• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.48-53
• /
• 2000

The novel integration method with programmable high-pass filter is suggested in order to solve the problem of integration for stator flux estimation in a stator flux oriented direct vector controlled induction motor drive system. The dc offset in a pure integrator is eliminated using high-pass filter with fixed time constant, and then time constant of programmable high-pass filter is controlled with a inverter frequency for integration in a wide frequency range, considering phase lag and attenuation due to both the hardware low-pass filter and high-pass filter. The proposed method is verified with the experimental results implemented by 32-bit DSP.

• 대한전자공학회논문지TC
• /
• 제46권5호
• /
• pp.162-167
• /
• 2009

본 논문에서는 대역통과 여파기와 저역통과 여파기를 하나의 구조로 합성하여 크기 증가 없이 초광대역 특성을 가지는 여파기를 설계 및 구현하였다. 제안한 구조는 그 구조가 간단하다. 그리고 저역 통과 특성을 얻기 위하여 이미 잘 알려진 DGS(Defected Ground Structure) 구조를 이용하였다. 기존의 대역통과 여파기와 저역통과 여파기를 직접 연결하였을 때 보다 크기를 줄일 수 있었다. 측정결과 통과대역은 $2.1GHz{\sim}10.56GHz$이고 삽입손실은 최대 0.5dB, 반사손실은 최소 20dB, 군 지연은 $0.13ns{\sim}0.35ns$ 까지 최대 변화폭 0.23ns의 변화를 보인다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.193-196
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.898-904
• /
• 2017

DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.157-159
• /
• 2010

대부분의 디지털 촬영 장치는 Charge Coupled Device(CCD) 또는 Complementary Metal Oxide Semiconductor(CMOS) 센서를 사용한다. 이러한 센서를 통해 촬영된 영상 정보에는 원하지 않는 잡음이 포함되어있다. 본 논문은 영상의 잡음 제거 및 영상 정보의 회복을 위한 기법인 잡음 제거(Noise Reduction, NR)에 관한 것이다. 제안한 NR 방법은 저역통과 필터(Low Pass Filter, LPF)의 대역폭을 고려한 잡음 제거 방법에 관한 것으로, NR의 성능개선을 위하여 MSF 연산에 사용되는 LPF의 필터 계수를 통한 시뮬레이션을 수행하였다. 필터 계수가 갖는 주파수 대역폭의 특성을 고려한 시뮬레이션 결과, MSF 연산에 적용되는 LPF와 고역통과 필터(High Pass Filter, HPF)의 필터 계수가 [1 2 1]과 [-1 2 -1]인 경우 가장 이상적인 주파수 대역폭을 나타내며, NR의 성능 또한 우수함을 확인하였다. 시뮬레이션 결과를 통하여, MSF를 수행함에 있어서 LPF와 HPF의 필터 계수를 [1 21]과 [-1 2 -1]로 제안하였다.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 한국방사선학회논문지
• /
• 제8권6호
• /
• pp.301-307
• /
• 2014

본 연구에서는 DSA 장치에 의하여 획득된 영상을 고역 통과 필터링 알고리즘을 구성하여 구성된 알고리즘으로 실험을 하여 혈관조영상의 화질을 개선하는 방안을 제안하였다. 고역 통과 필터(High Pass Filter)는 고주파 성분은 통과시키고 저주파 성분은 차단하는 필터이다. 의료영상에서 고주파 성분은 장기(organ)의 윤곽이나 경계선 부분이 고주파 성분에 해당된다. 따라서 고역 통과 필터는 경계선 검출에도 쓰이지만 고역 강조를 위해서도 이용된다. 제시한 알고리즘으로 분석을 하여 혈관조영상의 화질을 개선할 수 있었다. 목적부위의 표현이 확연하게 두드러짐을 알 수 있었다. 제안된 방안을 이용한다면 DSA 시스템의 화질을 개선하는 소프트웨어에 적용하여 오진을 줄여주고 시술의 정확도를 더욱 높여 줄 수 있을 것이라 사료된다.

• 대한통합의학회지
• /
• 제8권2호
• /
• pp.131-138
• /
• 2020

Purpose : The purpose of this study was to investigate the effects of the frequency band pass filter on the P300 event-related potential in the working memory. Methods : The subjects were 20 women in their 20s who applied for participation in the experiment. Event-related potentials (ERPs) were elicited using 3-back tasks for the working memory, and were recorded from Fz, Cz, and Pz scalp electrodes. The high-pass filters were set to 0.01, 0.1, and 0.3 Hz for analysis purposes, and the low-pass filters were set to 30 and 15 Hz. The 3-back task was presented for a total of 100 times, among which 30 times were designated for the target stimulation (a matched number) and 70 times for the non-target stimulation (an unmatched number). The temporal interval between each stimulation was set at 1 second, while each time duration was randomly presented between 2 to 4 seconds. ERP were analyzed for the P300 recorded from Fz, Pz and Cz scalp electrodes. Results : Latency and amplitude had no significant interaction effects in both the high- and low-pass filters. For the main effects, the latency and amplitude of the P300 event-related potential had no significant difference in the high-pass filters, but the latency had a significant difference in the low-pass filter of Fz, and the amplitude had a significant difference in the low-pass filter of Pz. Conclusion : The results of this study showed that the less than 0.3 Hz high filters had no effects on the differences between the latency and amplitude of the P300 event-related potential in the working memory. The 30Hz low-pass filter, however, was found to be useful for recording the P300 event-related potential in the working memory.

• 한국전자통신학회논문지
• /
• 제5권2호
• /
• pp.180-184
• /
• 2010

본 논문에서는 다중 채널 심장 전기도 주 증폭기의 중요한 부분인 필터를 설계하고 시뮬레이션을 통하여 성능을 분석하였다. 주 증폭기는 샘플/홀더, 가변 고역통과 필터, 노치 필터, 가변 저역통과 필터로 구성된다. 필터는 기존의 64 채널의 공간 분해능을 향상시키기 위하여 128채널을 고려하여 설계되었다.