• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.143-149
• /
• 2008

A numerical study was performed for a vane of a compressor with a high-turning angle and meridional divergence. At first, the effect of the suction position was discussed. Then, the optimal suction position was applied to the cascades with the aspect ratio of 2.53 and 0.3, respectively, to get the knowledge of the effect of the endwall boundary layer removal on the secondary flow along the blade height. At last, using the critical principles of the three-dimensional separation, the topological structures of the flow patterns of the body surfaces and the separation configurations were discussed in detail. The results show that the largest reduction of the total loss can be achieved when the suction slot is near the suction side. The topological structure as well as the separation configuration varies due to boundary layer removal, which restrains the flow separation at the corner and delays or depresses the separation on the suction surface. Compared with the original cascade, the cascade with the endwall boundary layer removal has a higher blade loading along the most span. Furthermore the flow loss decreases and distributes uniformly along the span.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.121-132
• /
• 1994

The aim of the present paper is to clarify the damage characteristics fur ship bottom stiffened platings in grounding. For this purpose, a series of tests are performed. A rigid wedge is quasi-statically pushed into the high tensile steel plates with two stiffeners. The aspect ratio of plates(a/B) is in the range from 1.0 to 2.5 and the thickness of plates is in the range from 3.4 to 7.0mm. Also other parameters, namely the shape of wedge tip, wedge angle and property/direction of stiffeners are varied. The test is carried out using the 100ton universal test machine. During the loading. both applied force and length of cutting(penetration) resulting in the grounding force-penetration response are measured.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.507-515
• /
• 1994

Fly ash and betonite samples were selected and characteristics of them were investigated. Fly ash was found to be similar to bentonite in particle size distribution but quite different in microstructure. The most special aspect of fly ash was high alkalinity of its solution. Distribution coefficients of Cs and Co on the samples were measured to survey the effects of mixing. Fly ash showed higher distribution coefficient of Co than that of Cs. Through various experiments, factors affecting the distribution coefficients of Co and Cs on mixture of bentonite and fly ash were identified. Comparison of the distribution coefficients of Cs on fly ash and bentonite mixture with those on sand and bentonite mixture suggests that fly ash would be useful as an efficient additive of backfill material if pertinent mixing ratio was chosen.

• Food preservation and processing industry
• /
• v.6 no.2
• /
• pp.11-13
• /
• 2007

This study relates to low and medium molecular weight isoflavone-${\beta}$-D-glucan produced by submerged liquid culture of Agaricus blazei, a method of producing the isoflavone-B-D-glucan using autolysis enzyme of Agaricus blazei mycelia, and use of the isoflavone-B-D-glucan for anti-cancer and immunoenhancing effect. In acordance with one aspect of the present study, it deals with a method of producing isoflavone-${\beta}$-D-glucan, which comprises the followings; 1) culturing and separating mushroom mycelia, 2) producing low-medium molecular weight isoflavone-${\beta}$-D-glucan from high molecular weight one. The cytotoxicity on human cnacer cell line (Caco-2, MCF-7), the expression of Cyclin D, Bcl-2, Bax protein, p21 protein, p53 protein in MCF-7 cells assessed by SDS-PAGE and immunoblotting, and other immuno related factor such as TNF-a and IL-1B activities were examined. Structural identification of isoflavone-${\beta}$-D-glucan which shoed cytotoxicity against cancer cell and immunoenhancing effects was carried by separation with DEAE-cellulose column chromatography, TLC, HPLC, IR, NMR, Clinical test for the cancer patients (n=119) for 6 month was carried out, and immunoenhancing factors(NK cell number, ratio of T4/T8) were checked. We concluded the identified isoflavone-${\beta}$-D-glucan has immuno enhancing effects and could be useful for cancer chemoprevention.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.44-47
• /
• 2019

Amorphous carbon layer (ACL) is actively used as an etch mask. Recent advances in patterning ACL requires the next level of durability of hard mask in high aspect ratio etch in near future semiconductor manufacturing, and it is worthwhile to know the surface property of ACL thin film to enhance the property of etch hard mask. In this research, ACL are deposited by 6 inch plasma enhanced chemical vapor deposition system with $C_3H_6$ and $N_2$ gas mixture. Surface properties of deposited ACL are investigated depending on gas flow, pressure, RF power. Fourier transform infrared is used for the analysis of surface chemistry, and X-ray photoemission spectra is used for the structural analysis with the consideration of the contents of $sp^2$ and $sp^3$ through fitting of C1s. Also mechanical properties of deposited ACL are measured in order to evaluate hardness.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.559-567
• /
• 2018

Technological innovations in sustainable materials for soil improvement have attracted considerable interest due to energy crisis and environmental concerns in recent years. This study presents results of a comprehensive investigation on utilization of nanocarbons in reinforcement of a residual soil mixed with 0, 10 and 20% bentonite. Effects of adding proportionate quantities (0, 0.05, 0.075, 0.1 and 0.2%) of carbon nanotubes and carbon nanofibers to soil samples of different plasticities were evaluated. The investigation revealed that the inclusion of nanocarbons into the soil samples significantly improved unconfined compressive strength, Young's modulus and indirect tensile strength. It was observed that carbon nanofibers showed better performance as compared to carbon nanotubes. The nanosized diameter and high aspect ratio of nanocarbons make it possible to distribute the reinforcing materials on a much smaller scale and bridge the inter-particles voids. As a result, a better 'soil-reinforcing material' interaction is achieved and desired properties of the soil are improved at nanolevel.

