• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1126-1131
• /
• 2010

Experimental studies for the high damping rubber bearing, lead rubber bearing and natural rubber bearing, those are often used to improve the seismic capacity if the structure recently, are conducted to evaluate the seismic capacity of the seismic isolation bearings. The shear stiffness of the bearings decrease and the shear strain amplitude or the constant axial load level increase, but not sensitive to the strain rate effect. Bearings are strong for the axial compression but weak for the axial tension.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.93-96
• /
• 2008

A transmitter (TX) leakage cancellation scheme using a Micro Controller Unit (MCU) is introduced. This paper highlights an adaptive anti-leakage signal generation via an MCU, which plays the key role in reducing the TX leakage signal level. High transmitter-to-receiver (TX-to-RX) isolation is verified with measurement results.

• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.93-98
• /
• 2013

본 논문에서는, 초고집적과 초고내압 MOSFET를 위한 높은 임계전압에서 제안한 구조의 얕은 트랜치 접합 격리 구조에 대한 시뮬레이션 하였다. 열전자 스트레스와 열 손상의 유전 강화 전계의 물리적 기본 모델들은 주위 온도와 스트레스 바이어스의 넓은 범위에 걸친 집적화된 소자들에 있어서 분석하는 전기적의 목표인 TCAD 툴을 이용하였다. 시뮬레이션 결과, 얕은 트랜치 접합 격리 구조가 수동적인 전기적 기능 일지라도, 소자의 크기가 감소됨에 따라서, 초대규모 집적회로 공정의 응용에서 제안된 얕은 트랜치 격리 구조가 전기적 특성에서 전위차, 전계와 포화 임계 전압이 높게 나타났다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.1-6
• /
• 2001

In this article, the fundamental concept, characteristics and application potentials of coreless printed-circuit-board (PCB) transformers are described. Coreless PCB transformers do not have the limitations associated with magnetic cores, such as the frequency limitation, magnetic saturation and core losses. In addition, they eliminate the manual winding process and its associated problems, including labor cost, reliability problems and difficulties in ensuring transformer quality in the manufacturing process. The parameters of the printed windings can be precisely controlled in modern PCB technology. Because of the drastic reduction in the vertical dimension, coreless PCB transformers can achieve high power density and are suitable for applications in which stringent height requirements for the circuits have to be met. A transformer's power density of $24W/cm^2$ has been reported in a power conversion application. When used in an isolation amplifier application, coreless PCB transformers tested so far enable the amplifier to achieve a remarkable linear frequency range of 1MHz, which is almost eight times higher than the frequency range of 120kHz in existing Integrated-Circuit products. PCB materials offer extremely high isolation voltage, typically from 15kV to 40kV, which is higher than many other isolation means such as optocouplers. It is envisaged that coreless PCB transformers can replace traditional core-based transformers in some industrial applications. Their application potentials deserve more attention and exploration.

• 한국전자파학회논문지
• /
• 제14권1호
• /
• pp.47-53
• /
• 2003

본 논문에서는 동일 편파 특성과 높은 격리도 특성을 갖는 이중 대역 소형 평면 패치 안테나를 제안하였다. 안테나의 크기를 줄이기 위해 고유전율의 유전체를 사용하였으며, 대역폭 확장을 위해 급전부에 개방스터브를 부착하였다. 크기가 4 mm${\times}$3 mm${\times}$5 mm 인 최적화된 안테나는 VSWR$\leq$ 2를 기준으로 5.6 GHz 대 역과 5.8 GHz 대역에서 각각 3.0 %와 2.8 %의 대역폭을 가졌고, 격리도 특성은 두 대역에서 평균적으로 -26 dB 이하를 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.28-33
• /
• 2013

