• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.373-396
• /
• 2015

This study analyzed the determinants of high-growth firms using the technology appraisal data of the Korea Technology Finance Corporation. This study is differentiated from previous studies for three reasons. First, it analyzed the determinants of firms that will grow into high-growth firms in the future, not the characteristics of current high-growth firms. Second, it analyzed high-growth firms by dividing them in two aspects: sales and employment. In other words, they were divided into three types: the case in which a firm achieves high growth in both sales increase and creation of jobs, the case in which a firm achieves high growth in creation of jobs but low growth in sales increase, and the case in which a firm achieves high growth in only sales increase but low growth in creation of jobs. Third, this study applied the technology appraisal indicators of Kibo Technology Rating System(KTRS) by the Korea Technology Finance Corporation as the explanatory variable. As a result of analysis, it was found that a firm achieved high growth in both sales and employment if the position in the technology life cycle was appropriate and the technology readiness level was high. However, it turned out that the management system of technical manpower had conflicting effects on high growth of employment and sales. In other words, a firm that had well managed its technical manpower achieved high growth in terms of employment, but rather showed low growth in terms of sales. This result suggests the inference that firms showing high growth in employment may appear mainly in the high-tech industry where management of technical manpower is important. Accordingly, as a result of adding dummy variables that represent whether or not firms are in the high-tech industry, it was found that the result supported the inference, as firms in the high-tech industry were highly likely to achieve high growth in employment.

• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.95-114
• /
• 1991

This paper was designed to estimate the interaction of the first productivity, light conditions and to analyze the ecophysiological productivity, growth characteristics grown under various shading conditions in Zoysia japonica . The results summarized this experiment were as follows; 1.After transplanting the grass, increasing rate of leaf number and total leaf length was remarkahly high at the early growth stage in the control and the 30% shading plot. 2.The increasing rate of leaf area ratio (LA R) in all the experimental plot was remarkable high at the early growth stage after transplanting the grass. Especially, the control and 30% shading plot in compared with another plots, were remarkably high at rate of leaf area. 3.The length and the node number of rhizome in the control and 30% shading plot were also high and the difference was significantly large by the growth stage. 4.Chlorophyll content was very high at 36days after transplanting and then decreased. Increasing rate of shade resulted in its low content. The rate of chlorophyll a to b was decreased by in-creasing rate of shade. 5.The content of soluble sugar in the control and 30% shading plot was low at the early growth after transplanting and high at the late growth stage. Its content in the plot of 70% shading was remarkably low throughout the growth stage. 6.The increasing rate of standing plant in all the experimental plots was high at the early growth stage after transplanting. Increasing rate of shade was typically low through all the growth stage.

• Korean Journal of Organic Agriculture
• /
• v.12 no.4
• /
• pp.437-450
• /
• 2004

This study was conducted with two objectives ; one was to select the suitable soybean cultivars for cultivation in paddy field and the other was to establish the environment-friendly rotational cropping system of soybean instead of rice in paddy field. In order to evaluate growth adaptation and yields, Eve soybean cultivars were cultivated in Yeoncheon, Keonggi province, with two cultivation methods such as level row and high ridge. Growth of the top plants, such as stem length, number of branches, diameter of stem, were higher in high ridge than in level row, however, the differences among the cultivars were bigger than those between the cultivation methods. Dry weight of top plant was significantly different among the cultivars during whole growth stages, however, it was higher in level row than in high ridge at V5 stage while it became higher in high ridge as growth progressed. Roots were more developed in high ridge than in level row during whole growth stages. T/R ratio in level row was higher than that in high ridge. During whole growth stages, significant differences were observed among the cultivars in growth and yields in each cultivation method and yields of Eunhakong was the highest. In results, number of nodules and T/R ratio at V5 stage, number of pods at R2 stage, and number of seeds and T/R ratio at R5 stage had highly correlated with yields, respectively.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.51-67
• /
• 1999

The growth of crystals with high melting points tfus$\geq$1$600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with tfus》1$600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, any oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure pO2. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and ways to forecast their behavior under growth conditions.r growth conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.360-364
• /
• 1999