• Structural Engineering and Mechanics
• /
• v.69 no.4
• /
• pp.383-397
• /
• 2019

More than one longitudinal web stiffener may be economical in the design of plate girders that have considerably high width-to-thickness ratio of webs. In this study, the bend-buckling strength of relatively deep webs with two horizontal lines of flat plate-shaped single-sided stiffeners was numerically investigated. Linear eigenvalue buckling analyses were conducted for specially selected hypothetical models of stiffened web panels, in which top and bottom junctions of a web with flanges were assumed to have simply supported boundary conditions. Major parameters in the analyses were the locations of two longitudinal stiffeners, stress ratios in the web, slenderness ratios and aspect ratios of web panels. Based on the application of assumptions on the combined locations of the two longitudinal web stiffeners, simplified equations were proposed for the bend-buckling coefficients and compared to the case of one longitudinal stiffener. It was found that bend-buckling coefficients can be doubled by adopting two longitudinal stiffeners instead of one longitudinal stiffener. For practical design purposes, additional equations were proposed for the required bending rigidity of the longitudinal stiffeners arranged in two horizontal lines on a web.

• Wind and Structures
• /
• v.29 no.3
• /
• pp.209-223
• /
• 2019

The assessment of wind-induced vibration for tall reinforced concrete (RC) buildings requires the accurate estimation of their dynamic properties, e.g., the fundamental vibration periods and damping ratios. In this study, RC frame-shear wall systems designed under gravity and wind loadings have been evaluated by utilising 3D FE modelling incorporating eigen-analysis to obtain the elastic periods of vibration. The conducted parameters consist of the number of storeys, the plan aspect ratio (AR) of buildings, the core dimensions, the space efficiency (SE), and the leasing depth (LD) between the internal central core and outer frames. This analysis provides a reliable basis for further investigating the effects of these parameters and establishing new formulas for predicting the fundamental vibration periods by using regression analyses on the obtained results. The proposed constrained numerically based formula for vibration periods of tall RC frame-shear wall office buildings in terms of the height of buildings reasonably agrees with some cited formulas for vibration period from design codes and standards. However, the same proposed formula has a high discrepancy with other cited formulas from the rest of design codes and standards. Also, the proposed formula agrees well with some cited experimentally based formulas.

• The Korean Journal of Pain
• /
• v.32 no.4
• /
• pp.280-285
• /
• 2019

Background: Pulsed radiofrequency (PRF) is a treatment modality that alleviates radicular pain by intermittently applying high-frequency currents adjacent to the dorsal root ganglion. There has been no comparative study on analgesic effect according to the position of the needle tip in PRF treatment. The objective of this study is to evaluate the clinical outcomes of PRF according to the needle tip position. Methods: Patients were classified into 2 groups (group IP [group inside of pedicle] and group OP [group outside of pedicle]) based on needle tip position in the anteroposterior view of fluoroscopy. In the anteroposterior view, the needle tip was advanced medially further than the lateral aspect of the corresponding pedicle in group IP; however, in group OP, the needle tip was not advanced. The treatment outcomes and pain scores were evaluated at 4, 8, and 12 weeks after applying PRF. Results: At 4, 8, and 12 weeks, there were no significant differences between the successful response rate and numerical rating scale score ratio. Conclusions: The analgesic efficacy of PRF treatment did not differ with the needle tip position.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.32-37
• /
• 2019

In various types of large-scale electrical applications, the number of coil turns in such machines is usually large. Electromagnetic simulation of large-scale superconducting coils (tens to hundreds of turns) is indispensable in the design process of superconducting electrical equipment. However, due to the large scale of the coil and the large aspect ratio of super-conducting material layer in HTS coated conductor, it is usually difficult or even unable to perform 3-D transient electromagnetic simulation. This paper introduces an effective 3-D electromagnetic simulation method for large-scale HTS coated conductor coil based on T-A formulation. The simulation and experimental results show that the 3-D model based on the T-A formulation using homogeneous strategy is more accurate than the traditional 2-D models. The memory usage is not sensitive to the number of turns and this model will be even more superior as the number of turns becomes larger.