• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.138-145
• /
• 2017

The purpose of this study is to establish a reasonable analytical method for the estimation of overall behavior characteristic from cracking to yielding of rebar and crushing of concrete and seismic performance of reinforced concrete shear wall with high-strength reinforcing bar. A total of 8 specimens of reinforced concrete walls which have constant aspect ratio and a variety of variables such as reinforcement ratio, reinforcement yielding strength, reinforcement details, concrete design strength, section shape and whether lateral restraint hoop were selected and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the proposed constitutive equation by the authors. The mean and coefficient of variation for maximum load from the experiment and analysis results was predicted 1.04 and 8%. The mean and coefficient of variation for displacement corresponding maximum load from the experiment and analysis results was predicted 1.17 and 19% respectively. The analytical results were predicted relatively well the fracture mode and the overall behavior until fracture for all specimens. These results are expected to be used as basic data for application of high-strength reinforcing bar to design codes in the future.

• The Journal of Internal Korean Medicine
• /
• v.28 no.4
• /
• pp.741-750
• /
• 2007

Objective : This study investigated the relationship between diet and lifestyle and Sasang constitution (SC) in acute stroke patients. Methods : From October 2005 to March 2007, 379 acute stroke patients were included. Patients were hospitalized within 14 days after the onset of stroke at DongGuk University International Hospital, Kyungwon University In-cheon Oriental Medical Hospital or Department Cardiovascular and Neurologic Diseases (stroke center), Kyung Hee University Oriental hospital. We assessed the type of SC of acute stroke patients by Questionnaire for Sasang Constitution Classification II (QSCC II). We investigated general characteristics, stroke types, dietary preferences (meat, sea food, fast food, alcohol drinking, coffee and green tea drinking) and lifestyle (smoking, exercise) according to SC. Results : This study showed that out of the total patients, the proportion of So-yang to Tae-eum to So-eumwas equal to 2.6 to 2 to 1. Of note, this study showed a higher proportion in age of So-eum & weight of Tae-eum. The ratio of cerebral hemorrhage to cerebral infarction was 1 to 9. SVO, LAA, SUE are the 3 types of cerebral infarction classified by TOAST; SVO ranked the highest while SUE ranked the lowest in all constitutions. There were no significant differences between So-yang and Tae-eum in the aspect of the preference for meat, but the majority of So-eum displayed high preferences for seafood. In the aspect of alcohol drinking and smoking history, So-yang recorded significantly bigger proportion while So-eum & Tae-eum patients represented a bigger proportion than So-yangin the aspect of no exercise habits. Conclusion : According to the result above, we could observe the general disposition of various characteristic distributions according to SC of acute stroke patients. Also, we could observe a relationship between diet and lifestyle and Sasang constitution (SC) in acute stroke patients. Further studies will be needed to better understand the relationship between diet and lifestyle and Sasang constitution (SC) in acute stroke patients.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.93-96
• /
• 2000

Microchannel plates (MCPs) have been developed by introducing new materials and process technologies. Main body was made of alumina by programmable punching, laminating, and firing. The channel walls of pore arrays of an MCP were deposited with thin films by electroless copper plating and sol-gel process. Our MCP has advantages such as easy fabrication, durability, high temperature endurance, and applicability to the large size comparing with the conventional MCPs. Experiments on the brightness of an MCP incorporated FED revealed that the FED with a MCP is three to four times brighter than a conventional FED. Moreover, the focusing in a FED is improved. Incorporating an MCP into a FED is one of promising methods to enhance the characteristics of the FED. In addition, amplification yield of the MCP is measured for varying the aspect ratio and the input current.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.424-430
• /
• 2009

Electromagnetic wave energies are consumed in the form of thermal energy, which is mainly caused by magnetic loss, dielectric loss and conductive loss. In this study, CNT was added to the nanocrystalline soft magnetic materials inducing a high magnetic loss, in order to improve the dielectric loss of the EM wave absorption sheet. Generally, the aspect ratio and the dispersion state of CNT can be changed by the pre-ball milling process, which affects the absorbing properties. After the various ball-milling processes, 1wt% of CNTs were mixed with the nanocrystalline $Fe_{73}Si_{16}B_7Nb_{3}Cu_1$ base powder, and then further processed to make EM absorption sheets. As a result, the addition of CNT to Fe-based nanocrystalline materials improved the absorption properties. However, the increase of ball-milling time for more than 1h was not desirable for the powder mixture, because the ballmilling caused the shortening of CNT length and the agglomeration of the CNT flakes.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.581-587
• /
• 2003