The growth of crystals with high melting point$t_{fus}$$\geq$$1600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with$t_{fus}$$1600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, many oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure${po}_{2}$. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and wasy to forecast theri behavior under growth conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.323-327
• /
• 2002

Plant growth and the two components of respiration, growth and maintenance, were compared between low and high nitrogen applications in hydroponic culture on a high-yielding rice cultivar 'Takanari' (Oryza sativa L.). Grain yield decreased by high nitrogen application, and thus this cultivar has low adaptability to nitrogen. Growth efficiency (GE) and net assimilation rate (NAR) were lower in the high-nitrogen plot. The maintenance coefficient (m) and growth coefficient (g) of dark respiration were 0.0111 $d^{-1}$ and 0.196 in the low-nitrogen plot and 0.0166 $d^{-1}$ and 0.237 in the high-nitrogen plot, respectively. Thus, high nitrogen application increased both g and m. Calculated $R_m$ (maintenance respiration rate) was 70 and 90% of total respiration rate at heading, respectively. The significance of nitrogen adaptability and g was discussed.

• Plant Resources
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2002

The heading date is known to be controlled by two kinds of genetic constituent, photosensitivity and basic vegetable phase. For the latter, the effect of temperature in early growth period is critical to determine the shortness of vegetative growth periods in plant's life. A phytotron experiment on 55 rice cultivars, consisting of two ecotypes of rices, indica and japonica, was conducted at high and low temperature treatments at early growth stage to investigate the possible role of plant growth stimulus by high temperature to associate with shortening of heading date. The high temperature during the early growth stage stimulated the rice growth as measured by plant height with much difference of the growth response between indica and japonica. The conclusive finding that these growth stimulus in early growth stage was highly correlated with the acceleration of heading is, more or less, correlated with the heading of the late growth stage although we could not conclude the genes for early plant growth stimulus by high temperature is the same genes as the genes for accelerating of heading in the late growth stage of plants.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.1
• /
• pp.28-49
• /
• 2019

This paper explores the characteristics of innovation activities in high growth firms that contribute to national and regional economic growth and job creation. The analysis is based on the 2016 KIS data to analyze the difference in innovation activities between high growth firms and general firms. The main results are as follows: First, high growth firms have a higher proportion of R&D personnel than general firms. Second, high growth firms are actively introducing product innovation, process innovation, and organizational innovation as compared to general firms. In the innovation activities related to product innovation and process innovation, there is no statistically significant difference between high growth companies and general companies except for external R&D. Third, High growth firms are more likely to cooperate with other technology partners than general firms. But, there is no statistically significant difference between high growth firms and general firms in the external knowledge search and the diversity of cooperating partners. Fourth, in terms of protecting innovation, high growth firms are more likely to use all kinds of innovation protection method, such as 'utilizing intellectual property rights', 'maintaining confidentiality', 'adopting complex design methods', 'market preemption ahead of competitors', and the most important means is the intellectual property rights. Fifth, government innovation policies that high growth firms chose as important are 'innovation subsidies and loans', 'acquirement, utilization and protection of intellectual property rights' and 'human resource support'.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.136-140
• /
• 2002

High temperature fatigue crack growth behavior of P92 and STS 316L steel were investigated under four load conditions using CT type specimens. Loading and unloading times for the low wave forms were combinations of 1 sec. and 50 sec., which were two symmetric wave forms and two unsymmetric wave forms. Their behaviors are characterized using ΔK parameter. In STS 316L, Crack growth rate generally increases as frequency decreases. However, sensitivity of the loading rate to crack growth rate was fecund to be far greater than that of the unloading time. It is because as loading time increases, creep occurs at crack tip causing the crack growth rate to increase. However creep does not occur at the crack tip even if the unloading time is increased. In P92 steel, crack growth rate showed same behavior as in STS 316L. But the increase in loading or unloading time made almost no difference in crack growth rate, suggesting that no significant creep occurs in P92 steel even though loading time increases. After conducting high temperature tensile tests and comparing high temperature fatigue crack growth rates under various wave forms, it was proved that P92 steel has not only good high temperature properties but also improved, better high temperature fatigue properties than STS 316L.