• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.56-63
• /
• 2024

In high radiation fields, gamma cameras suffer from pulse pile-up, resulting in poor energy resolution, count losses, and image distortion. To overcome this problem, various methods have been introduced to reduce the size of the aperture or pixel, reject the pile-up events, and correct the pile-up events, but these technologies have limitations in terms of mechanical design and real-time processing. The purpose of this study is to develop a real-time gamma camera to evaluate the radioactive contamination in high radiation fields. The gamma camera is composed of a pinhole collimator, NaI(Tl) scintillator, position sensitive photomultiplier (PSPMT), signal processing board, and data acquisition (DAQ). The pulse pile-up is corrected in real-time with a field programmable gate array (FPGA) using the start time correction (STC) method. The STC method corrects the amplitude of the pile-up event by correcting the time at the start point of the pile-up event. The performance of the gamma camera was evaluated using a high dose rate ¹³⁷Cs source. For pulse pile-up ratios (PPRs) of 0.45 and 0.30, the energy resolution improved by 61.5 and 20.3%, respectively. In addition, the image artifacts in the ¹³⁷Cs radioisotope image due to pile-up were reduced.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

This paper studies relationship between typhoon and El Ni$\tilde{n}$o La Ni$\tilde{n}$a events by using 25 years meteorological data of KMA and JMA. The results are listed below. Annual mean number of typhoon's occurrence in El Ni$\tilde{n}$o event year is 23.9, and that in La Ni$\tilde{n}$a event year is 24.9. The number of typhoon's occurrence decreases in El Ni$\tilde{n}$o event year. Mean central minimum pressure and mean maximum wind speed in El Ni$\tilde{n}$o event year are 959.3hPa and 35.8m/s, and those in La Ni$\tilde{n}$a event year are 965.5hPa and 33.7m/s respectively. Intension of typhoon is stronger in El Ni$\tilde{n}$o event year than La Ni$\tilde{n}$a event year. To be more specific mean central minimum pressure is lower 6.2hPa and mean maximum wind speed is stronger 2.1m/s. This result is closely connected with sea area of typhoon's occurrence. Typhoons in El Ni$\tilde{n}$o event year are more likely to occur in east of 150E and south of 10N, but those in La Ni$\tilde{n}$a event year are more likely to occur in 120-150E and north of 20N. Typhoons which occur in east of 150E and south of 10N can be stronger because the typhoons move in broad sea area of high sea surface temperature in western North Pacific.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.443-445
• /
• 2002

In this paper, we present a novel efficient semaphore implementation scheme which diminishes completion time of high priority tasks and improves reliability of a system. The real-time system is constrained to complete their tasks in time. Especially, the task of a hard real-time system must meet its deadline under unfavorable conditions. In this paper, the number and sort of the locked semaphores, when an event occurred, decide whether the context switch should occur or not, so higher priority tasks diminish in their completion time. The experimental results show that the proposed method gives performance improvements in finish time of high priority tasks of about 11% over the Zuberi.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.175-190
• /
• 1997

Organizational change projects such as Business Process Redisign (BPR) have been perceived to incur high risk due to their high management complexity, enterprise-wide impace, and steep project cost. This research intends to reduce such risk by developing a systematic process redesign methods, called Dynamic Process Modeling (DPM) method. DPM integrates the customer-oriented business process modeling technique with computerized visual simulation technique to promote better understanding of the target process and enable performance simulation of the proposed redesign alternatives prior to actual BPR implementations. For the cusstomer-oriented process modeling, we propose Dynamic-Event Process Chain (Dynamic-EPC) extending from the conceptual customer process model, Event-Process Chain (EPC). We compare DPM with four other implementation-level process modeling methods over eight criteria and demonstrate its effectiveness by applying it to the real-world hospital BPR case.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.311-313
• /
• 2002

We are under development of a 3D PET scanner with depth of interaction (DOI) capable of high sensitivity and high resolution. In this scanner, a maximum data transfer rate of coincidence pair's event information is 10 Mcps and one event is a 64-bit data format. This maximum data transfer rate corresponds by 10 times a conventional PET scanner. A data acquisition system, which fulfills the specification of this scanner, is considered for parallel collection with banks including several coincidence units. Data transfer rate is improved by optimizing parameters of a message size, and so on.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.167-175
• /
• 2000

Work performance and human error are complicated phenomena so that it is very difficult to grasp the true nature of them. However, Event Related Potential (ERP) may give a clue to them because human brain reflects diverse psychophysiological process. In the present study, the possibility of ERP application to the ergonomic area was evaluated in view of grasping error symptoms. For that purpose, the subjects were asked to count specific characters in a random character matrix on a computer monitor, and their ERP was compared with their performance data. Based upon the results, the amplitude of P300 was not so high as that in the case of the Odd Ball tasks, correct response corresponded with stable ERP with high P300 amplitude whereas wrong response did with unstable, fluctuating ERP with low P300 amplitude. Those results coincided with the work performance, and it was concluded that 3-wave fluorescent with illumination level of 800 lux would be recommendable for the counting task in concern. Conclusively, ERP including P300 might supply an objective clue to the problem of human errors in cognitive process.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.4
• /
• pp.10-16
• /
• 2012

This study presents the effectiveness of a composite structure at improving blast resistance. The proposed composite structure consists of carbon fiber reinforced polymer (CFRP) and steel layers. While CFRP layer is used for blast energy reflection due to its high strength, steel layer is used for blast energy absorption due to its high ductility. A dynamic model is used to simulate the elastoplastic behavior of the proposed composite structure subject to blast load. Considering the magnitude variations of a blast event, the probability of failure of each layer is evaluated using reliability analysis. By assigning design probability of failure of each layer in the composite structure, the thickness of layers is optimized. A case study for the design of CFRP-steel composite structure subjected to an uncertain blast event is also presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2415-2421
• /
• 1996

This paper describes implementation and performance evaluation of XTP(Xpress Transport Protocol) onthe Windows NT for multicasting in high-speed communication networks. We designed the protocol byan event-driven method and implemented it in form of network driver in a kernel for performace enhancement. Various applications program are used for its functional test and comparison with the TCP protocol.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.72-76
• /
• 2005

This event recorder system, owing to the advancement of communication technology, is independently installed in most on-board electronics and given integrated management by on-board monitoring equipments. However, since the safety oriented equipments such as signalling devices, train protection systems, and train radios have been mounted on trains recently" the existing on-board monitoring device is no longer reliable enough for permanent preservation of data from train crashes or fires. This study has pointed out the problems mentioned above and described the designing concept of the fault recording system for high-speed trains for effective utilization of the train management program.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.211-227
• /
• 2012

To implement a combined discrete event and discrete time simulation such as submarine diving simulation in a distributed environment, e.g., in the High Level Architecture (HLA)/Run-Time Infrastructure (RTI), a HLA interface, which can easily connect combined models with the HLA/RTI, was developed in this study. To verify the function and performance of the HLA interface, it was applied to the submarine dive scenario in a distributed environment, and the distributed simulation shows the same results as the stand-alone simulation. Finally, by adding a visualization model to the simulation and by editing this model, we can confirm that the HLA interface can provide user-friendly functions such as adding new model and editing a model.