• 대한족부족관절학회지
• /
• 제6권1호
• /
• pp.21-27
• /
• 2002

Pressure sores are an ulceration and necrosis of the skin and underlying tissue usually occur after prolonged or repeated pressure by interruption of blood flow from the small. vessels to the skin and deep tissue. The management of pressure sores is mostly difficult and requires prolonged hospitalization or repeated surgical interventions with a high recurrence rate. In this article we reviewed 14 cases of National Pressure Ulcer Advisory Pannel staging III, IV over the lateral malleolar area of the ankle in 2 years period from January 1999 to October 2001. The pressure over lateral malleolar area was mainly due to unique Korean sitting position with cross legs at flexed hips and knees or supine position of patient with external rotation of low extremity. Male to female ratio was 11: 3 and ages were between 36 and 83 (mean age: 67.1 years). Associated diseases were DM(7 cases), Hemiparesis caused by CVA(2 cases), Liver cirrhosis(2 cases), disarticulation of opposite hip due to squamous cell ca.(1 case), Intertrochanteric Fx.(1 case). Wound cultures reported Staphylococus, Pseudomonas and others. Abnormally elevated ESR and CRP were seen in 6 cases. Operative treatments were irrigation and debridement, direct closure with gravity drainage and skin grafting. The most important aspect of pressure sore treatment is pressure relief of the lateral malleolar area. Pressure-relieving Cast or Brace was helpful for local management and preventing recurrence.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.208-212
• /
• 2009

나노클레이는 높은 종횡비와 불연성, 나노 스케일의 크기로 인해 고분자 나노복합체의 첨가물로 널리 이용되고 있다. 최근엔 나노클레이를 폴리우레탄 폼에 적용함으로써, 열적 특성 및 기계적 특성이 향상되었다는 연구결과들이 있다. 본 연구에서는 폴리우레탄 폼의 물성에 대한 나노클레이의 농도와 초음파 분산의 효과에 대해 기술하였다. 제조된 나노클레이/폴리우레탄 폼의 특성은 복원시간, 압축변형, 셀의 모양 및 인장 실험 등을 통해 분석되었다. 그 결과, 초음파처리는 나노클레이의 분산에 매우 효과적이었고, 소량 첨가 시에는 폼 물성의 향상을 보였으나, 3 wt% 이상의 나노클레이 첨가는 오히려 물성의 저하를 초래함을 확인할 수 있었다. 특히, 초음파를 통해 분산시킨 20A 나노클레이 1 wt%가 첨가된 폴리우레탄 폼이 균일한 셀 사이즈와 뛰어난 치수안정성 등의 가장 최적화된 물성을 나타내었다. 본 연구결과는 건축용 단열재 등의 제조에 적용할 수 있을 것이다.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.221-228
• /
• 2003

해성점토를 이용한 준설매립공사에 있어서 준설매립 지반의 자중압밀현상을 예측하기 위해 준설점토의 간극비-유효응력-투수계수의 관계인 구성관계 산정은 가장 중요한 사항이다. 그러나 준설매립 지반은 고함수비의 재료특성으로 인해 실험을 통한 구성관계의 산정에 많은 어려움이 발생하게 된다. 이를 위해 저응력 압밀시험기 등을 이용한 실험을 통해 산정하고자 하는 연구들이 진행되고 있다. 본 연구에서는 저응력 압밀시험기를 이용하여 구성관계를 산정하였고, 저응력 압밀시험기를 이용한 실험시 많은 시간이 소요되는 단점을 극복하고자 준설점토를 이용한 컬럼실험에서 얻어진 변수들을 바탕으로 초연약 준설매립점토의 구성관계를 산정할 수 있는 산정식에 대한 연구를 실시하였다 저응력 압밀 및 투수실험을 통해 준설점토의 구성관계를 파악할 수 있었고, 또한 침강 및 자중압밀 실험결과를 이용하는 구성관계 산정식을 통해 저응력 단계에 대한 구성관계를 얻을 수 있었으며, 저응력 압밀시험에서 얻어진 결과와의 연속성을 확인할 수 있었다. 따라서 본 연구의 산정식을 이용하여 간편하게 구성관계를 파악할 수 있었다. 본 연구의 구성관계 산정식을 이용하여 준설매립지반의 자중압밀현상을 예측에 이용할 수 있으리라고 판단된다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.389-394
• /
• 2017

