• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.157-158
• /
• 2013

Organic solar cell was fabricated using one-pot deposition of a mixture of NiO nanoparticles, P3HT and PCBM. In the presence of NiO, the photovoltaic performance was slightly increased comparing to that of the device without NiO. When $TiO_2$ thin films with a thickness of 2~3 nm was prepared on NiO nanoparticles using atomic layer deposition, the power conversion efficiency was increased by a factor 2.5 with respect to that with bare NiO. Moreover, breakdown voltage of the film consisting of NiO, P3HT, and PCBM on indium tin oxide was increased by more than 1 V in the presence of $TiO_2$-shell on NiO nanoparticles. It is evidenced that S atoms of P3HT can be oxidized on NiO surfaces, and $TiO_2$-shell on NiO nanoparticles. It is evidenced that S atoms of P3HT can be oxidzed on NiO surfaces, and $TiO_2$ shell heavily reduced oxidation of S at oxide/P3HT interfaces. Oxidized S atoms can most likely act as carrier generation sites and recombination centers within the depletion region, decreasing breakdown voltage and performance of organic solar cells. Our result shows that fabrication of various core-shell nanostruecutres of oxides by atomic layer deposition with controlled film thickness can be of potential importance for fabricating highly efficient organic solar cells.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2020

Social infrastructure facilities that have been under construction since the country's high-growth period are undergoing rapid aging, and, thus, safety assessments of large structures such as bridge tunnels, which can be directly linked to large-scale casualties in the event of an accident, are necessary. It is difficult to construct economical and efficient wireless smart sensor networks that improve structural health monitoring (SHM) because the existing wire sensors have a short signal reach. However, low-power wide-area networks (LPWANs) are becoming popular within the Internet of Things, and enable economical and efficient SHM. In this study, the technology trends of a wireless measuring sensor based on LoRa LPWANs were investigated, and an installation and maintenance plan for this type of sensor is proposed.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1505-1514
• /
• 2004

Sequence matching in time-series databases is an operation that finds the data sequences whose changing patterns are similar to that of a query sequence. Typically, sequence matching hires a multi-dimensional index for its efficient processing. In order to alleviate the dimensionality curse problem of the multi-dimensional index in high-dimensional cases, the previous methods for sequence matching apply the Discrete Fourier Transform(DFT) to data sequences, and take only the first two or three DFT coefficients as organizing attributes of the multi-dimensional index. This paper first points out the problems in such simple methods taking the firs two or three coefficients, and proposes a novel solution to construct the optimal multi -dimensional index. The proposed method analyzes the characteristics of a target database, and identifies the organizing attributes having the best discrimination power based on the analysis. It also determines the optimal number of organizing attributes for efficient sequence matching by using a cost model. To show the effectiveness of the proposed method, we perform a series of experiments. The results show that the Proposed method outperforms the previous ones significantly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.871-874
• /
• 2007

Stream data need a efficient data management with high reliability and real time processing. The characteristics of these data are a large volume, a short report interval and asynchronous report time. The typical queries of these systems consist of the current query to search the latest signal value, the snapshot query to search the signal value of a past time, the historical query to search the signal value of a past time to current. This paper proposes the efficient method to manage the above signals by using a file structured database in QNX operating systems. The query model to accommodate various query for stream data is proposed. The proposed methods are applied to reactive protection system to verify their usefulness. The COM(Cabinet Operator Module) based on the QNX employs file database that adopts a delta version and a buffering method for the resource limit of a small storage and a low computing power.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.69-80
• /
• 2010

Wireless sensor networks (WSN) consisting of a large number of sensors aim to gather data in a variety of environments and are being used and applied to many different fields. The sensor nodes composing a sensor network operate on battery of limited power and as a result, high energy efficiency and long network lifetime are major goals of research in the WSN. In this paper we propose a novel tree-based clustering approach for energy efficient wireless sensor networks. The proposed scheme forms the cluster and the nodes in a cluster construct a tree with the root of the cluster-head., The height of the tree is the distance of the member nodes to the cluster-head. Computer simulation shows that the proposed scheme enhances energy efficiency and balances the energy consumption among the nodes, and thus significantly extends the network lifetime compared to the existing schemes such as LEACH, PEGASIS, and TREEPSI.

• Journal of Digital Contents Society
• /
• v.11 no.1
• /
• pp.91-97
• /
• 2010

Flash memory has been used by many digital devices for data storage, exploiting the advantages of non-volatility, low power, stability, and so on, with the help of high integrity, large capacity, and low price. As the fast growing popularity of flash memory, the density of it increases so significantly that its entire address mapping table becomes too big to be stored in SRAM. This paper proposes the associated page address cache with an efficient table management scheme for hybrid flash translation layer mapping. For this purpose, all tables are integrated into a map block containing entire physical page tables. Simulation results show that the proposed scheme can save the extra memory areas and decrease the searching time with less 2.5% of miss ratio on PC workload and can decrease the write overhead by performing write operation 33% out of total writes requested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.257-260
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm“Rijndael”. To achieve high throughput rate, a sub-pipeline stage is inserted into the round transformation block, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. For area-efficient and low-power implementation the round transformation block is designed to share the hardware resources in encryption and decryption. An efficient scheme for on-the-fly key scheduling, which supports the three master-key lengths of 128-b/192-b/256-b, is devised to generate round keys in the first sub-pipeline stage of each round processing. The cryptoprocessor designed in Verilog-HDL was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}{\textrm}{m}$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.421-427
• /
• 2013

Disk Cache Manager(DCM), a functional server of microkernel based, to improve the I/O power of shared disks is designed and implemented in this work. DCM interfaces other different servers with message passing through ports by serving as a system actor the multi-thread mode on the Minix3 micro-kernel. DCM proposed in this paper uses the shared disk logically as a Seven Disk and Sodd Disk to enable parallel I/O. DCM enables the efficient placement of disk data because it raises disk cache hit-ratio by increasing the cache size when the utilization of the particular disk is high. Through experimental results, we show that DCM is quite efficient for a shared disk with higher utilization.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.33-43
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm "Rijndael". To achieve high throughput rate, a sub-pipeline stage is inserted into a round transformation block, resulting that two consecutive round functions are simultaneously operated. For area-efficient and low-power implementation, the round transformation block is designed to share the hardware resources for encryption and decryption. An efficient on-the-fly key scheduler is devised to supports the three master-key lengths of 128-b/192-b/256-b, and it generates round keys in the first sub-pipeline stage of each round processing. The Verilog-HDL model of the cryptoprocessor was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}m$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.760-768
• /
• 2009

In this paper, we propose the energy efficient transmission parameter selection method for Wireless Personal Area Network (WPAN) system which is applied to e-Navigation system considering various ship models environment. An appropriate selection of transmission parameters of HR-WPAN system is very essential to be considered for saving WPAN devices' energy consumption, when HR-WPAN system is applied to ship area network (SAN). Therefore, we propose an energy consumption model for a ship area network employing IEEE 802.15.3 based CSMA/CA HR-WPAN model and analyze the effect of transmission parameter selection on the performance of energy consumption. In particular, the path loss is the major performance decision parameter for the SAN employing HR-WPAN system, since it varies according to the material of shipbuilding such as steel(for large ship), FRP(for medium size ship) and compound wood(for small ship). Thus, we analyze and demonstrate that the proper transmission parameter selection of transmit power, PHY data rate and fragment size for each ship model could guarantee energy efficiency.