에 대해 측정된 SNDR은 56.27 dB이며, 제안된 시간-도메인 비교기의 클럭 피드-스루 보상회로와 시간 증폭기가 약 6 dB의 SNDR을 향상시킨다. 구현된 10-bit 200-kS/s 축차근사형 아날로그-디지털 변환기의 전력소모와 면적은 각각 10.39 ${\mu}W$와 0.126 mm2 이다.

• 한국전자통신학회논문지
• /
• 제14권3호
• /
• pp.529-536
• /
• 2019

스마트 센서 시스템에 압전 에너지 하베스터를 적용하기 위해서는 AC-DC 정류기를 비롯한 에너지 하베스트 인터페이스 회로가 필수적이다. 본 논문에서는 기본적인 회로인 Full Bridge Rectifier(: FBR) 회로와 동기식 압전 에너지 하베스트 인터페이스 회로의 성능을 보드레벨 시뮬레이션으로 비교하였다. 그 결과, 동기식 압전 에너지 하베스트 인터페이스 회로 중 하나인 Synchronous Electric Charge Extraction(: SECE) 회로가 FBR에 비해 출력 전력이 약 4 배 이상 더 컸고, 부하 변동에도 변화가 거의 없었다. 그리고, 출력 전압이 40V 이상인 압전 에너지 하베스터용 SECE 회로에 필수적인 고전압 비교기를 0.35 um BCD 공정으로 설계하였다. 설계한 고전압 비교기를 적용한 SECE 회로는 출력 전력이 FBR 회로 보다 427 % 향상됨을 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.57-66
• /
• 2019

This paper compared the performance with an overview of channel equalization techniques used in high-speed serial transceivers, including the homogeneous architecture and associated components for the GHz interconnect of backplane and cable channels. It also used the MATLAB tool to present system analysis and simulation results for continuous time equivalent structures. In the case of conventional continuous equalization, high frequency deficits occur due to the use of a comparator that is difficult to implement as well as the low speed limit. In this paper, the channel equalization technique based on the power spectrum analysis of clocks was used to compensate for the frequency loss, and the application of the TX+Channel and TX+Equalizer filters enabled the measurement of attenuation and equivalence without comparators. The application of blender and band-pass filters at high speeds also showed significant effectiveness.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.194-199
• /
• 2012

This paper proposes a novel scheme of a gray scale fingerprint image for a high-accuracy capacitive sensor chip. The conventional grayscale image scheme uses a digital-to-analog converter (DAC) of a large-scale layout or charge-pump circuit with high power consumption and complexity by a global clock signal. A modified capacitive detection circuit for the charge sharing scheme is proposed, which uses a down literal circuit (DLC) with a floating-gate metal-oxide semiconductor transistor (FGMOS) based on a neuron model. The detection circuit is designed and simulated in a 3.3 V, 0.35 ${\mu}m$ standard CMOS process. Because the proposed circuit does not need a comparator and peripheral circuits, the pixel layout size can be reduced and the image resolution can be improved.