본 연구는 콘크리트 블록을 생산하는 공장에서 경제적이면서 환경 친화적인 블록을 생산하기 위해 산업부산물 자원을 효과적으로 이용하는 방안에 관한 것이다. 즉, BS 3종에 일라이트, 탈황석고 및 폐내화물울 치환하여 종전에 연구되었던 결과에서 양호한 것으로 밝혀진 몇 개 변수를 Mock-up 시험성격으로 실제 생산라인에서 호안블록을 생산하여 그 특성을 분석하므로써 최적 조합을 확정하고자 한다. 실험결과 압축강도, 흡수율, 내동해성 및 수질영향의 pH 관점에서 고려하면 BS 3종에 정제 탈황석고 5% 치환 및 여기에 골재로서 일라이트를 1% 치환한 배합이 최적인 것으로 분석되었다. 그러나 일라이트는 시멘트 보다 고가이므로 경제적인 측면까지도 고려하면 BS 3종에 5%의 정제 탈황석고를 결합재로 치환하는 배합이 최적 조합인 것으로 밝혀졌다.

• Journal of Electrochemical Science and Technology
• /
• 제3권2호
• /
• pp.57-62
• /
• 2012

In this report, we demonstrate that the longitudinal localized surface plasmon resonance mode can be suppressed when the nanorods were in dumbbell shape. The seed nanorods were synthesized by electrochemical deposition of metals into the pores of anodic aluminum oxide templates. The dumbbell-like nanorods were grown from seed Au-Ni-Au nanorods by a rate-controlled seed-mediated growth strategy. The selective deposition of Au atoms onto Au blocks of Au-Ni-Au nanorods produced larger diameter of Au nanorods with bumpy surface resulting in dumbbell-like nanorods. The morphology of nanorods depended on the reduction rate of $AuCl_4^-$, slow rate producing smooth surface of Au nanorods, but high reduction rate producing bumpy surface morphology. Through systematic investigation into the UV-Vis-NIR spectroscopy, we found that the multiple localized surface plasmon resonance (LSPR) modes were available from single-component Au nanorods. And, their LSPR modes of Au NRs with bumpy surface, compared to the smooth seed Au NRs, were red-shifted, which was obviously attributed to the increased electron oscillation pathways. While the longitudinal LSPR modes of smoothly grown Au NRs were blue-shifted except for a dipole transverse LSPR mode, which can be interpreted by decreased aspect ratio. In addition, dumbbell-like nanorods showed an almost disappeared longitudinal LSPR mode. It reflects that the plasmonic properties can be engineered using complex nanorods structure.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.187-195
• /
• 2009

Much attention has been paid to the processing of inorganic whisker, especially calcium carbonate whisker, which can be used as reinforcement materials of polymer composite due to its low price. Unfortunately, the present synthesis technique of calcium carbonate whisker starts from calcinations of limestone, which involves high energy consumption and furthermore is a highly environment polluting reaction. In this report, needle-like aragonite was synthesized with a reversible solution reaction from limestone without calcination. Optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the morphology and crystal structure of intermediates as well as that of the product, aragonite. GCC (grinding calcium carbonate) powder was dissolved in an aqueous solution of magnesium sulfate with reflux and air flush. EDTA titration was used to evaluate reaction rate of the dissolution. A kinetics equation of the dissolution reaction was constructed, which displayed second-order kinetics with respect to the concentration of magnesium sulfate. A rate constant of $0.0015\;l^{-3}{\cdot}mol^{-1}{\cdot}h^{-1}$ was obtained. The dissolution reaction gave fiber-like magnesium hydroxide sulfate and gypsum crystal. Then needle-like aragonite with a length of $9.13\;{\pm}\;1.02\;{\mu}m$ and an aspect ratio of $5.64\;{\pm}\;1.37$ was synthesized from the dissolution product with $CO_2$ bubbling at $70^{\circ}C$.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.59-65
• /
• 2016

