• 한국항공우주학회지
• /
• 제40권11호
• /
• pp.1004-1009
• /
• 2012

탄소나노튜브는 우수한 전기적 특성과 전계를 집중시킬 수 있는 높은 종횡비 그리고 뛰어난 열적 안정성 때문에, 높은 전류밀도와 낮은 구동전압 그리고 긴 수명시간과 같은 우수한 전계 방출 특성을 구현할 수 있는 재료이다. 탄소나노튜브를 이용하여 전계방출원을 제작하기 위해서는 금속전극에 탄소나노튜브를 고정시켜야 한다. 이때 금속과 탄소나노튜브 사이의 접촉문제가 필수적인데, 본 실험에서는 그래핀을 계면으로 사용함으로써 본 문제를 해결하였다. 이러한 시도는 금속과 탄소나노튜브 사이에 우수한 전기적 열적 계면을 형성함으로써 기존 전계방출원보다 뛰어난 전계방출 성능을 얻을 수 있게 하였다. 본 연구를 통해 탄소나노튜브 전계방출원을 전자 추진원으로의 응용이 기대된다.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.47-58
• /
• 2014

본 연구에서는 대체에너지로 태양광과 수소재생연료전지를 사용하는 고고도 장기체공 무인기의 초기 사이징을 수행하였다. 박스 윙 형태의 형상 대신 해외에서 연구가 많이 진행되어 상대적으로 기본 자료들이 풍부한 글라이더 형태의 형상을 선택하였다. 이륙중량 150 kg 급으로 추진 시스템은 모터와 프로펠러, 태양광 전지, 전기분해를 통해 재충전이 가능한 액체수소 연료전지로 구성되어있다. 하루 동안 순항 비행 시 필요한 최소 요구 에너지와 낮 시간으로부터 얻을 수 있는 태양광 에너지와의 에너지 균형을 고려하여 가로세로비, 날개 길이, 면적 등 항공기 설계변수를 변화시키면서 전체 이륙중량을 추정하였다.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• 콘크리트학회논문집
• /
• 제25권6호
• /
• pp.649-656
• /
• 2013

병렬전단벽시스템은 경제적이고 효율적인 구조시스템이지만, 연결보의 복잡한 철근상세가 요구된다. 이를 보완하고자 ACI-318에서는 개선된 철근상세를 제안하고 있지만 과도한 횡보강근으로 현장 적용에 어려움이 따른다. 이 연구에서는 횡보강 철근량을 감소시킨 대각철근을 갖는 HPFRCC 연결보 상세를 제안하고, 형상비 2.0 실험체를 통해 현행 기준에 만족하는 대각철근을 갖는 철근콘크리트 연결보와 이력거동을 비교 평가하였다. 그 결과, HPFRCC의 횡구속 효과를 확인하였고, 횡구속 철근을 기준의 1/2로 배근하고 HPFRCC로 보강한 연결보는 현행기준에 따른 연결보와 유사한 내진성능을 보였다. HPFRCC 보강을 통해 대각보강된 철근콘크리트 연결보의 횡구속 철근량을 감소시킴으로써 철근상세의 단순화가 가능할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.585-586
• /
• 2006

In this paper, we present a design, analysis, fabrication and performance test of the novel DoD metal-jet system for application to the high-density and high-temperature-melting materials. Based on the theoretical analysis, we design the metal-jet print head system and fabricate the metal-jet system, which can eject the droplet of lead-free metal solder in the high-temperature. In the experimental test, we set up the test apparatus for visualization of the droplet ejection and measure the Ejected droplet volume and velocity. As a result, the diameter, volume and the velocity of the ejected droplet are about $65-70{\mu}m$, 145-180 pl and 4m/sec. We also fabricate vertical and inclined 3D micro column structures using the present molten metal inkjet system. The measured geometries of the micro column structures are about height of $2,100{\mu}m$, diameter of $200{\mu}m$ and aspect ratio of 10.5 for vertical micro column and $1,400{\mu}m$ of height and $150{\mu}m$ of diameter for $65^{\circ}$-inclined micro column, respectively.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.8-12
• /
• 2011

As the aged population grows around the world, many medical instruments and devices have been developed recently. Among the devices, a drug delivery stent is a medical device which requires precision machining. Conventional drug delivery stent has problems of residual polymer and decoating because the drug is coated on the surface of stent with the polymer. If the drug is impregnated in micro hole array on the surface of the stent, the problem can be solved. Micro sized holes are generally fabricated by laser machining; however, the fabricated holes do not have an enough aspect ratio to contain the drug or a good surface finish to deliver it to blood vessel tissue. To overcome these problems, we propose a vibration-assisted machining mechanism with PZT (Piezoelectric Transducers) for the fabrication of micro sized holes. If the mechanism vibrates the eyepiece of the laser machining head, the laser spot on the workpiece will vibrate vertically because objective lens in the eyepiece shakes by the mechanism's vibration. According to the former researches, the vibrating frequency over 20kHz and amplitude over 500nm are preferable. The vibration mechanism has cylindrical guide, hollowed PZT and supports. In the cylinder, the eyepiece is mounted. The cylindrical guide has upper and low plates and side wall. The shape of plates and side wall are designed to have high resonating frequency and large amplitude of motion. The PZT also is selected to have high actuating force and high speed of motion. The support has symmetrical and rigid characteristics.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.80-86
• /
• 2010

