• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.435-437
• /
• 2001

The change of the electricity charge from cost base to price base due to the introduction of the electricity market competition causes consumer to choose a variety of charge schemes and a portion of loads to be affected by this change. Besides, it is required the index that consolidate the price volatility experienced on the power exchange with gaming and strategic bidding by suppliers to increase profits. Therefore, in order to find a mathematical model of the sensitively-responding-to-price loads, the price-sensitive load model is needed. And the development of state-of-the-art technologies affects the electricity price, so the diffusion of high-efficient end-uses and these price affect load patterns. This paper shows the analysis on learning curves algorithms which is used to investigate the correlation of the end-uses' price and load patterns.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1441-1446
• /
• 2008

Seoul Metro Line 9 (SML9) is the first subway line that private capital invests in Korea. SML9 will cross Seoul, linking the Gimpo Airport to the Gangnam district (25.5km) opening in the first half of 2009. SML9 has a new model in Korea constructed by metropolitan government and private company and operated by specialized public transportation service provider. SML9 is confronted with tough environment of stagnated public transportation and strong competitor, Olympic city expressway. And SML9 is under pressure for showing high efficiency as non-governmental organization from both customers and government. Consequently SML9 must lead the maximum efficiency by using its material and human resource. It is necessary that SML9 raise a competitive power and display its ability in active collaboration with relative organization and company. Hereupon, I propose renovation plans from viewpoint of operation field of SML9, (1) efficient train scheduling regime focusing on the combination of express and local train (2) close connection of other mean of transportation and (3) effective connection convention with Airport Railroad (AREX) as the line connected directly.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.849-857
• /
• 2018

This paper aims is to study the effect of photovoltaic generation penetration and STATCOM on the transient stability of a single machine infinite bus (SMIB) system based on the rotor angle stability. The influence of STATCOM and PV penetration can be seen through damping oscillations, so that the generator remains stable with the rest of the system for various fault conditions. The simulation results obtained make it possible to efficient identify harmful and beneficial impact of increasing the PV penetration and the existence of STATCOM capability. The system model is created in MATLAB/ SIMULINK software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.429-431
• /
• 2013

In this paper, we propose a low-power hibernation technique (LHT) for WUSB over IEEE 802.15.6 hierarchical MAC to improve its energy efficiency. Simulation results show that the LHT also integrate WUSB transactions and WBAN traffic efficiently while it achieves high energy efficiency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1015-1024
• /
• 1990

This paper proposes a program counter unit(PCU) on the pipelined architecture of RISC (Reduced Instruction Set Computer) type high performance processors, PCU is used for supplying instruction addresses to memory units(Instruction Cache) efficiently. A RISC processor's PCU has to compute the instruction address within required intervals continnously. So, using the method of self-generated incrementor, is more efficient than the conventional one's using ALU or private adder. The proposed PCU is designed to have the fast +4(Byte Address) operation incrementor that has no carry propagation delay. Design specifications are taken by analyzing the whole data path operation of target processor's default and exceptional mode instructions. CMOS and wired logic circuit technologic are used in PCU for the fast operation which has small layout area and power dissipation. The schematic capture and logic, timing simulation of proposed PCU are performed on Apollo W/S using Mentor Graphics CAD tooks.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.57-60
• /
• 2005

The existing DSP for utility interactive photovoltaic generation system control, generally uses floating point process type. Because it is easy to use for number crunching, However it is too late and too expensive. fixed point process DSP, TMS320F2812, has high control speed and is rather inexpensive. This paper presents more efficient method for MPPT control using TMS320F2812.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.384-385
• /
• 2013

본 논문에서 제안된 스위칭변조기법은 전기 자동차의 제한된 배터리 출력 전력으로 보다 향상된 주행거리 확보를 위해 기존 3상 SVPWM 제어기반 인버터의 스위칭 패턴을 분석한 후 이를 개선하기 위해 2개 스위칭시퀀스를 도입하여 조건에 따라 스위칭패턴을 선택하여 제어함으로써 스위칭손실을 저감시킬 수 있음을 시뮬레이션 및 실험해석을 통해 그 유효성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1150-1152
• /
• 1998

Recently, our electric industry confronts a structural change and high competiveness environment in the course of deregulation. Rapid growth in electricity demand, financial need for new power plant construction, and envionmental problems have led to search for more efficient energy production and energy conservation techmologies. Especially, residential and commercial buildings consumes 40% of electricity demands and building energies are increasing more and more in Korea. The purpose of this paper is to analyze the electricity use of commercial buildings by end-use. Also, we will use it as a basic informations of DSM potential evaluation and evaluation process based on different approach by sector and type of potential.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.215-220
• /
• 2018

A novel porous-core hexagonal lattice photonic crystal fiber (PCF) is designed and analyzed for efficient terahertz (THz) wave propagation. The finite element method based Comsol v4.2 software is used for numerical analysis of the proposed fiber. A perfectly matched layer boundary condition is used to characterize the guiding properties. Rectangular air-holes are used inside the core to introduce asymmetry for attaining high birefringence. By intentionally rotating the rectangular air holes of porous core structure, an ultrahigh birefringence of 0.045 and low effective material loss of $0.086cm^{-1}$ can be obtained at the operating frequency of 0.85 THz. Moreover, single-mode properties, power fraction in air core and confinement loss of the proposed PCF are also analyzed. This is expected to be useful for wideband imaging and telecom applications.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.3
• /
• pp.46-58
• /
• 1998

Multi-disk data allocation problem examined in this paper is to find a method to distribute a Binary Cartesian Product File on multiple disks to maximize parallel disk I/O accesses for partial match retrieval. This problem is known to be NP-hard, and heuristkc approaches have been applied to obtain sub-optimal solutions. Recently, efficient methods have been proposed with a restriction that the number of disks in which files are stored should be power of 2. In this paper, we propose a new disk Allocation method based on Genetic Algorithm(GA) to remove the restriction on the number of disks to be applied. Using the schema theory, we prove that our method can find a near-optimal solutionwith high probability. We compare the quality of solution derived by our method with General Disk Modulo, Binary Disk Modulo, and Error Correcting Code methods through the simulation. The simulation results show that proposed GA is superior to GDM method in all cases and provides comparable performance to the BDM method which has a restriction on the number of disks.