Korea Aerospace Research Institute (KARI) is developing an electric-driven HALE UAV in order to secure system and operational technologies since 2010. Based on the 5 years of flight tests and design experiences of the previously developed electric-driven UAVs, KARI has designed EAV-3, a solar-powered HALE UAV. EAV-3 weighs 53 kg, the structure weight is 21 kg, and features a flexible wing of 19.5 m in span with the aspect ratio of 17.4. Designing the main wing and empennage of the EAV-3 the amount of the bending due to the flexible wing, 404 mm at 1-G flight condition based on T-800 composite material, and side wind effects due to low cruise speed, V_cr = 6 m/sec, are carefully considered. Also, unlike the general aircraft there is no center of gravity shift during the flight. Thus, the static margin cuts down to 28.4% and center of gravity moves back to 31% of the Mean Aerodynamic Chord (MAC) comparing to the previously developed scale-down HALE UAVs, EAV-2 and EAV-2H, to minimize a trim drag and enhance a performance of the EAV-3. The first flight of the EAV-3 has successfully conducted on the July 29, 2015 and the test flight above the altitude 14 km has efficiently achieved on the August 5, 2015 at the Goheung aviation center.

• 한국환경농학회지
• /
• 제28권1호
• /
• pp.53-58
• /
• 2009

The propose of this study was to find out optimum conditions for no-tillage rice-winter cover crops cropping system. A field research was conducted to evaluate productivity and quality of rice cultivars (Dongjinbyeo and Junambybyeo) in rice-winter cover cropping systems at Doo-ryangmyeon., Sacheon, Gyeongsangnam-do, Korea from January 2005 to October 2006. The experimental soil was Juggog series (fine silty, mesic family of Fluvaquentic Eutrndepts). The rice cultivars were experimented under some different high residue farming systems, i.e. no-tillage no treatment (NTNT), no-tillage amended with rice straw (NTRS), no-tillage amended with rye (NTR), no-tillage amended with Chinese milkvetch (NTCMV), tillage no treatment (TNT), and conventional cropping system (Control). The miss-planted rate was 8.8% in 2005 and range of 10.8% to 13.3% in 2006 at NTR, and the other treatments were carried out at miss-planted rate ranging from 1.2% to 5.0%. Tiller numbers of Junambyeo, and Dongjinbyeo in both of years were the highest in Control, and decreased nearly in NTCMV, NTR, NTRS, NTNT, and TNT in that order. The lowest grain yield was observed in TNT both cultivars due to the lower tiller numbers per area, and spikelet numbers per panicle. Also, no-tillage treatments were lower grain yield than control. On the other hand, 1,000-grain weight was lowest in control due to higher tiller numbers per area, and spikelet numbers per panicle. Ripened grain ratio was a similar aspect in all treatments. The palatability score of milled rice was lowest in control while protein content of milled rice was highest in control. The NTCMV was considered an effective sustainable farming practice for rice yield and quality.

• Smart Structures and Systems
• /
• 제26권5호
• /
• pp.619-629
• /
• 2020

Solar towers, which often has a large aspect ratio and low fundamental natural frequency, were extremely prone to large amplitude of wind-induced vibrations, especially Vortex-Induced Vibration (VIV). A tiny Tuned Mass Damper (TMD) with conveniently adjustable eddy current damping was specially designed and manufactured for elastic wind tunnel tests of a solar tower. A series of numerical simulations by using the COMSOL software were conducted to determine three key parameters, including the thickness of the back iron plate and the conductive plate (T_b and T_c), the distance between the magnet and the conductive plate (T_d). Based on the results of numerical simulations, a tiny TMD was manufactured and its structural parameters were experimentally identified. The optimized values of the tiny TMD can be conveniently realized. The tiny TMD was installed at the top of the elastic test model of a 243-meter-high solar tower, and a series of wind tunnel tests were carried out to examine the effectiveness of the TMD in suppressing wind-induced responses of the test model. The results showed that the wind-induced responses could be obviously reduced by the TMD, especially in the cross-wind direction. The cross-wind RMS and peak responses at the critical wind velocity can be reduced by about 86% and 75%, respectively. However, the maximum reduction of the responses at the design wind velocity is about 45%, obviously less than that at the critical wind velocity.