탄소나노튜브는 우수한 기계적 특성, 전기적 및 자기적 성질 뿐만 아니라 나노 크기의 직경 및 높은 종횡비를 나타낸다. 이는 고강도 고분자 복합체의 이상적인 보강제로 사용할 수 있다. 기능성이 부과된 탄소나노튜브는 기능성 재료 및 복합재료의 제조와 같은 분야에서 아주 유력한 재료로 믿어진다. 탄소나노튜브-고분자 복합체는 탄소나노튜브의 우수한 기능성과 고분자의 우수한 가공성을 가질 것으로 기대된다. 그러나, 탄소나노튜브는 보통 반 델 바알스 작용에 의한 안정화된 번들을 형성하기 때문에 고분자 기지에 배열이나 분산이 상당히 어렵다. 탄소나노튜브 강화복합체의 제조에서 가장 큰 이슈는 고분자내에 탄소나노튜브의 효과적인 분산이며, 기지내에 탄소나노튜브의 배열과 양의 조절이다. 고분자 기지내에 탄소나노튜브의 분산은 용액혼합, 벌크 혼합, 용융혼합, 즉시 고분자화 반응 및 탄소나노튜브의 화학적 기능화 등과 같은 몇 가지 방법이 있다. 본 논평에서는 이들 방법과 고성능 탄소나노튜브-고분자 복합체의 제조에 대하여 서술하고자 한다.

• Composites Research
• /
• 제12권2호
• /
• pp.91-100
• /
• 1999

고상공정법(SSP)에 의한 고강도폴리에틸렌(HSPE) 섬유의 제조는 초고분자량 폴리에틸렌 분말의 압출과 연신으로 용매를 사용하지 않고 제조된다. 고상공정으로 제조된 고강도 PE 테이프사의 특성을 분석한 결과, 고강도 PE 테이프사는 여신비의 증가에 따라 인장강도가 증가하였고, 파단면에서 fibril 분리현상이 많이 생겼다. 고강도 PE 테이프사의 표면을 산소플리즈마로 처리하여, 표면에너지를 측정하였고, 수지와 계면결합력을 분석한 결과, 100W와 5분간의 플라즈마 처리에서 가장 높은 계면결합력을 나타내었다. 고강도 PE 테이프사 강화복합재료의 물성을 겔방사법으로 제조된 고강도 PE 섬유강화 복합재료의 물성과 비교하여 고찰하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.75.2-75.2
• /
• 2013

Atomic layer deposition (ALD), utilizing self-limiting surface reactions, could offer promising perspectives for future efficient energy conversion devices. The capabilities of ALD for surface/interface modification and construction of novel architectures with sub-nanometer precision and exceptional conformality over high aspect ratio make it more valuable than any other deposition methods in nanoscale science and technology. In the context, a variety of researches on fabrication of active materials for energy conversion applications by ALD are emerging. Among those materials, one-dimensional nanotubular titanium dioxide, providing not only high specific surface area but also efficient carrier transport pathway, is a class of the most intensively explored materials for energy conversion systems, such as photovoltaic cells and photo/electrochemical devices. The monodisperse, stoichiometric, anatase, TiO2 nanotubes with smooth surface morphology and controlled wall thickness were fabricated via low-temperature template-directed ALD followed by subsequent annealing. The ALD-grown, anatase, TiO2 nanotubes in alumina template show unusual crystal growth behavior which allows to form remarkably large grains along axial direction over certain wall thickness. We also fabricated dye-sensitized solar cells (DSCs) introducing our anatase TiO2 nanotubes as photoanodes, and studied the effect of blocking layer, TiO2 thin films formed by ALD, on overall device efficiency. The photon convertsion efficiency ~7% were measured for our TiO2 nanotubebased DSCs with blocking layers, which is ~1% higher than ones without blocking layer. We also performed open circuit voltage decay measurement to estimate recombination rate in our cells, which is 3 times longer than conventional nanoparticulate photoanodes. The high efficiency of our ALD-grown, anatase, TiO2 nanotube-based DSCs may be attributed to both enhanced charge transport property of our TiO2 nanotubes photoanode and the suppression of recombination at the interface between transparent conducting electrode and iodine electrolytes by blocking layer.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.74-79
• /
• 2009

Titanium and titanium alloy can be reproduced immediately even if oxide films($TiO_2$) break apart in sea water. Therefore, since titanium demonstrates large specific strength and outstanding resistance to stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion in sea water environment, it has been widely applied to heat exchanger for ships. In particular, with excellent elongation, pure titanium may be deemed as optimal material for production of heat exchanger plate which is used with wrinkles formed for efficient heat exchange. Conventional plate type heat exchanger prevented leakage of liquid through insertion of gasket between plates and mechanical tightening by bolts and nuts, but in high temperature and high pressure environment, gasket deterioration and leakage occur, so heat exchanger for LPG re-liquefaction device etc do not use gasket but weld heat exchanger plate for use. On the other hand, since welded plate cannot be separated, it is important to obtain high quality reliable welds. In addition, for better workability and production performance, lasers that can obtain weldment with large aspect ratio and demonstrate fast welding speed even in atmospheric condition not in vacuum condition are used in producing products. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through quantitative analysis of oxygen and nitrogen and measurement of hardness as fundamental experiment for the evaluation of titanium laser welding, and evaluated the welding performance and mechanical properties of butt welding. This study welded specimens in various conditions by using laser and GTA welding machine to apply edge welding to heat exchanger, and evaluated the mechanical strength through tensile stress test. As a result of tensile test, laser weldment demonstrated tensile strength 4 times higher than GTA welds, and porosity could be controlled by increasing and decreasing slope of laser power at overlap area.