• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2004

This paper suggested the vibration characteristic improvement by variation mode of ring type ultrasonic motor. Design for the piezoelectric ceramic and elastic body of stator were calculated by the finite element method(FEM) that consider the resonance frequency, vibration mode and coupling efficiency etc. Through the result of vibration analysis from 6 order mode to 8 mode, the 7 order mode was gained very an excellent results that it was the coupling efficient, minimum power loss and bending vibration value. Here over 7 order mode, was acquired that an output current for input voltage was very a large increased results. The result of vibration calculation, from thickness 0.5[mm] to 2[mm], know the fact that the vibration displacement at 0.5[mm] is an high value too. From such analysis result, this paper was manufactured the ultrasonic motor of outer diameter 50[mm], inter 22[mm] having the about 43.86[KHz] resonance frequency. We have gated that a simulation result is 42.2[KHz] and an experiment result is 43.86[KHz]. Then, a propriety of this paper was established the result almost similar to though comparison, investigation of simulation and experiment result.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.21-25
• /
• 2013

The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.

• Journal of the Korean association of regional geographers
• /
• v.10 no.1
• /
• pp.23-33
• /
• 2004

The Roh Moo-hyun Government of Korea with highest fierily establishes policy framework and measures to accomplish the goal of regionally balanced development. With the vision "constructing a county in which every region provides high quality of life with its own specificity" and basic strategy "self-sustained localization", the policy framework is geared to economic aspects of development rather than cultual or social aspects. Subsequently, policy measures are also focused on such economic tools as regional innovation system, strategic industry, or industrial cluster. This paper suggests that future policy of balance development should set clear definition of balanced development, be based on a though evaluation of the Bast policy measures, and draw several fresh ideas which match characteristics of each region. These policy directions should be given higher power of practice with efficient organizational support.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.83-90
• /
• 2016

In this paper, we performed the analysis of transmission performance for Collision Free Period(CFP) supported by the low-power communication technology, IEEE 802.15.4 MAC (Media Access Control). For the analysis, periodic traffic, original service target of CFP, is considered and, according to the Quality of Service required, packet arrival pattern to MAC layer is categorized as batch and non-batch, and analysis on throughput, delay, and energy is performed for those patterns. On the basis of the obtained analysis, performance comparison with Collision Avoidance Period(CAP) is carried out for the health care applications that generate periodic traffic such as Pedometer, ECG, EMG. The evaluation confirms that CFP is more energy efficient for healthcare applications that generate periodic and time-critical traffic and moreover for the application with high bandwidth requirement CFP achieves up to 46% energy savings compared to CAP.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.24-27
• /
• 2016

In this study, a 1kW Solid Oxide Fuel Cell(SOFC) test system was developed. A SOFC is the most promising power system to provide the higher efficient(over 50%) for house application area(1~10kW). To develop the optimized test system, the temperature control module that controls the preprocess and reaction condition, the flow control module that controls of the mass of reactants, and the electric loader that tests the discharge performance condition, etc. The temperature control module was designed to provide the high control resolution(under $1^{\circ}C$ at $750^{\circ}C$ of operating temperature) using K-type thermal couple. The flow control module was designed control blower and heater precisely using the phase control method. And the electric loader is designed that provide CV, CC, CR discharge mode and minimized the operating error adopting the independent DC-DC converter on analog input and output module. The performance of the developed SOFC test system showed that the accuracy of stack voltage was 0.15% at 80V and stack current was 0.1% at 100A.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.14-20
• /
• 1995

Discourses on global environment are not only limited to the matter of simple environmen-tal protection but also going to an imperative that every country should take the environ-mental aspects into more consideration, and if necessary even proceed to modify its own strategies for economic growth. It is because scores of existing International conventions and agreements on environmental caused tend to combine the environmental issues with trade sanctions and financial assistances in order to ensure a mandatory power in pushing themselves through on a global dimension. Particularly noteworthy is the so -called Green Round(GR) which substantially associates the Issues of environmental protection with some sanctions in international trade, its rationale is quite simple. The differentiated production costs rising from the difference in environmental standards among different countries may affect national competitiveness in in-ternational trade, therefore a need does exist to countervail this difference. In reality, however, severe dissention seems to have been exposed between the developed and developing countries around this matter, because national interests and priorities in national goals considerably differ among respective countries. Greenhouse gases such as carbon dioxide which caused global warming are mostly released from the combustion of fossil fuels. The perfect removal of released $CO_{2}$ is impossible with existing technologies, and moreover, it's not payable in economical terms. Therefore it will be more effective and desirable to make more efforts to prevent the release of the $CO_{2}$ it- self through energy conservation involving the development and promotion of clean and high-efficient energy technologies and energy sources, and the development and promotion of new & renewable energy resources, and so on. One of important national tasks In our country is to establish an Energy Policy consider-ing environmental impacts since Korea depends most of its energy consumption on the fossil fuels such as oil and coal.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.458-465
• /
• 2007