This paper proposes a miniaturized high-isolation diversity antenna for wearable wireless body area network (WBAN) applications. An inverted-F type radiating element is used to reduce the overall dimension of the proposed antenna to $30mm{\times}30mm{\times}2.5mm$. The antenna performance on the human body phantom is analyzed through simulation and the performance of the fabricated antenna is verified by comparing the measured data with that of the simulation when the antenna is placed on a semi-solid flat phantom with equivalent electrical properties of a human body. The fabricated antenna has a 10 dB return loss bandwidth over the Industrial Scientific Medical (ISM) band from 2.35 GHz to 2.71 GHz and isolation is higher than 28 dB at 2.45 GHz. The measured peak gain of antenna elements # 1 and # 2 is -0.43 dBi and -0.54 dBi, respectively. Performance parameters are analyzed, including envelope correlation coefficient (ECC), mean effective gain (MEG), and the MEG ratio. In addition, the specific absorption ratio (SAR) distributions of the proposed antenna are measured for consideration in use.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.709-715
• /
• 2002

본 연구에서는 직접적인 급전방식인 마이크로스트립 급전과 H-shaped 개구 결합 급전을 이용해 마이크로스트립 안테나에서 최대 송수신간 전력간섭을 억제하여 송수신 분리 구현이 가능한 높은 격리도 특성을 가지면서도 최소의 기판 층 사용 및 쉬운 급전을 할 수 있는 새로운 구조의 이중급전 이중편파 안테나를 제시하고 실험을 통한 타당성을 보였다. 제안된 단일 안테나와 1$\times$4 배열 안테나의 측정된 격리도는 -49 dB와 -48 dB이하의 특성을 가졌고, 측정된 임피던스 대역폭(VSWR<1.5)은 중심 주파수 12.5 GHz에서 4 %, 중심 주파수 14.25 GHz에서 2.1 %를 보였으며, 최대 이득은 8.25 dBi와 14.2 dBi로 측정되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.618-623
• /
• 2001

In a practical vibration isolation system, vibration is transmitted from the source to the receiver through several paths such as more than one inter-connected point and multi-degree of freedom at each connection point. Therefore, the major path investigation for vibration transmission among them is often required in a point of view of isolation. For the path analysis of multi-dimensional vibration isolation system, it is useful to employ the concept of vibration power in high frequency range where radiation of noise from the receiver structure is concerned. The idea is simple to understand and formulate but rather complicated to apply in practice. For an accurate estimation of power flow especially over a high frequency range, it is well known in theory that rotational motions should be taken into consideration together with translational motions at inter-connected points. In reality, however, power transmissions related to rotational terms are often neglected mainly due to difficulties in the instrumentation. In this paper, necessary formula and measurable mechanical quantities for vibration power analysis will be reviewed and experimental results with rotational terms included for compressor system in a commercial air conditioner will be shown.

• Applied Biological Chemistry
• /
• 제23권4호
• /
• pp.206-210
• /
• 1980

인삼(人蔘)사포닌중 소미량성분인 $ginsenoside-Rf,\;-Rg_2$ 및 $-Rh_1$을 조제용(造製用), 준조제용(準造製用) 및 분석용(分析用) HPLC를 사용(使用)하여 분리(分離)하였다. 본(本) 방법(方法)은 신속하며 이들 소미량 ginsenoside의 분리(分離) 및 동정(同定)에 매우 유효(有效)하였으며 재(再)순환 방식을 사용하여 달성되었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권2호
• /
• pp.239-246
• /
• 2019

Teenagers in multicultural families are more prone to depression and problem behaviors caused by violence such as bullying in schools due to their appearance, language presentation skills, and poor learning abilities compared to teenagers in general families. This study is meaningful in that it provides basic information for prevention measures in intervening with damage caused by school violence such as depression, anxiety, suicidal impulses and emotional and social. For this purpose, a survey of 300 elementary school students from 4 to 6 grade, junior high school, and high school students was conducted. A total of 400 questionnaires were distributed and of thos e 385 were used for the final analysis. The results of the study are as follows. First, the psychological factors of suicidal ideation were higher in the victimized group than school violence. Second, there was a significant difference in the relationship between emotional - social isolation and school violence experience. Third, there was a significant difference in the relationship between experience of suicide ideation and depression as well as anxiety of emotional - social isolation with psychological maladjustment. In conclusion, we plan to find ways to stabilize the multicultural society by providing prevention and protection measures against school violence.