This study was designed to examine the effect of icroencapsulated iron fortified drink yogurt and vitamin C as a bioavailable helper of iron on chemical and sensory aspects during 20 d storage. Coating material was polyglycerol monostearate (PGMS), and ferric ammonium sulfate and vit C were selected as core materials. The highest efficiency of microencapsulation of iron and vit C were 73% and 95%, respectively, with 5:1:50 ratio (w/w/v) as coating to core material to distilled water. Iron fortification did not affect the fermentation time required for the drink yogurt to reach pH 4.2. The addition of uncapsulated iron decreased the pH during storage. TBA absorbance was significantly lower in capsulated treatments than in uncapsulated treatments during storage. In sensory aspect, the yogurt sample added with uncapsulated iron and vit C, regardless of capsulation, showed a significantly high score of astringency, compared with those of control and other groups. A significantly strong sourness was observed in treatment containing capsulated iron and uncapsulated vitamin C at every time interval. The present study provides evidence that microencapsulation of iron with PGMS is effective for iron fortification in drink yogurt.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.118.2-118.2
• /
• 2016

3D NAND 제조에 있어 high-aspect-ratio etch 공정을 견뎌낼 수 있는 hardmask 소재로서 amorphous carbon layer (ACL) 가 각광받고 있으며 hardmask로서의 특성을 향상시키기 위해 다양한 연구가 진행중에 있다 [1]. 본 연구팀의 기존 연구에서 질소 및 붕소 doping 된 ACL 박막의 etch rate 및 Raman 분석을 통해 박막 특성을 확인한 바 있었으나, 공정 중 arcing이 일어나는 등 의도치 않은 문제로 인해 공정 최적화에 일부 문제가 존재하였다. 본 연구에서는 plasma enhanced chemical vapor deposition (PECVD) 공정을 통해 C6H12 기체 및 doping을 위한 NH3 와 B2H6 두 기체를 이용하여 특성 개선된 ACL을 증착하는 과정에서 발생하는 arcing 및 증착 특성을 규명하고자 진공 내 입자의 수농도를 실시간 측정할 수 있는 particle beam mass spectrometer(PBMS)를 적용, 특정 공정 사건 진단 및 해당 사건에서 발생하는 입자를 분석, 증착된 박막의 Raman spectroscopy 결과와 비교 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.130-130
• /
• 2016

Bioinspired hierarchical nanostructures for self-cleaning s-tnwjurface and SERS substrates are investigated. The multi-level hierarchy is combined with CuO nanowire and additional nanoscale structures. CuO nanowire, which has extremely high aspect ratio, serves as a base structure of multi-level hierarchy and additional flower like structures are placed on the CuO nanowires. Since as-fabricated CuO nanostructures are hydrophilic, the surface is coated with perfluorooctyltrichlorosilane in order to change its wetting property to hydrophobic. While those CuO based nanostructures have a sufficient roughness for superhydrophobic characteristics, hierarchical nanoflowers on nanowire structures lead to a self-cleaning surface. Furthermore, flower like nanostructures provide reentrant curvatures, thus enabling oleophobic property. The surfaces has a repellency even for a tiny droplet (10 nL) of low surface tension liquids (~35 mN/m). On the on hands, nanoflowers provide many number of nanoscale gaps. After a thin layer of silver is deposited on the surface of CuO nanostructures, those nanoscale gaps act as hot-spot for surface enhanced Raman scattering (SERS). To analyze SERS enhancement of the surfaces, Raman shift is measured with varying molar density of 4-Mercaptopyridine from mM to pM. From these results, hierarchical CuO nanostructures are suitable for self-maintenance and cost effective SERS sensing applications.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.167-172
• /
• 2017

Ultra-high performance (UHP) tires, for which demand has recently surged, are subject to severe strain conditions due to the low aspect ratio of their sidewalls. It is important to ensure sidewall material durability, since a sudden tire sidewall breakage during vehicle operation is likely to cause a major accident. In the automotive application of rubber parts, cracking is defined as a failure because when cracks occur, the mechanical properties of rubber change. According to Mars, Andre et al., strain and strain energy density (SED) are mainly used as a failure parameters and the SED is generally used as a fatigue damage parameter. In this study, the fatigue life curves of sidewall rubber of tires were determined by using the SED as fatigue damage parameter while the effect of aging on fatigue life was evaluated after obtaining the SED-Nf curves according to aging condition.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.132-138
• /
• 2016

Korea Aerospace Research Institute (KARI) is developing an electric-driven HALE UAV in order to secure system and operational technologies since 2010. Based on the flight tests and design experiences of the previously developed electric-driven UAVs, KARI has designed EAV-3, a solar-powered HALE UAV. EAV-3 weighs 53kg, the structure weight is 22kg, and features a flexible wing of 19.5m in span with the aspect ratio of 17.4. Designing the main wing and empennage of the EAV-3 the amount of the bending due to the flexible wing, 404mm at 1-G flight condition based on T-800 composite material, and side wind effects due to low cruise speed, $V_{cr}=6m/sec$, are carefully considered. Also, unlike the general aircraft there is no center of gravity shift during the flight because of the EAV-3 is the solar-electric driven UAV. Thus, static margin cuts down to 28.4% and center of gravity moves back to 31% of the Mean Aerodynamic Chord (MAC) comparing with the previously designed the EAV-2 and EAV-2H/2H+ to upgrade the flight performance of the EAV-3.