Wireless Sensor Network(WSN) is a special network that collects measured data by sensor nodes in the predefined sensor field and forwards them to the base station in a distance using their own routing scheme. WSN requires routing techniques to maximize energy efficiency because sensor nodes have non-rechargeable and thus limited energy. Characteristics of WSN are various according to applications, many of routing algorithms have been proposed. This paper proposes an algorithm called A-PEGASIS that basically bases on PEGASIS and enhances in two aspects - an elegant chain generation algorithm and periodical update of chains. We compare performance of the previous algorithm of LEACH, PEGASIS, PEDAP and PEDAP-PA with ours through simulation. It confirms that the A-PEGASIS is most superior in terms of average WSN lifetime and high probability of node survival rate during WSN life time.

• Tunnel and Underground Space
• /
• v.24 no.3
• /
• pp.234-242
• /
• 2014

Deep drilling project should be managed systematically and efficiently because it is significantly influenced by various related factors having uncertainty and high risk in terms of economy and effective management. In particular, drilling project involves participants from various sectors including necessary service company and it also needs their collaboration by sharing related information occurring at drilling process in order to secure efficient performance management. We developed 4D (3D + time) information based visualization system for progress management by combining 3D design model and predicted optimized control parameters for each section in geothermal well design. We also applied PDM (precedence diagramming method) to the system in order to setup the effective process model and hooked it up to 3D information based on precedence relation and required time for informatized process network.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.693-715
• /
• 2014

Stochastic processes are used to represent phenomena in many diverse fields. Numerical simulation method is widely applied for the solution to stochastic problems of complex structures when alternative analytical methods are not applicable. In some practical applications the stochastic processes show non-Gaussian properties. When the stochastic processes deviate significantly from Gaussian, techniques for their accurate simulation must be available. The various existing simulation methods of non-Gaussian stochastic processes generally can only simulate super-Gaussian stochastic processes with the high-peak characteristics. And these methodologies are usually complicated and time consuming, not sufficiently intuitive. By revealing the inherent coupling effect of the phase and amplitude part of discrete Fourier representation of random time series on the non-Gaussian features (such as skewness and kurtosis) through theoretical analysis and simulation experiments, this paper presents a novel approach for the simulation of non-Gaussian stochastic processes with the prescribed amplitude probability density function (PDF) and power spectral density (PSD) by amplitude modulation and phase reconstruction. As compared to previous spectral representation method using phase modulation to obtain a non-Gaussian amplitude distribution, this non-Gaussian phase reconstruction strategy is more straightforward and efficient, capable of simulating both super-Gaussian and sub-Gaussian stochastic processes. Another attractive feature of the method is that the whole process can be implemented efficiently using the Fast Fourier Transform. Cases studies demonstrate the efficiency and accuracy of the proposed algorithm.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.1-12
• /
• 1999

A new algorithm of constructing binary decision diagram(BDD) for design verification of switch-level circuits is proposed in this paper. In the switch-level circuit, functions are characterized by serial and parallel connections of switches and the final logic values may have high-impedance and unstable states in addition to the logic values of 0 and 1. We extend the BDD to represent functions of switch-level circuits as acyclic graphs so called switch-level binary decision diagram (SLBDD). The function representation of the graph is in the worst case, exponential to the number of inputs. Thus, the ordering of decision variables plays a major role in graph sizes. Under the existence of pass-transistors and domino-logic of precharging circuitry, we also propose an input ordering algorithm for the efficiency in graph sizes. We conducted several experiments on various benchmark circuits and the results show that our algorithm is efficient enough to apply to functional simulation, power estimation, and fault-simulation of switch-level design.